# 1
K-Source Universal Towing Mirror - Clip On - Convex Mirror - Qty 1
After years of replacing mirrors from other sources I purchased a pair of these. There fantastic, plenty of adjustments. Got covid on vacation, really sick and did not properly install mirror. Not broken but scratched badly from asphalt at 55 mph. Purchased a replacement, scratched one is my spare.
These mirrors are good, but not great. I bought these because nothing else fits my 2004 Ford Expedition. They allow me to see around my trailer much better than the factory mirrors, but the have a slight vibration driving down the road. They also make a very noticeable noise from the wind going between the factory mirror and this product. Finally, one of the straps came off when I tightened it a bit too much, but didn't break. The picture below was done in humor (I took my trailer through a drive through, thought it was really funny, and had to take a picture. The picture is a good shot of the mirrors.)
# 2
K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair
These worked great on my wife's Yukon. Installation instructions were clear and direct. They held up very well traveling 75 mph down the interstate; No jostling around or coming loose. I loved the additional two mirrors. Having the three total different angles while pulling a trailer was extremely helpful. Would highly recommend this setup.
ordering was easy. the product was delivered quickly and without damage. I have a 2023 Colorado Z71 and was concerned about how the towing mirrors were going to attach to the tapered factory mirrors. the fit is superb. no movement during use so far.. I would recommend these to a friend.
# 3
K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2
After reading lots of reviews on several mirrors, I decided to buy the K-Source Universal Towing Mirrors. Oh how I wish my truck could use the ones that slip over the existing mirrors! I was prepared for a fight, based on reviews, and boy did I get one! I truly needed a third hand when figuring out how to attach these. I was bound and determined that I could do this on my own. No mirrors were going to defeat me! I did ask my husband to come look at them. He started to help but I shewed him away. After a lot of words that don’t normally come out of my mouth and a few tears, the first one was on! Then I had to go do it again in the other side! I’m pretty sure the neighbors heard me yelling. But I persisted! Lo and behold, this 67 year old Grammy did it! It was clear they would not stay on by themselves, so I grabbed a couple of bungee cords and wrapped them around the housing and they aren’t going anywhere. I have left them on my truck. No way I’m going thru that every time we return from camping. I will take them off at the end of camping season. Delivery was really fast. I was disappointed that one box was brand new and the other was smashed and taped, an obvious return. I would have been very unhappy if there was a piece missing or if something was wrong since this was my first purchase with etrailer. Overall, the mirrors work, they do not shake and I find I don’t use the truck mirrors now. Very happy with my purchase.
Fitted on 2024 Toyota Tundra SR5 CrewMax Cab w/ Stock Mirrors No vibration issues with either mirror. Turned left and right side clip on mirrors vertical so the did not overlap truck mirrors. Right side no problem with attachment and was able to adjust truck mirror. Could also see father back along right side of a 24’ travel trailer than just looking in truck mirror. Don’t expect to see behind on right side any vehicles tucked up close. Left side mirror attachment had to be modified so I could adjust truck mirror without interfering with clip on mirror lower L “hooks”. I put a rubber blocks under the lower L hooks so they were low enough to get under truck mirror glass yet still clamp to truck mirror housing. A picture tells the story. 7,000 km/4,200 miles later and neither mirror has loosened or moved. No vibration or distortion. Yes, I ran 2 zip ties as safety “chains” from the back straps to truck mirror arm just in case, they’re barely snug. I recommend these.
# 4
CIPA Universal Fit Towing Mirror - Clamp On - Adjustable Length - Steel
Mirrors work exactly as intended, greatly improving rear vision when towing our pontoon behind our 2014 Tacoma. Store nicely in the compartment under the rear seat.
