# 1
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 2
Titan Ball Mount for 2-1/2" Receivers, 3-1/2" Rise, 5" Drop, 16-1/2" Long - 13K
The hitch is not as long as it seems in the picture. When installed it extends about 8” from the face of receiver to center of ball. I was hoping for something that was about 10-12” away from receiver. The pin hole is 4.5” from rear. Quality and finish are excellent, the drop is built with 1” plate and the ball hole is 1 1/4”.
I am pleased with my purchase and Teresa at etrailer. I purchased the wrong hitch and had to reorder. I did not allow enough drop and it was my fault. I will keep the other one for different applications. Submitting photos of both.
# 3
Buyers Products Ball Mount w/ 2" Ball - 3/4" Rise, 2" Drop - 8-1/2" Long - 5K
The hitch was delivered as ordered. The 2" ball was torqued on and it is a perfect fit to the receiver. Solid and high quality. etrailer.com has continued to be a great online retailer for me.
Paul/ you were a great help. Told me everything I needed to know. It works fine each time I use it. Thank you, Scott
# 4
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Awesome product. Awesome service. Quick delivery. Couldn't be better!
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
# 5
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
The products (trailer hitch, ball mount kit, and electrical harness) all arrived as advertised! Excellent website and easy to use.
Perfect for me - I have a heavy boat trailer and a light-duty utility to move around. Just what I needed.
# 6
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 7
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 8
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Awesome product. Awesome service. Quick delivery. Couldn't be better!
Works great. Needed the drop to tow a utility trailer at level.
# 9
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs
Ordered online the package arrived early. Installation for the hitch was simple if you are familliar with typical auto work. Pnumatic tools reccomended. Plug - n- Harness.----well it works....I had to dissasemble the whole rear cargo area of the Xterra to get to the connectors. The instructions from the manufacturer are terrible. Definately needs a picture with each step. This should not be attempted by a novice.
Very good Quality with a good finish
# 10
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 11
Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs
Awesome product. Awesome service. Quick delivery. Couldn't be better!
All of the items arrived on time and not damaged in any way. Excellent quality products.
# 12
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 13
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Awesome product. Awesome service. Quick delivery. Couldn't be better!
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
# 14
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 15
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
Excellent customer service & support! Bought for my 2013 Honda Fit and plan to trailer my Yamaha Tenere motorcycle around North America! Very happy with hitch.
Typical quality of...VERY good!! Lol. I've pulled my small mc trailer numerous times with this hitch and NO issues!!!
# 16
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 17
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 18
Draw-Tite Ball Mount - 3/4" Rise, 2" Drop - 10-1/2" Long - 6,000 lbs
Ordered online the package arrived early. Installation for the hitch was simple if you are familliar with typical auto work. Pnumatic tools reccomended. Plug - n- Harness.----well it works....I had to dissasemble the whole rear cargo area of the Xterra to get to the connectors. The instructions from the manufacturer are terrible. Definately needs a picture with each step. This should not be attempted by a novice.
Very good Quality with a good finish
# 19
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
Exactly what I needed. The recommendations for ball height, between my Coleman camper and my Nissan XTerra were right on. Fits perfectly in the receiver on my vehicle.No issues at all.
solid, heavy, well-made
# 20
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop -14,000 lbs
Awesome product. Awesome service. Quick delivery. Couldn't be better!
Very useful for adding tie down points. Only reason for not giving 5 stars was the need to cut off the extra length and drill new holes farther up for the pins so the units fit better.
What our customers are saying:
"You folks are fast. Thank you very much."