Truck Bed Mats Specs:
Features:
Use this universal-fit, heavyweight tailgate mat with your DeeZee truck-bed mat to extend bump-and-scratch protection to your vehicle's tailgate. The thick rubber mat will not crack or break - even in extreme temperatures.
Tech Tip:
Mat may require trimming as it is a universal design for this bed size, not a custom fit.
More Information >Truck Bed Mats Specs:
Features:
Use this universal-fit, heavyweight tailgate mat with your DeeZee truck-bed mat to extend bump-and-scratch protection to your vehicle's tailgate. The thick rubber mat will not crack or break - even in extreme temperatures.
Tech Tip:
Mat may require trimming as it is a universal design for this bed size, not a custom fit.
More Information >Truck Bed Mats Specs:
Features:
...around them Optional tailgate mat available (BMC99TG - sold separately) Made in the USA Specs: Application: bare truck beds or those with spray-on liners Will not fit trucks with existing drop-in liners...
Installation Notes:
Does not fit in Flareside or Stepside models
More Information >Truck Bed Mats Specs:
Features:
...Applications: bare or spray-in liner truck beds Thickness: 1/2" Length: 78" Weight: 95 lbs Limited lifetime ...
More Information >Truck Bed Mats Specs:
Features:
...if you prefer a drill-free installation Snap installation allows you to easily remove and reinstall for cleaning Made in the USA Specs: Application: bare truck beds or those with spray-in liners or drop-in...
More Information >Truck Bed Mats Specs:
Features:
...the truck bed and tailgate Made in the USA Specs: Application: bare truck beds or those with spray-on liners Will not fit trucks with existing drop-in liners Thickness: 3/4" Limited lifetime warr...
Installation Notes:
Does not fit in Flareside or Stepside models
More Information >Truck Bed Mats Specs:
Features:
...tie-down anchors through the liner or cut small slits to fit around them Waterproof, 1/4" thick, closed-cell foam polypropylene backing Fits bare tailgates or those with spray-on or drop-in liners
Installation Notes: Does not fit in Flareside or Stepside models
Truck Bed Mats Specs:
Features:
...tie-down anchors through the liner or cut small slits to fit around them Waterproof, 1/4" thick, closed-cell foam polypropylene backing Fits bare tailgates or those with spray-on or drop-in liners
More Information >
Truck Bed Mats Specs:
Features:
...Custom-fit liner protects your vehicle's bed and cargo from damage Heat-molded design perfectly fits the contours of your truck bed Ribbed, non-slip surface prevents cargo from shif...
Installation Notes:
Does not work in trucks with Flareside or Stepside bed
More Information >Truck Bed Mats Specs:
Features:
...if you prefer a drill-free installation Snap installation allows you to easily remove and reinstall for cleaning Made in the USA Specs: Application: bare truck beds or those with spray-in liners or drop-in...
Installation Notes:
Does not fit on vehicles with a Flareside or Stepside bed
More Information >Truck Bed Mats Specs:
Features:
...Custom-fit liner protects your truck tailgate and cargo from damage Heat-molded design perfectly fits the contours of your truck's tailgate Ribbed, non-slip surface prevents cargo ...
More Information >Truck Bed Mats Specs:
Features:
...Custom-fit liner protects your truck tailgate and cargo from damage Heat-molded design perfectly fits the contours of your truck's tailgate Ribbed, non-slip surface prevents cargo ...
More Information >Videos
for Truck Bed Mats
Help Articles
for Truck Bed Mats
Expert Answers
for Truck Bed Mats
I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine,…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...The hub/drum you sent in a picture of is a Lippert 8,000 lb axle hub with an 8 on 6-1/2 inch bolt pattern designed for oil-bath applications. The correct replacement then is the #8-285-10UC3-A.
view full answer...Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…
view full answer...The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…
view full answer...It sounds like you are on the right track for tracking down where the issue is. That said, the integrated brake controllers they were putting in trucks around 2008 weren't as reliable as the ones they've been installing since then.…
view full answer...It sounds like you need to re-calibrate the zero point on your Lippert Ground Control 3.0 #LC304136 system. Below I've listed out the steps you'll need to follow and will allow you to use the auto leveling again. Zero Point Calibration The…
view full answer...I reached out to my contact at Lippert and they said that it sounds like you just aren't holding the 4 buttons for the reset long enough. It requires 5 seconds, but many people will count to 5 a little too fast and the system won't reset. He…
view full answer...Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the TracRac SR #TH43002XT-508…
view full answer...The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…
view full answer...The 1-7/8 inch width is what is rounded up to 2 inches which is a standard width for winch straps. The 14 foot length is not something we carry. I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs #DL24239 or…
view full answer...The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…
view full answer...