Excellent product. Easy to put on. Took them off, put them in my camper storage. Next trip out, when I put them on, I did not even need to adjust them! The mirrors are slight contour and slight magnification, which makes them easy to see. There is virtually NO vibration during travel. (I have had others that shimmied so bad you could not see a thing.) I flip my driver side mirror in frequently to check my mail box, so it is not very stiff. So I ran a small bungee from the clamp to the grill under my hood. Did this for both sides. My driver side flipped in when traveling at interstate speeds, so I put a second bungee on it. Fixed the problem. Allen bolts at top of clamp are rusting after 2nd use. All in all though, I am very pleased with this product and it is well worth the money spent. It is the only product I could find to properly fit my 2011 Toyota Tacoma, because it clamps on the mirror frame and does not rest on my truck mirrors. Great Product!
# 5
CIPA Universal Towing Mirrors - Clamp On - Qty 2
So far, so good. I received the CIPA mirrors today and immediately installed them. Installation instructions are straight forward. I took a test drive of about 15 miles; there was no noticeable shake or rattle and the mounts did not loosen. As with factory curbside mirrors, objects are closer than they appear with the CIPA mirrors, too. Our first trip towing is a couple weeks from now. I will update my review after the trip.
The view is excellent. The mirrors do not vibrate. In speeds over 50mph, the tube would turn inside the clamps and the mirrors would turn upward, making them useless. Solution: I cut off a finger from a nitrile rubber glove and pushed it over the tube. Now the mirrors stay put.
# 6
CIPA Universal Towing Mirror - Clip On - Qty 1
The good: inexpensive; decent quality materials The bad: doesn't hold it position very well during extensive or high speed travel - you have to readjust at nearly every stop for gas on a trip. Conclusion: It is worth the money due to its fair price.
Purchased a pair for our 2017 Jeep Grand Cherokee towing a nuCamp 400 from FL to AK and back. Three months and around 16k miles. Pros - other than an adjustment the second day, I never had to adjust the tension straps again. They were easy to mount and did not interfere with our mirrors folding inward. They weathered three months on the road without issue though I was beginning to worry about the straps becoming brittle. I noticed this once I removed them. Had I kept them, I would have used some silicon to rejuvenate the rubber. Cons - the only con is they shake. They shake to the point that sometimes I couldn't distinguish what exactly was behind me. I knew there was a vehicle, but the distortion from the vibration prohibited me from getting a clear view of exactly what was behind us. Impressions - they worked for our trip but I knew I would want something else for our next long trip, so we invested in a Furrion Reviewing Camera.
# 7
CIPA Universal Fit Dual-View Towing Mirror - Clip-On
Pros: Very easy to install. Will fit on almost anything. Cons: Bit of a challenge to adjust the in/out tilt on fixed mirror housings. Would like a little more height, but it's OK. This is a good solution for the casual user like me. Installation is painless. If you need more control over height or tilt, this is not for you.
I bought the trailer mirrors for my Jeep Grand Cherokee to pull my pull behind trailer. See pictures. The mirrors attach easily and securely and shake very little when driving. I need them mostly when backing up and I can see where the trailer tires are going. The mirrors do not adjust easily but when you do they stay in place. What I especially like is the size of the mirrors and having two independent mirrors.
# 8
CIPA Universal Towing Mirrors - Clip On - Qty 2
The company was fast and gave lots of updates for shipping. Once i received product my concerns were met. The straps are BARELY long enough to connect around my mirror. Once it is straped properly the tension on straps pulls them right out of the retaining clip. I ordered these because i have a 11 silverado just like what was in the product pictures. Save your money and get something else because theres no way these will make it down the highway they will barely stay on just sitting here. Kinda disappointed because i bout these for our first camping trip this weekend but these will not work. Seems like a good company just crappy product.
So-so construction and design. With one modification they're more than acceptable. The arms and straps will slip and loosen if installed on triangular or tapered housings. Mirrors that have backs nearly parallel to the mirror face, and have upper and lower mirror edges that are nearly parallel are not affected. Adding a peel and stick plastic wall hanger to a tapered housing will stop the strap from slipping and loosening. The ball and socket mount is good and tight, but the stud on the ball is loose in the arm. I think most of the jitter and vibration others report is from this sloppy clearance that the stud screw can't tighten enough. I'll be addressing that as well. A nice option for those of us that a) don't tow a majority of the time and don't want full time extended mirrors, and/or b) tow with multiple vehicles and prefer to have adjustability to fit our 'fleet'.
