# 1
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
Installed my 2” hitch but don’t have a 2” bike trailer yet. I purchased this to continue to use my 1.25” bike trailer (until I find a deal). Used this over Thanksgiving weekend on I35 in Texas (tons of traffic)and I’m very pleased with the performance. I’m was secure and bikes traveled just fine.
I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.
# 2
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
Solid, well built. Fits perfectly in to the receiver.
Looks great will post pictures when I get it installed
# 3
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
Very heavy duty. Will use it with a bike rack I had for another vehicle that had a 2" receiver.
Solidly made. Wish all of these would come with optional locking pins and clamps to minimize movement as I use mine primarily for a bike rack with very nice bikes aboard.
# 4
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
Fantastic Product. Saved me from having to buy a brand new bike holder for my new car with a different hitch size.
Professional, delivered a day early. As promised. What more can you want.
# 5
Hitch Extender For 2" Trailer Hitch Receiver 7"
It was what I needed
Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.
# 6
Malone 2" Dual Purpose Hitch Receiver
Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.
I bought this Dual Purpose Receiver at Twice the price of that Big online company because of reviews from owners that bought on both sites. After evaluating the reviews, I chose to go with etrailer because I have come to trust them as a company that gives you a great product that they will stand behind and they appreciate your business. I haven’t used this receiver yet, but can look at it and I am comfortable that I made the right choice. I will follow up with another review after I use it.
# 7
Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long
etrailer is an awesome website. Clear information on products, great videos and links on installation, and extremely helpful support from knowledgeable, live people. Thanks!
I was surprised by just how solid and heavy it was made. Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged. The hitch sits under the bed and this extends it out so it is useable.
# 8
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.
Great product from an even greater company. ETRAILER has the knowledge and products to solve most any trailering problem.
# 9
Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
Beefy. I have no doubts of the capacity of either side of this hitch adapter, there's plenty of weld to hold it all together. Very few options will provide minimal drop (for an off-road trailer) and minimal rise on the other side for an additional bike rack or cargo carrier. Jeeps are tough since you need to be able to open the gate. This one clears no problem. My spare is up on a slant back carrier, but I think the stock spare should clear as well. Get you a "Trimax THC200 Universal Anti-Rattle Clamp Fits 2" Hitch" and this thing is solid as stone.
The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.
# 10
Advantage SportsRack Hitch Extender for 2" Trailer Hitches - 11" Long
The "Hitch Extender" that I ordered works great. Everytime I go RVing in my Winnebago MH I utilize it. Jerry Barnes
The product arrived much faster than I expected. It seems to be well made and substantial and should do what I need. I need it to extend my Swagman rack further away from my car's bumper so I don't have to remove the peddle on my inside bike.
# 11
Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
Who do I contact about getting the right extension bar? The one I ordered Is a 2 1/2 inch which I need a 2 inch to slide into my receiver or if you guys have a 10 to 12 inch, 2 inch extension so I can connect it I sent a photo of the end that is 2 1/2 which I need it to be 2 inches to slide into my receiver
Received the product on time and as described however two days later I found it on Amazon for $167 vs the $XXX I paid from etrailer. When I called to see about a price adjustment - they couldn’t assist and offered return and re-purchase from Amazon - minus a $XX return shipping. Lesson learned.
# 12
Curt Extender for 2" Hitch Receivers -18" Long
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
First off, I love Curt products. When I found this item at Etrailer at this low price I was shocked. I was prepared to receive a knock off. I tried my luck and was amazed the product not only showed up at my doorstep the next day but is a very high quality Curt product. My handyman was working on the house and he couldn’t believe the quality at that price. Thanks Etrailer! You are my new go to for my traveling needs.
# 13
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Perfect for my application.
Everything was delivered fast and in perfect condition.
# 14
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
Exactly what I needed. Now able to add storage box and still pull tow Dolly.
Etrailer’s customer is actually customer service. There’s real people who are there to help. Kate helped me get my order the next day after I realized I accidentally switched the billing and shipping addresses on the order form.
# 15
CR Brophy Hitch Extender for 1-1/4" Hitch Receivers - 5-3/4" Long
I am very pleased with this company.
Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.
# 16
Curt Hitch Extender for 2" Trailer Hitches - 14" Long
The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.
This extender does a pretty good job of keeping my bike away from the rear radar system in my Venza so the backup warning system does not engage in error. Beware it’s pretty heavy.
# 17
Thank you for the 1 5/8ths - 2 inch adapter. This product is not easy to find. Shipping was fast, and fits great. Fantastic follow-up all the way from shipping to receiving. Will be shopping with you again.
Good quality, fast delivery
# 18
Hitch Extender For 2" Trailer Hitch Receiver 14" Long
It works great,by moving the trailer back from the vehicle you can load longer items,so there are not hanging over the back of the trailer. It also helps in the backing of the trailer. Thank You
I would like to have the actual distance from the weld joint to the hitch pin hole of 4 1/2". This unit is slightly less than that.
