2010 Toyota Highlander BOLT brand vehicle and hitch locks

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to…

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7"…

I believe you are referring to something like the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers #PAL9555 which adds a power lock to the ARE camper shell on your 2016 Ford F-250. The only other thing that…

A 2016 Chevy Colorado should have a center cut transponder key so you would need the Replacement Lock Cylinder for BOLT Toolbox Latch - Codes to Center Cut GM Key #BL7023480. This is just the replacement lock cylinder so if…

Yes, for your 2014 Buick Enclave and your Falcon 2 tow bar you will need base plates #523149-1. I have linked the instructions and a video showing a typical installation for you. There are a few other things needed to flat tow a vehicle if you do…

Out of those two options, I recommend the 3" Drop B&W Tow & Stow 3-Ball Mount item #BWTS10047B for your 2019 Ford F-150. Both the 3" B&W Tow and Stow item #BWTS10047B…

Hi, The Curt Custom Base Plate Kit #C56JR is compatible with all Curt and Blue Ox tow bars so you could use the Blue Ox Avail Non-Binding Tow Bar #BX7420 to tow your 2021 Ford F-350. If you haven't picked out the rest of your flat…

The Blue Ox Apollo Non-Binding Tow Bar #BX7470 is going to be the largest size we have to fit a 2-1/2" receiver. So you will at least need a 3" to 2-1/2" Adapter #C85JR. This will connect to the Base…

Hey Bob, There is indeed a loading ramp from Thule that will work with any of the Epos bike racks - the Thule Epos 3-Bike Rack #TH69XE, Thule Epos 2-Bike Rack w/ LED Lights #TH49XE, and Thule Epos 2-Bike Rack #TH99XE. I went ahead and verified for…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…