# 9
CIPA Universal Dual Lens Towing Mirrors - Clip On - Qty 2
Unable to tighten mirror clamps enough to eliminate mirror from shaking, preventing clear image while driving.
Toyota HighlanderThe mirrors were just what I needed and work well on my Toyota highlander.
# 10
K-Source Universal Towing Mirrors - Clip On - Flat Mirror - Qty 2
I went right away to try them on my truck. I have a 24 Denali ultimate 1500 Denali and I have a couple of cameras on my side mirrors. The straps are easy to maneuver around the cameras to avoid issues there. Good snug fit I have not taken it out yet to test these in real road conditions but so far so good.
ChevroletWorked well and as expected. Still can't see as far behind the camper as I would like on the passenger side. Strap them on tight. They shook very litte but some, not enough to be bothersome. Later,I did find them less expensive elsewhere, oh well. Straping them on is tricky to not cover the cameras underneath the truck mirrors. Truthfully I use the camera on the back of the camper along with these mirrors and get additional views from the Chevy cameras as well. I'm not a truck driver and only pull the camper on occasion so I need all the "eyes" I can get especially driving through Nashville and Atlanta.
# 11
CIPA Custom Towing Mirror - Slip On - Driver Side
They are very easy to install and remove when parked for extended periods. Costumer service was very helpful with getting me the correct marrows.
Great product! I use them on all my trailers as well as my travel trailer. This is actually me second set...the first got destroyed by a hit n run and i could not live without them!
# 12
Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
I have not used them as of yet, but the fit is very good. The quality is very good as well. I was surprised that I could get towing mirrors for my 2001 Toyota Sequoia.
5,000 plus miles and counting. Leave them on even when not towing. No wiggle. Mountings still secure. Aerodynamic and much more attractive than other mounting systems. Pricy but well worth it. Toyota did not even offer towing mirrors for the 1st generation Tundras!!!
# 13
CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
Only used twice as I found Tundra's stock mirrors were more than adequate for camper we were towing. I found mirrors were finicky to install without marring stock mirrors and never had a good feeling about security even though I never lost one at highway speeds.
For the money, these work really well. My Tundra really needed these so I could see for lane changes with our 23’ travel trailer. I don’t notice any excessive vibration they makes it difficult to see. The only knock on them is making sure you get the insert lined up correctly when you’re putting them on. If it’s not lined up right they can work loose and fall off, but it’s as much operator error as it is design flaw.
# 14
Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
2018 Chevrolet Silverado 1500These mirrors fit perfectly on my 2018 Silverado. They give me a much better view of the trailer and adjacent highway lanes. I would have given it 5 stars but the right mirror is difficult to adjust. I had to go from drivers seat to side mirror and back many times to get it to where I wanted. That's probably just part of the regular process. I don't know how that could be improved. It attaches and is removable very easily.
Easy to install, and works as advertised. Shipping was fantastic. Thanks etrailer.
# 15
CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
As usual etrailer provided great service and prompt shipping. The product appears as described however I have not installed them.
Installation was very easy and secure. On test run there was no vibration angles remain constant for easy rearview examination
# 16
CIPA Custom Towing Mirror - Slip On - Passenger Side
I received 2 orders now from Etrailer, one I did online and one soeaking with their agent and both arrived fast and as ordered! Great job very satisfied with product as well! Thank you!
Rather on the high side on cost but they are easy it install and remove. Field of vision is not what it could be but better than the mirrors on the truck.
# 17
CIPA Custom Towing Mirror - Slip On - Driver Side
The mirrors help me tow our Lance trailer safely. The adjustable mirrors benefited with a touch of dry lubricant on the joint inside the housing. Emily at etrailer was very helpful!
