bing tracking image

Most Popular Roof Rack for 2016 Acura MDX

change vehicle


Ski and Snowboard Racks Videos

Yakima JetStream Crossbars Installation - 2016 Acura MDX

Speaker 1: Today in our 2016 Acura MDX, we'll be taking a look at and showing you how to install the Yakima roof rack system. This is going to consist of part numbers Y00426, those are going to be our Yakima JetStream crossbars, part number Y00146, those are our BaseLine towers, and part numbers Y06150, and Y06105. Those will be our BaseClip fit kits for our Acura MDX.The Yakima roof rack system is a great solution for carrying your vehicle accessories on your vehicle's naked roof, whether those are bike racks, cargo baskets, or ski and snowboard carriers. The Yakima JetStream crossbars are an aerodynamic crossbar that's going to help to reduce wind noise and drag.If we remove our end cap, you'll see our weather strip on the inside. This can easily be pushed down and used with channel-mounted accessories. So you don't have to worry about taking our weather strip out, or cutting it down.



Yakima Roof Rack Review - 2016 Acura MDX

Speaker 1: Today on our 2016 Acura MDX we're gonna be test fitting the Yakima CoreBar Roof Rack System. These are the Yakima crossbars, 60" long; these are the baseline towers; and this is the clip fit kit for the Acura MDX.The Yakima CoreBar Roof Rack System is great for carrying a wide variety of accessories on your roof, or freeing up space inside your vehicle. It can carry bike racks, cargo baskets, cargo boxes, as well as ski and snowboard carriers, and kayak carriers. The two bars have a combined carrying capacity of 220 pounds, although you always have to double check with your vehicle's manual to make sure your roof can withstand that weight. And at our end caps here we have these knockouts, which you can replace with the Yakima Same Key System, so both your accessories and your roof rack can be keyed alike and secured to your vehicle.Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We already have our front bar installed on our vehicle, and we have our rear bar partially assembled.



Inno Aero Crossbars Installation - 2016 Acura MDX

Speaker 1: Today on our 2016 Acura MDX we'll be taking a look at and showing you how to install the Inno Roof Rack System. This is going to consist of the Inno Aero Crossbars measuring 60 inches long, with part number INXB153-2, the Inno Through Feet for Aero cross bars, part number INXS250 and the custom fit kit for our MDX, part number INK656.The Inno roof rack system, like most others, allows you to carry bike racks, kayak carriers and cargo baskets on your roof, and still have that aerodynamic shape that helps to reduce wind noise and drag. The Inno bars are also going to have the weather strip like most other cross bars. The only difference is that this one will push down and work with your channel mounted accessories, where others you actually have to remove that weather strip and cut it down. This is going to be easy to install. It's going to clamp around our door frame and lock into place.



Rhino Rack Roof Rack Review - 2016 Acura MDX

Today on our 2016 Acura MDX we'll be doing a test fit of the Rhino-Rack Vortex Aero Crossbar System, using part numbers RRVA137B-2 for the 54" Black Aluminum Crossbars, and then part number RRRLKVA for the 2500 Series Leg Kits, and then part number DK400 for the clamps and the pads. We've already got the front one installed as you can see here. We followed our instructions, we came from the door jam over to the center, we measured out the distance and how far we're supposed to be for our legs underneath the bars, and then we tightened everything up, and we got it. So let's go ahead and do the rear one together. First thing we'll do is we'll grab the leg first, and then our pad. We want to make sure that the arrow is pointing out, so away, and then we're going to push that on the bottom. Make sure that it seats all the way around.



Yakima Roof Rack Review - 2016 Acura MDX

Today on our 2016 Acura MDX, we're going to be doing a test fit of the Yakima roof rack system. It's going to be part number Y00409, Y00124, and finally part number Y00731. As you can see, we've already got the first one up on the vehicle. That's going to be spaced off that front windshield 6" with an inside measurement from each Q Tower of 48". We'll explain how the second one goes together and the final measurements you need to make. The bar here is going to be your part number Y00409. You're going to have your Q Towers, which are going to be part number Y00124; and then finally, your fit kit for the vehicle specific, which is going to be part number Y00731. As you can see, we've already got one side on.





2016 Acura MDX Ski and Snowboard Racks Questions