# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
Very impressed with company keeping constant updates. Product was shipped very quickly. Heavy duty and extremely easy to install, granted I had a friend help and access to a lift. I will definitely be recommending etrailer to my friends.
# 2
Curt Class II Drawbar - 3/8" Rise, 1" Drop - 7-13/16" Long - 3,500 lbs
Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install. Thanks again etailer!
The hitch works great and it was delivered FAST. I was very happy with the purchase. It was cake to install.
# 3
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
It looks tiny compared to other hitches, but is solid metal. The welds are fine and fits like it should. A necessary item for the trailer hitch.
Everything fit perfectly on my 2000 Subaru Forester and is still working a year after installation. I use the trailer every week.
# 4
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install. Thanks again etailer!
I purchased a Curt class II hitch for my wifes subaru. I recieved it right away and the installation was a breeze. There was a simple little piece of two sided tape missing from the light wire kit. I called etrailer and George sent it to me that day. Service after the sale is what makes a good company great. I couldn't be happier. Thanks alot etrailer!
# 5
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
Every Item I have ordered from etrailer.com has been top of the line . Easy ordering , prompt service , and excellent installment instructions . I watch the video , more than once , and follow the expert's direction . I wouldnt order trailer parts anywhere else . Thank You
I believe my choice, with the help of etrailer, of this Draw-Tite trailer hitch receiver, along with a few other items to go with it, such as the drawbar, hitch ball and wiring harness, was a good one for my 2017 Subaru Forester. I also have to compliment etrailer for their excellent video on how to install it. All together, it really made the purchase very easy and smooth. Thanks etrailer.
# 6
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 7
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Great product, have it on our 2014 Forester, using it as a bumper guard-for those people that pull in too close in parking lots and get against your car. I have the rise UP and then mounted two LED lights to the rise, connected to trailer light socket for extra turn signal lights and brake lights. Really shows up great.
Ball mount arrived with clean welds and smooth powder coat finish that matched the trailer hitch receiver. Mount fits snug in the receiver and provides excellent, printed weight limits to assure safe use. Will be used for utility trailer and possibly a small tent trailer suitable for the weight and pulling power for my Subaru Forester.
# 8
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 6-3/4" Long - 3,500 lbs
Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install. Thanks again etailer!
# 9
Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 6-3/4" Long - 2,000 lbs
Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install. Thanks again etailer!
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
# 10
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
i bout this product for my 2010 subaru forester to tow a 16" boat. It works much better than expected! The amount of cushion it provides is stellar! quite the amazing device! i will have one on every trailer that i buy.
Solid build and well designed mechanism for anti vibration!
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"