First set had a factory defect. The hole for the tension knob was not threaded. Replacement sent was also a defect, the mirror panel swivel was un-adjustable. Spend the extra money and get the correct OEM ones for your vehicle.
# 18
CIPA Universal Fit Towing Mirrors - Clip-On - Qty 2
Haven’t had a chance to use these but did put them on my truck to get them adjusted. Easy to install and look like they will give me good coverage.
The Universal fit towing Mirrors-THis is easy to put on and off and gives great visibility when towing our boat
# 19
CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
Excellent Product…Easy to Install and the instructions were very easy to understand… These Mirrors fit perfectly on my 2016 Ram 2500 SuperCrew 4x4 Truck
So far this might do the trick . A bit concerned on stability after long trip .. we shall see in time !! The passenger side is not as tight as drivers .. again time will tell .
# 20
Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
These mirrors helped tremendously when towing my Micro Minnie travel trailer versus stock mirrors on my GMC SIERRA 1500. The extended mirrors enabled to better determine when it was safe to move back into my lane after passing a vehicle and allowed me to see better the vehicles behind trailer. Although there was an occasional slight vibration in the passenger side mirror, it did not disrupt the usability of the mirrors. The towing mirrors took only a minute or two to install and fit perfectly on the stock mirrors. Adjusting them properly takes a little more time and is easier when a second person helps. I am extremely pleased with this purchase!
The mirrors were extremely easy and the fit is perfect. These look almost like a factory option installation. All lamp and cameras are exposed and not blocked. The individual mirrors are easily adjustable. Great product! Very pleased.
Best 2022 Toyota Highlander Towing Mirror Options
Hey everybody, Ryan here at etrailer. Today we're gonna be checking out our best towing mirror options for 2022 Toyota Highlander. When it comes to picking out a towing mirror for the Highlander, there's a ton of different choices out there, and so the purpose of this video is to kinda just try to simplify things, and I grabbed five towing mirrors that I think are really good fits for the Toyota so we're just gonna kinda run through them. And I kinda broke 'em down into two different categories. So these two mirrors, and the one that we also have on our Highlander. These here all have like rubber straps here that essentially just kind of clip on.
Best 2021 Toyota Highlander Towing Mirror Options
Hi, everybody, Ryan here at etrailer. Today we're gonna be checking out our best towing mirror options for your 2021 Toyota Highlander. So, when it comes to picking out a towing mirror for the Highlander and there's a ton of different choices out there. And so the purpose of this video is to kinda, just try to simplify things. And I grabbed five towing mirrors that I think are really good fits for the Toyota. So we're just gonna kind of run through them.
Best 2020 Toyota Highlander Towing Mirror Options
Hey everybody, Ryan here at etrailer. Today, we're gonna be checking out our best towing mirror options for 2020 Toyota Highlander. So, when it comes to picking out a towing mirror for the Highlander, there's a ton of different choices out there. And so, the purpose of this video is to kinda, just try to simplify things and I grabbed five towing mirrors that I think are really good fits for the Toyota. So, we're just gonna kind of run through 'em. And I kind of broke 'em down into two different categories.
Setting up the CIPA Universal Fit Towing Mirror on your 2019 Toyota Highlander
Ryan: Hey everybody, Ryan here at etrailer.com. Today on our 2019 Toyota Highlander we're going to be taking a look at and showing you how to install the CIPA Universal Fit Towing Mirror, which also comes as a set. Our towing mirror is really going to expand our field of view. That's going to be especially useful when we're towing a trailer and needing to make those lane changes, backing up into a tight spot, or just wanting to keep a close eye on what's going on behind us. As you can see, I'm visible in our towing mirror, but not in our factory mirror. And that'll give you an idea of how much more you're just going to be able to see.
