Summer Starts Here - Save up to 70%
# 1
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2
Installed easily and they function as designed as well. They look cleaner than the factory stabilizers as well. I also like that they use a 3/4" socket to go adjust and not a special tool like other brands.
Definitely a heavier duty version of our campers stock stabilizers. They bolted right up to the brackets and glad we have new stabilizers. I hope the paint lasts on these as that seems to be an issue with the other, cheaper stabilizers. Time will tell.
# 2
Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1
Gave it a three due to the modifications that had to be done to make it fit. I had to grind down the outside of the pad about 3/16" to make the stabilizer fit up into the bumper of our Scamp. In addition, I shimmed the top down about 5/32 so it would lock into place without forcing it. One stabilizer had epoxy which looks very sloppy. This on the edge where it should be spot welded - hope this is the case! Fortunately, I'd read reviews indicating that this was not a direct replacement for Scamp 13'ers. Folks should be aware they may have to do some work since the stabilizers may not fit out of the box. Once modified, they work as expected.
I drilled two 3/8" holes in the top of the rail and used two stainless bolts to hold it on. Works very well for this application. It folds and holds the trailer for loading, and if I have to leave it somewhere, and don't want the tongue sitting on the ground. I used it on a Harbor Freight 4x4 trailer I am building to pull with my Can-Am Spyder. Love it!!!
# 3
Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 2
Easy to install both in under an hour. Provide good stability to small (boat) trailer when deployed. I can see the paint/powder will be as durable as they were as simple to install
Bought these for my cargo trailer. Did not get around to installing them for several months. When I finally unpacked them, the “foot” of one came off while I was unwrapping them. I had to drill holes and add a few screws to reattach. There was no damage to the box. They still serve their purpose, just disappointing.
# 4
Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White
Received the jack in record time. Easy to switch out the old jack and install new one. Works like I hoped it would. Very happy. Thanks
Great jack, great company to do business with, easy to install, great price, will definitely buy from them again
# 5
Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 3,500 lbs - Black
Great jack. Just what I needed to allow my tailgate to open while hooked up to my travel trailer
Excellent Jack. Slow moving but that is due to high torque. Well made, attractive design. Highly recommended! Solved the problem of busting my knuckles on the propane tanks while cranking the old jack.
# 6
Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1
Excellent product and service. I love all the videos and you give exact measurements on a lot of your products. Never had a problem with Etrailer.
They went on a custom made trailer build that’s not yet in service. Seem to function as advertised.
# 7
Fulton Drop-Leg Stabilizer Jack with Mounting Channel - Weld-On - 28" Leg - 13" Bracket -
Beautifully made and a solid drop leg. Do I need to say more? You get what you pay for.
Product was exactly what I was looking for. Only issue is the one square latch pin is missing.
# 8
Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2
These jacks are solid and easy to install. Do not come with mounting hardware. I used 5/16” x 1.5” bolts with washers and lock nuts. Also added some locktite to be sure they don’t come loose. Standard attachment on most trailers seem to include one or two bolts, then the rest with self tapping screws, which isn’t very secure in my opinion. I had to drill out some of the smaller holes to fit the 5/16” bolts but an easy job for a DIY project. Thanks etrailer for selling a great product and quick delivery.
Products and people are great I’ve ordered hitches axles and or it rams ships fast and never an issue thanks
# 9
Ultra-Fab Ultra Scissor Jacks - 30" Lift - 13,000 lbs - Qty 2
Installed easily and they function as designed as well. They look cleaner than the factory stabilizers as well. I also like that they use a 3/4" socket to go adjust and not a special tool like other brands.
Didn’t last 3 months the end came off and screw mess up where the jack don’t work anymore
# 10
Lippert Scissor Stabilizer Jacks w/ Handle - 24" Lift - 10,000 lbs - Qty 2
I upgraded my '98 sportsmen from tripod stands to these scissor jacks.Setting up is so much easier now. The jacks are very sturdy, fairly priced and were easy to install.
Great jacks for a big travel trailer
# 11
Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2
Deception in advertisin It may be my fault for not reading to total description in detail rather than glancing over it. Similar products from other companies list the weight capacity as each but this product lists the 10,000 pound weight capacity as both. They are only good for 5000 each. The [online] option was at least 6000 pounds! The only reason they were not returned is the 30in capability.
These worked out great easy to install with the circular mounting plate.
