# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Fit well and seems nicely made. Nicely finished with no sharp edges and uniform paint.
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
# 2
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Very fast service. Thanks.
# 3
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
for a little more money, get this one !!!
Very easy to install on our 2014 VW Tiguan!
# 4
Curt Class II Euro Style Drawbar with 2" Ball - 2-3/4" Rise - 3,500 lbs
I was looking for the euro-style drawbar for our 2017 VW Tiguan, because we are going to have it shipped back to Europe. And I found one here in the USA at etrailer.com. So we do not have to convert our hitch in Europe. Good and solid product.
Nicely made and elegant looking. But will not fit a receiver where the center of the hitch pin hole is more than 2-5/16" from the end of the receiver. The straight portion of the ball mount starts to fatten out to more than 1-1/4" wide at that point which means it won't work for some longer receivers like my OEM VW one. Not a product fault, but something to measure before ordering one.
# 5
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Fit well and seems nicely made. Nicely finished with no sharp edges and uniform paint.
Sara R was helpful helping me find the right hitch for what I described as needing. I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression. Overall, excellent customer service and product.
# 6
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
for a little more money, get this one !!!
Very easy to install on our 2014 VW Tiguan!
# 7
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
Purchased a vehicle with a class 2 factory hitch installed. This was the proper drop to haul my band trailer. First trip went without an issue.
# 8
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
Great product and fantastic service.
Great quality.
# 9
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
I was looking for the euro-style drawbar for our 2017 VW Tiguan, because we are going to have it shipped back to Europe. And I found one here in the USA at etrailer.com. So we do not have to convert our hitch in Europe. Good and solid product.
Nicely made and elegant looking. But will not fit a receiver where the center of the hitch pin hole is more than 2-5/16" from the end of the receiver. The straight portion of the ball mount starts to fatten out to more than 1-1/4" wide at that point which means it won't work for some longer receivers like my OEM VW one. Not a product fault, but something to measure before ordering one.
# 10
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
for a little more money, get this one !!!
Very easy to install on our 2014 VW Tiguan!
# 11
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 6-3/4" Long - 3,500 lbs
for a little more money, get this one !!!
Very easy to install on our 2014 VW Tiguan!
# 12
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Rugged, works great, such easy install
Fit perfectly, great product. High quality.
# 13
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 14
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 15
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 4-5/8" Rise - 3,500 lbs
I was looking for the euro-style drawbar for our 2017 VW Tiguan, because we are going to have it shipped back to Europe. And I found one here in the USA at etrailer.com. So we do not have to convert our hitch in Europe. Good and solid product.
Nicely made and elegant looking. But will not fit a receiver where the center of the hitch pin hole is more than 2-5/16" from the end of the receiver. The straight portion of the ball mount starts to fatten out to more than 1-1/4" wide at that point which means it won't work for some longer receivers like my OEM VW one. Not a product fault, but something to measure before ordering one.
# 16
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 17
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 18
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 3-1/8" Rise - 3,500 lbs
I was looking for the euro-style drawbar for our 2017 VW Tiguan, because we are going to have it shipped back to Europe. And I found one here in the USA at etrailer.com. So we do not have to convert our hitch in Europe. Good and solid product.
Nicely made and elegant looking. But will not fit a receiver where the center of the hitch pin hole is more than 2-5/16" from the end of the receiver. The straight portion of the ball mount starts to fatten out to more than 1-1/4" wide at that point which means it won't work for some longer receivers like my OEM VW one. Not a product fault, but something to measure before ordering one.
# 19
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 2-3/4" Rise - 3,500 lbs
I was looking for the euro-style drawbar for our 2017 VW Tiguan, because we are going to have it shipped back to Europe. And I found one here in the USA at etrailer.com. So we do not have to convert our hitch in Europe. Good and solid product.
Nicely made and elegant looking. But will not fit a receiver where the center of the hitch pin hole is more than 2-5/16" from the end of the receiver. The straight portion of the ball mount starts to fatten out to more than 1-1/4" wide at that point which means it won't work for some longer receivers like my OEM VW one. Not a product fault, but something to measure before ordering one.
# 20
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
I was looking for the euro-style drawbar for our 2017 VW Tiguan, because we are going to have it shipped back to Europe. And I found one here in the USA at etrailer.com. So we do not have to convert our hitch in Europe. Good and solid product.
Nicely made and elegant looking. But will not fit a receiver where the center of the hitch pin hole is more than 2-5/16" from the end of the receiver. The straight portion of the ball mount starts to fatten out to more than 1-1/4" wide at that point which means it won't work for some longer receivers like my OEM VW one. Not a product fault, but something to measure before ordering one.
What our customers are saying:
"These arrived yesterday and are EXACTLY what I was looking for. Thanks for the excellent service!"