Set up: CIPA Universal Fit Towing Mirror on a 2018 Toyota Highlander
Speaker 1: Today we're going to be test fitting CIPA's clamp on towing mirror, part number CM11980. These also come in a quantity of two with part number CM11980-2. As you can see here, I'm clearly visible in our factory mirror, but as I take a step towards the outside I'm no longer visible in our factory mirror, but I can be clearly be seen in our universal towing mirror. This is particularly useful when merging onto the highway, changing lanes, and during parking maneuvers. This large mirror can be adjusted both vertically and horizontally. It can also be extended by loosening the nut located on the rod here and then pulling the mirror out.
Setting up the CIPA Universal Fit Dual-View Towing Mirror on a 2018 Toyota Highlander
Speaker 1: Today on our 2018 Toyota Highlander, we're gonna be test fitting CIPA's Universal Fit Dual-View Towing Mirror, part number 11953. You can also get these in a quantity of two with part number 11953-2.So as you can see here, I'm clearly visible in our factory mirror. But as I take a step towards the outside, I'm no longer visible in our factory mirror, but I can still be seen in our universal towing mirror. This is particularly useful when merging onto the highway, changing lanes, or during parking maneuvers.This universal towing mirror has two different types of mirrors in it. The outside mirror is gonna be a convex mirror, so it's gonna give you a larger range of view. And next to that, you're gonna have a flat mirror, which is gonna give you a more accurate view.
Installation Guide for the K-Source Universal Dual Lens Towing Mirrors on a 2018 Toyota Highlander
Speaker 1: Today on our 2018 Toyota Highlander, we're going to be test fitting K Source's dual lens universal towing mirrors, part number KS3990. And as you can see here, I'm clearly visible in our factory mirror, but as I take a step towards the outside, I'm no longer visible in the factory mirror, but I can be seen in our universal towing mirror. This is particularly useful when merging onto the highway, changing lanes, or during parking maneuvers. Each lens is adjustable both vertically and horizontally, and each lens has a unique characteristic. This one's going to be flat, so it's going to give you a more accurate representation of what's behind you, and this mirror's convex, so it's going to give you a wider field of view.Now, you do want to remember that things in a convex mirror may be closer than they appear. While your mirror's installed, you can still adjust your factory mirror in all directions.
Setting up the K-Source Universal Towing Mirror on a 2018 Toyota Highlander
Speaker 1: Today on our 2018 Toyota Highlander, we're going to be test fitting K-Source's Universal Towing Mirrors. Part number KS-3891. You can also get these in a quantity of two with part number KS-3891-2.As you can see here, I'm clearly visible on our factory mirror, but as I take a step towards the outside, I'm no longer visible on our factory mirror, but I can still be seen on our Universal towing mirror. This is particularly useful when merging onto the highway, changing lanes or during parking maneuvers.This large Universal mirror can adjust both up, down, left, and right. You can also rotate the mirror to have the longer length be vertical by loosening the screw located on the back side. Once you've got it where you want it, just tighten the screw back down.While the mirror is installed, your factory mirror can still be adjusted in all directions.
Step-By-Step Installation Tutorial for the CIPA Universal Towing Mirror on a 2018 Toyota Highlander
Speaker 1: Today on our 2018 Toyota Highlander, we're going to be test fitting CIPA's Clip-on Universal Towing Mirrors, Part Number 7070. You can also get these in a quantity of two with Part Number 7070-2.As you can see here, I'm clearly visible in our factory mirror, but as I take a step towards the outside, I'm no longer visible in our factory mirror, but I can still be seen in our universal towing mirror. This is particularly useful when merging onto the highway, changing lanes or during parking maneuvers.This universal towing mirror can be adjusted both vertically and horizontally, and if you'd like a wider plane of view, you can rotate it until it's horizontal. While it's installed, you can still adjust your factory mirror, and the breakaway function of the mirror can still be utilized without contacting the body of the vehicle.It's held onto your mirror with two rubber straps. The rubber material won't cause any scratches or abrasions to the back of your mirror and help hold it in place, and while it's installed, you'll still have full visibility of your mirror side marker.What's nice about these also is that they can be quickly changed from one vehicle to another if you've got multiple vehicles or multiple trailers that you use.We'll begin our installation by lining up the hooks with our towing mirror edges here and holding it in place. We'll then bring the straps around the back side and clip them on the hooks on the top.
