# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
Very impressed with company keeping constant updates. Product was shipped very quickly. Heavy duty and extremely easy to install, granted I had a friend help and access to a lift. I will definitely be recommending etrailer to my friends.
# 2
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
Ball mount arrived with clean welds and smooth powder coat finish that matched the trailer hitch receiver. Mount fits snug in the receiver and provides excellent, printed weight limits to assure safe use. Will be used for utility trailer and possibly a small tent trailer suitable for the weight and pulling power for my Subaru Forester.
I run a small camper dealership, Road Trip Camping, that specializes in small, compact, and lightweight little campers that can be towed by one's existing vehicle. I have been using etrailer.com for over a year now and am very happy with their service. Not only do they typically have anything I ever need, but they are very informed about their products and how to install them. Just a quick call to them, and I get all the answers I need. They are extremely good about product knowledge and customer service. I highly recommend them to anyone looking for trailer products and accessories.
# 3
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Great product, have it on our 2014 Forester, using it as a bumper guard-for those people that pull in too close in parking lots and get against your car. I have the rise UP and then mounted two LED lights to the rise, connected to trailer light socket for extra turn signal lights and brake lights. Really shows up great.
Ball mount arrived with clean welds and smooth powder coat finish that matched the trailer hitch receiver. Mount fits snug in the receiver and provides excellent, printed weight limits to assure safe use. Will be used for utility trailer and possibly a small tent trailer suitable for the weight and pulling power for my Subaru Forester.
# 4
Curt Class II Drawbar - 3/8" Rise, 1" Drop - 7-13/16" Long - 3,500 lbs
Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install. Thanks again etailer!
Great service, very prompt, with good customer contact and follow-up.
# 5
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
It looks tiny compared to other hitches, but is solid metal. The welds are fine and fits like it should. A necessary item for the trailer hitch.
Everything fit perfectly on my 2000 Subaru Forester and is still working a year after installation. I use the trailer every week.
# 6
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install. Thanks again etailer!
I purchased a Curt class II hitch for my wifes subaru. I recieved it right away and the installation was a breeze. There was a simple little piece of two sided tape missing from the light wire kit. I called etrailer and George sent it to me that day. Service after the sale is what makes a good company great. I couldn't be happier. Thanks alot etrailer!
# 7
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
Every Item I have ordered from etrailer.com has been top of the line . Easy ordering , prompt service , and excellent installment instructions . I watch the video , more than once , and follow the expert's direction . I wouldnt order trailer parts anywhere else . Thank You
I believe my choice, with the help of etrailer, of this Draw-Tite trailer hitch receiver, along with a few other items to go with it, such as the drawbar, hitch ball and wiring harness, was a good one for my 2017 Subaru Forester. I also have to compliment etrailer for their excellent video on how to install it. All together, it really made the purchase very easy and smooth. Thanks etrailer.
# 8
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install. Thanks again etailer!
This got installed on my wife's Forester and we have used it several times for pulling a utility trailer and also for pulling our dock and raft at our camp. Very happy with the options it offers for moving more than fits in the car. Since the Forester had the dual exhaust, i did cheat and have my mechanic do the install. He did it within the hour that is advertised, but did say it would have been a bit of a challenge working at ground level. I think I still ended up paying less in total than going to a hitch installer overall, very happy with the hitch, wiring harness, and drawbar. It's especially nice to have the harness tucked away, as it doesn't get used that often.
# 9
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
Needed to pull a 5x8 trailer with a 22 forester. This ball mount had the perfect rise to brink the hitch ball to 18 & 3/4” at the center of the ball.
# 10
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
GREAT PRODUCT, FITS MY CAR PERFECT.
Got what I ordered !!
# 11
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
Everything was fine, but I wish it were easier to flip it over to get a rise instead of a drop.
# 12
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install. Thanks again etailer!
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
# 13
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
This drawbar was clearly used. See the picture. I asked etrailer about it and sent this picture but the person that replied, Noah, thought it must have been bumped around in shipping. If shipping caused this much damage, it's a poor quality product. If it was, in fact, used, then etrailer lied to me. Either way...not good.
Perfect hitch for my 2015 Subaru Forester. Put the ball in the right place!
# 14
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.
# 15
Curt Class II Euro Style Drawbar with 2" Ball - 2-3/4" Rise - 3,500 lbs
I like that this design keeps trailers level rather than pitched forward for my 2007 Subaru Forester. Seems incredibly strong because of its weight and being one piece.
This hitch has worked perfectly on my Subaru for over a year now. Last summer I pulled my tear drop trailer around the country with no problems and the finish on the hitch still looks like new. I would recommend this hitch to a friend.
# 16
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install. Thanks again etailer!
Item shipped fast and exactly as described. No hesitation in ordering again from this company. Thanks.
# 17
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Needed something to raise the hitch carrier on our subaru forester to clear the tailpipes. This was the ticket. Super fast shipping from etrailer and curt makes a sturdy, well finished product.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 18
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
This hitch has worked perfectly on my Subaru for over a year now. Last summer I pulled my tear drop trailer around the country with no problems and the finish on the hitch still looks like new. I would recommend this hitch to a friend.
I like that this design keeps trailers level rather than pitched forward for my 2007 Subaru Forester. Seems incredibly strong because of its weight and being one piece.
# 19
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.
This drawbar was clearly used. See the picture. I asked etrailer about it and sent this picture but the person that replied, Noah, thought it must have been bumped around in shipping. If shipping caused this much damage, it's a poor quality product. If it was, in fact, used, then etrailer lied to me. Either way...not good.
# 20
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
What our customers are saying:
"very easy to shop"