Most Popular Hitch Extender for 2021 Honda CR-V

Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.

Click to Enlarge

Click to Enlarge

Click to Enlarge

1 1/4" extension fit well (could be a tiny more snug). but was just what i needed for my mini cooper and new bike rack. Fast Ship good price and I would use them again. Now i can use my bike rack! :)

Click to Enlarge

I needed my bike to clear my bumper on a front hitch and this did the trick. This extender is hollow so I was able to use anti rattle/ lock before adding bike rack.

Click to Enlarge

Click to Enlarge

Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.

Perfect fit to extend the hitch to allow my bike rack to clear the back bumper. Great quality as well.

Click to Enlarge

This hitch extension was exactly what I needed. New hitch on the Toyota Avalon has the receiver box a little too far under the bumper to fit my bike carrier. The diagonal support on the carrier didn't allow hitch pins to align without modifying (cutting) bumper. This extension was a simple yet effective solution to moving the carrier away from rear of vehicle. (Photos were taken without hitch pin in place) The item was in stock and shipped rapidly. Thank you etrailer.

Click to Enlarge

Click to Enlarge

This is a very good product. However you need to be careful what vehicle and bike rack that you intend to use with it. My vehicles 2" hitch was not hollow past the end and the hitch extender bottomed in the hitch before the 2nd hole could be lined up and used. So the 2nd hole on the vehicle side was unusable. Then using the Swagman Chinook 2 bike rack I found that the bike rack hitch could not be inserted deep enough into this hitch extender to be able to use the 2nd hole in the extender, on the rack side. With that situation I was not able to use the 2 holes that would get the bike rack installed in the shortest distance from the rear of the. vehicle.

The "Hitch Extender" that I ordered works great. Everytime I go RVing in my Winnebago MH I utilize it. Jerry Barnes

Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.

Click to Enlarge

I bought this Dual Purpose Receiver at Twice the price of that Big online company because of reviews from owners that bought on both sites. After evaluating the reviews, I chose to go with etrailer because I have come to trust them as a company that gives you a great product that they will stand behind and they appreciate your business. I haven’t used this receiver yet, but can look at it and I am comfortable that I made the right choice. I will follow up with another review after I use it.

I was surprised by just how solid and heavy it was made. Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged. The hitch sits under the bed and this extends it out so it is useable.

Click to Enlarge

The hitch extension worked perfect. The only one that was 18" pin to pin which was exacty what I needed to make this combo work. Dual hitch to start. Top whole a luggage rack to haul coolers and the bottom for the bike rack. Thanks etrailer.

Click to Enlarge

I recently had a hitch installed on my car. Since the cargo carrier that I have was used previously without an adapter, I assumed that I didn't need one. Now trying to locate one was more of an effort than locating a hitch. The local auto parts stores of national brands don't keep them in stock. One store made an inquiry but didn't give me much hope. Now I can make a rode trip in confidence that the carrier will be secure as I head down the interstate.

Click to Enlarge

Click to Enlarge

Quality product and excellent service from etrailer.com! The Hitch Extender works well allowing me to back my boat trailer further into the deeper water.

Click to Enlarge

This tow bar extension is a quality built product.. Very helpful backing a trailer.

I have included some photos of the hitch extension. The first two are just on my truck without and with the extension. Without the extension, note the proximity of bike handlebars to the tailgate. In the second photo with the extension, the handlebars are much removed from the tailgate. Note that this is a ¾ ton truck with an insert in the receiver. With the insert in place, the front holes of extension did not align with the receiver. It was short 1/8 to 3/16 inch. If needed, I could solve this issue with a smaller bolt. The next photos are without and with the extension in the receiver of our RV. With the cover on RV the dramatic effect of extension is not so obvious. In the first photo without the extension, the handlebars of bike literally contact the back of RV. In contrast in the second photo, the handlebars are 5 to 6 inches from the back of the RV. Though there are no road trips yet, I am confident that the hitch extension will protect the bike and importantly will protect the back of the RV. I hope that these comments and photos are useful to you. If no, I can try again in spring when we remove cover from the RV.

Click to Enlarge

Click to Enlarge

Perfect for my application.

Works great! I use it on my motorhome to carry my bikes with a Rocky Mounts Carrier and flat tow my car with my Blue Ox system. It places the bike carrier at an optimal height over the front of the car but my may be different for other bike carriers. Very sturdy and seems to be quality all around.

This Brophy Hitch Extender with Step worked GREAT! Allowed me to keep the tailgate on on truck down so I could load my ATV into the truck bed and still tow the trailer with stabilizer bars without banging into the trailer jack.

We are using this extension on a truck with a 8 ft bed and popup truck camper. We are pulling two horses in a 12ft steel stock trailer. The step helps for getting into the camper. The only thing that I don't like is that it adds one more sloppy joint between the trailer, but I don't think I could have the truck camper and still pull the trailer without worrying about hitting the trailer without it. Other than that, it is very well built and solid. I would buy it again for sure. I have been happy with purchasing trailer products from etrailer and will do so in the future when the need arises.

I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!

Click to Enlarge

First off, I love Curt products. When I found this item at Etrailer at this low price I was shocked. I was prepared to receive a knock off. I tried my luck and was amazed the product not only showed up at my doorstep the next day but is a very high quality Curt product. My handyman was working on the house and he couldn’t believe the quality at that price. Thanks Etrailer! You are my new go to for my traveling needs.

The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.

This extender does a pretty good job of keeping my bike away from the rear radar system in my Venza so the backup warning system does not engage in error. Beware it’s pretty heavy.

It works great,by moving the trailer back from the vehicle you can load longer items,so there are not hanging over the back of the trailer. It also helps in the backing of the trailer. Thank You

Click to Enlarge

I would like to have the actual distance from the weld joint to the hitch pin hole of 4 1/2". This unit is slightly less than that.

We were looking for a solution to haul our utv when pulling our camper. This extender allowed us to leave the tailgate down and still have enough clearance to not damage the tailgate. Downside--this extender amplifies the amount of movement with the hitch. This is more than a simple hitch clamp could fix. I added several modifications to completely eliminate the hitch movement. We have taken several trips since the installation and no issues with pulling the trailer. We did have to extend the safety chains about 4 links. Overall a good product and it accomplished the goal. As always,etrailer personnel are knowledgeable, easy to deal with and have quick shipments.

Click to Enlarge

Click to Enlarge

Click to Enlarge

My truck has a 2-1/2" receiver. I already owned a heavy duty 2" hitch. This 2" reducer & extender was perfect for my use. I used it to tow a rental trailer and needed to extend my receiver to allow me to tow with the tailgate down. This reducer/extender did the trick. I had plenty of room making tight u-turns. The quality of the product is very good. I would recommend this product to others.

Click to Enlarge

I think it is a great product but expensive. In retrospect I could not do what I wanted with the truck and hitch so I spent the money needlessly. Not any fault of your company. I would have been just as well to leave the stock OEM and not spent the money anyway. Live and learn.

At first I was skeptical but now that I’ve put it together I’m very impressed. This thing is heavy duty and pulls my trailer no problem. Korren did a great job helping me out. Excellent customer service.

Click to Enlarge