DIY 2017 Toyota Highlander Installation for the CIPA Universal Towing Mirror
Today on our 2017 Toyota Highlander we're going to be doing a test fit of the CEPA clip on towing mirror, part number 7070. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park or even back up while towing a trailer or a camper. As you can see I'm visible in the towing mirror but not the factory mirror. If I take a few steps in towards my trailer, as you can see there's no blind spot by the way we've got it set up but this is the view you get with just your factory mirror. The mirror itself can be rotated 360 degrees so if you'd like to keep it at that horizontal position for a different view, you have that option. Now it can also be adjusted to most angles.
Set up: CIPA Universal Fit Towing Mirror on a 2017 Toyota Highlander
Today on our 2017 Toyota Highlander, we're going to be doing a test fit of the CIPA Universal Bar Clamp-On Towing Mirror, part number CM11980. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even back up while towing a trailer or a camper. As you can see I'm visible in the towing mirror but not the factory mirror. Now, if I take a few steps in towards my trailer, as you can see there's no blind spot by the way we have it set up, but this is the view you get with just your factory mirror. The mirror itself can be rotated 360 degrees, so if you'd like to keep it at that horizontal position for a different view, you have that option. Now it can also be adjusted to most angles.
DIY 2017 Toyota Highlander Installation for the CIPA Universal Fit Dual-View Towing Mirror
Today, on our 2017 Toyota Highlander, we're going to be doing a test fit of the CIPA 00:00:03 dual view clip-on towing mirror, part number 11953. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even back up while towing a trailer or a camper. As you can see, I'm visible in the towing mirror but not the factory mirror. Between the two mirrors, the larger one's going to give us an accurate perspective of what's behind us. The smaller mirror is going to be our spot mirror.
Step-By-Step Installation Tutorial for the CIPA Universal Towing Mirror on a 2016 Toyota Highlander
Today, on our 2016 Toyota Highlander, we're going to be test fitting the CIPA Clip-On Towing Mirror, part number 7070. The mirror itself is going to offer a wider field of view while you're driving. As you can see right now, I'm just in the towing mirror, but if I take a few steps over, now you can see me in the regular mirror. This towing mirror is a universal fit. It has adjustable straps that wrap around the back and won't block your turn signal on your mirror, and also, you can still push it in if you need to. The universal towing mirror will not keep your actual mirror from moving wherever you need it to move.
Install: K-Source Universal Towing Mirror on a 2015 Toyota Highlander
Today, on our 2015 Toyota Highlander, we're going to be doing a test fit on the K Source Universal Clip-On Towing Mirror. That's part number KS3891. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park or even back up while towing our trailer or camper. As you can see, I'm visible in the towing mirror but not the factory mirror. Now if I take a few steps in towards my trailer, as you can see, there's no blind spot by the way we have it set up. But this is the view you get with just your factory mirror. The mirror itself can be adjusted to most angles. We've got our up and down.
Set up: CIPA Universal Fit Dual-View Towing Mirror on a 2015 Toyota Highlander
Today on our 2015 Toyota Highlander we're going to be doing a test fit on the Cipa Dual View Clip On Towing Mirror. That's part number 11953. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even back up while towing a trailer, or camper. As you can see, I'm visible in the towing mirror, but not the factory mirror. Between both mirrors, you get the same view, just a closer more clearer view in the larger mirror. If I take a few steps in towards my trailer, as you could see there's no blind spot by the way we have it set up. This is the view you'd get with just your factory mirror. Both the larger and the smaller mirror can be adjusted to most angles. We've got our up and down, diagonal, and side to side. The tabs here are not going to interfere with the operation, or movement of our factory mirror.