# 12
Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4
These Jack's made both building and positioning my teardrop onto the trailer bed easier. At campsites they easily level the trailer. So yes I'm happy.
we are using these stabilizers for supporting our offloaded truck camper (adventurer 910db) where we reside full-time ... they are very easy to use, provide excellent support for the truck camper and have eliminated 98% of wobble ... the support structure includes jack pads, e-trailer stabilizer, 2x6 pressure treated lumber, 4x8 3/4 inch pressure treated plywood
# 13
Ultra-Fab Slide-Out Supports for Motor Homes - 21" to 37" - Qty 2
The Product appears to be what I need to add extra support to my toy haulers doors. Not impressed with the shipping company, it was a miracle that the 2 items stayed inside of the box. The attached picture shows you how they arrived today.
I recently purchased a 1/5 wheel travel trailer with 5 slides. It was recommended that I should put slide supports under the bigger slides. After researching, I decided the Ultra-Fabs would do the job. I received them on Thursday and installed 2 sets that afternoon. I followed the guidelines and set them in less than 30 minutes. Friday afternoon I installed the rest. I know they did a good job because my wife's first comment was "the trailer doesn't bounce when you walk across the floor". That was the best test. She didn't know what I was doing under the trailer. They were easy to install, 1 plastic leveling block, the support, and a short level. Set the block under the slid rail at the outermost end, hold the support on it and pull the top up until it touches the rail. Holding the top against the rail with the ears on the sides of the rail. With 1 hand, push the white button and slide the lock ring down against the bottom housing and release the button. Plumb the bottom housing with the level. Give the lock ring 1 good turn after it is snug and you are finished.
# 14
Ultra-Fab Ultra Scissor Jack - 24" Lift - 6,500 lbs
Installed easily and they function as designed as well. They look cleaner than the factory stabilizers as well. I also like that they use a 3/4" socket to go adjust and not a special tool like other brands.
Replacement jack fit and worked perfectly Fast delivery
# 15
Leveling Scissor Jack - 24" Lift - 5,000 lbs
Much better jack than the one that came with the tow trailer. This 70 year old woman had no difficulties installing it. One year later still works great!
leveling jack was delivered very promptly and in good shape. installed on my 5th wheel easily and works fine. a bit lighter duty than the OEM jack but darn good value for the price and will get the job done. etrailer is the best!
# 16
Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs
The alternate power setup makes its slow rate of rise necessary which would be good if my lithium batteries went low. To avoid battery problems be sure to add an inline battery disconnect from the trailer power when using tow vehicle power. I simple added an inline fuse that could be removed should I need to use the tow vehicle power.
I was amazed at how quickly my replacement from etrailer arrived. I was a bit worried that the installation of my new jack would be more difficult that I expected. The reverse proved to be the case, it was very simple to place the trailer tongue on jack stands, remove the old jack and install the new one. As the old saying goes "even a cave man could do it."
# 17
Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000 lbs
One small part was missing from my Ground Control TT. Carol Korren expedited delivery of the missing part and the UPS truck pulled up at the moment I needed the part. Fantastic customer service!
We love our one touch jack system. We used in on a 3 month camping trip out west setting up probably 40 plus times and we continue to use our camper and the jacks work great!
# 18
JT's Strong Arm Jack Stabilizer Kit for Travel Trailers
Took the sway out 95%. Excellent customer service! Quality product.
We have motorized stabilizer jacks on our 33'camper. The JT Strongarm jacks did not provide the extra stability we were hoping for. There is still a lot of motion when anyone in the camper moves.
# 19
Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2
I mounted this Stabilizers Jacks to the back of a 4x8 utility trailer. I use the trailer to haul my Honda ATV to MotoAmerica motorcycle races. Once the ATV is removed I lower the jacks and mount my tent inside the trailer. These stabilizers allow me to safely move around in the tent without fear of the trailer tipping.
Jacks worked great. Added them to an aluminum 2 place enclosed snowmobile trailer that did NOT like humans to walk up the rear ramp when unhooked and empty!? ...problem solved.
# 20
Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors - 30" Lift - 6,000 lbs
Finally got around to installing my PT II Stabilizers 30" front and rear of our 26' Surveyor. Pre - assembled them to make sure they went together ok. Luckily I had two sources for power front & rear which made wiring easy, I used a Buss block to make all positive connections, grounds straight to frame, soldered all connections and heat srinked to seal. Using the 3/8" self tappers was fun.Well got it all together and all works well makes trailer very stable, don't have to worry about scissor jacks collapsing anymore.
It looks like a great product am anxious to install them. I have a symbol of them in my garage and I have one with a really crooked foot. The bolt hole on the retracting arm was drilled in the wrong place so it is totally crooked, not a deal breaker though. I’m sure the are more than Adequate
What our customers are saying:
"very easy to shop"