Setting up the CIPA Universal Towing Mirror on a 2013 Toyota Highlander
Today on our 2013 Toyota Highlander, we'll be doing a test fit on the CIPA clip-on towing mirror, part number 7070. It offers us a wide field of view, it's going to allow us to safely and easily change lanes, pass, park, or even back up while towing a trailer or camper. As you can see, I'm visible in the towing mirror, but not the factory mirror. If I take a few steps in towards my trailer, as you can see, there's no blind spot by the way we have it set up, but this is the view you get with just your factory mirror. The mirror itself can be rotated 360 degrees, so if we like that side view, we can keep it wherever we want. We can also adjust it up or down, diagonal, or left or right. Each one of the clips here is not going to get in the way of the operation or movement of our factory mirror, and we can even still fold it in. Here on the back side, it uses two rubber straps to secure it in place around the factory mirror.
Mount: K-Source Universal Towing Mirror on a 2013 Toyota Highlander
Today on our 2013 Toyota Highlander, we'll be doing a test fit on the K-Source Universal Clip-On Towing Mirror. That's part number KS3891. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even back up while towing a trailer or camper. As you can see, I'm visible in the towing mirror but not the factory mirror. Now, if I take a few steps in towards my trailer, as you could see, there is no blind spot by the way we have it set up, but this is the view you get with just your factory mirror. The mirror itself can be adjusted to most angles. We've got our up and down, side to side, and even diagonal.
Setting up the CIPA Universal Fit Towing Mirror on a 2013 Toyota Highlander
Today on our 2013 Toyota Highlander we'll be doing a test fit on the CIPA Universal Bar Clamp On Towing Mirror. That's part number CM11980. It offers a wide field of view, it's going to allow us to safely and easily change lanes, pass, park or even back up while towing a trailer or camper. As you can see I'm visible in the towing mirror, but not the factory mirror. Now if I take a few steps in towards my trailer as you can see there's no blind spot by the way we have it set up, but this is the view you get with just your factory mirror. The mirror itself can be rotated 360 degrees and can be adjusted to most angles. Got our left and right, up and down and diagonal.
How to Set Up Your CIPA Universal Fit Towing Mirror on a 2008 Toyota Highlander
Today on our 2008 Toyota Highlander we'll be doing a test fit on a CIPA Universal Bar Towing Mirror, part number CM11980. It offers a wide field of view, it's going to allow us to safely and easily change lanes, pass, park or even back up while towing a trailer. As you can see I'm visible in the towing mirror but not the factory mirror. If I take a few steps in towards my trailer as you can see there's no blind spot by the way we've got it set up, but this view you get with just your factory mirror. The mirror itself can be rotated 360 degrees and can be adjusted to most angles. Got her up and down, side to side and even diagonal. By loosening up the large nut up top here it allows us to extend our mirror out to better suit our towing needs.
Step-By-Step Installation Tutorial for the CIPA Universal Towing Mirror on a 2008 Toyota Highlander
Today on our 2008 Toyota Highlander we'll be doing a test fit on the CIPA Clip On Towing Mirror, part number 7070. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even back up while towing a trailer. As you can see I'm visible in the towing mirror but not the factory mirror. If I take a few steps in towards my trailer as you can see there's no blind spot by the way we've got it set up. This is the view you'd get with just your factory mirror.
Setting up the CIPA Universal Fit Dual-View Towing Mirror on a 2008 Toyota Highlander
Today on our 2008 Toyota Highlander, we'll be doing a test fit on the CIPA Dual-View Clip-On Towing Mirror, part number 11953. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even back up while towing a trailer. As you can see, I'm visible in the towing mirror but not the factory mirror. Between both mirrors, you get the same view, just a slightly larger, more closer view in the larger mirror. If I take a few steps in towards my trailer, you could see there's no blind spot, by the way we got it set up, but this is the view you'd get with just your factory mirror. Both the larger and the smaller mirror can be adjusted to most angles.
What our customers are saying:
"Quick processing, and delivery. reasonably priced very satisfied"