# 19
Curt Hitch Extender for 1-1/4" Trailer Hitch Receivers - 7" Long
Perfect fit to extend the hitch to allow my bike rack to clear the back bumper. Great quality as well.
This hitch extension was exactly what I needed. New hitch on the Toyota Avalon has the receiver box a little too far under the bumper to fit my bike carrier. The diagonal support on the carrier didn't allow hitch pins to align without modifying (cutting) bumper. This extension was a simple yet effective solution to moving the carrier away from rear of vehicle. (Photos were taken without hitch pin in place) The item was in stock and shipped rapidly. Thank you etrailer.
# 20
Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long
The fact that it's steel is a plus, and it extends the hitch so that the bike rack that's attached now is far enough away from the hatch to not bang against it. Great product!
Ordered for our Kuat rear mount bike rack, as our SUV had a larger hitch receiver. Well built, clean machining and a perfect fit. Fast shipping and exactly as advertised. Great communication surrounding the order. Couldn't recommend more.
Surco Products Hitch Cargo Carrier Review - 2013 Honda Odyssey
Today in this 2013 Honda Odyssey we're going to be test fitting the 20x48 Surco cargo carrier for 1-1/4 inch hitches, Part Number 52017. If you take a look here, we actually have a nice open mesh flooring here, which is going to make it a lot easier to clean, once you remove what it is you've been hauling. It also has these bars here, all the way around the cargo carrier, which will provide nice tie down points to secure your cargo while you're driving. The exhaust is actually on the passenger side and faces down, so you're not going to have to worry about any heat-sensitive materials while you are driving. So now I'm going to go ahead and give you some measurements. It will give you a better idea of how much distance has been added to the vehicle, once you install this cargo carrier. I'm going to go ahead and measure from the bumper. So to this point here, that's going to be about 23-3/4 inches. For ground clearance, it's going to be about 12 inches. And for the closest point to the bumper, which is going to be right about here, it's going to be about 2 inches. Now, of course, with nothing in the cargo carrier we have complete access to the rear hatch of our vehicle to get anything that we need.
Rola 21x55 Hitch Cargo Carrier Review - 2013 Honda Odyssey
Today in this 2013 Honda Odyssey we're going to be test fitting the 21 by 55 Rola Cargo Carrier for inch and a quarter hitches. Part number 59507. First off I'd like to point out it has this open grate bottom here which makes it a lot easier to clean once you take off what you've been carrying. Plus, all around the carrier there are nice points here to put down hooks, straps, whatever you need to hold down your cargo. Next I'm going to go ahead and give you some measurements. The first is going to be the total distance added to the vehicle once the cargo carrier is installed. That's going to be this point here and that's going to be about 28 inches. Next I'll go ahead and do the ground clearance down here at the end.
Hollywood Racks Hitch Cargo Carrier Review - 2013 Honda Odyssey
Today on our 2013 Honda Odyssey, we are going to do a test fit on the Hollywood Racks add on cargo carrier design for use with the sport rider or sport rider SE2 bike rack but as you can see here, it's also available for use as a stand alone carrier. It measures 15 1/2 inches x 55. It's going to offer us at 220 pound weight capacity when used independently. A 90 pound weight capacity when used in conjunction with the bike rack. Part number on it is HR1485. To begin our test we need to slide the shank of the carrier right into the receiver tube of our hitch. We'll then line up our pin hole with our hitch pin hole.
Pro Series Hitch Cargo Carrier Review - 2013 Honda Odyssey
Today on our 2013 Honda Odyssey we're going to to a test fit on the Pro Series Solo. This is a 31 by 47 cargo carrier that's been designed for use with 2-inch hitches. It offers a 400 pound weight capacity. Part number on it is PS1040100. Now this would be one of the larger cargo carriers that we offer. As you can see, a lot of surface area on it. With that being said, it can be for one person a little be cumbersome, so if you've got a helpful hand there available, I'd recommend that.
Rola Dart Hitch Cargo Carrier Review - 2013 Honda Odyssey
Today on our 2013 Honda Odyssey we're going to do a test fit on the 23 by 56 Rola Dart. This is a folding cargo carrier. They've designed it for use in 2" hitches. It offers a 450 pound weight capacity. Part number on it is 59550. To begin our test fit we slide the shank of the Dart right into the receiver tube of our hitch. We need to slide this in far enough so that our threaded hole lines up with our hitch pinhole.
MaxxTow Hitch Cargo Carrier Review - 2013 Honda Odyssey
Today on our 2013 Honda Odyssey, we are going to do a test fit on the 20x47 Maxxtow Cargo Carrier. With the exemption of the full length steel shank, we get a nice aluminum construction which really saves weight. Still offers a 500 pound weight capacity and it's designed for use in two inch hitches. The part number on it MT70108. As we said the aluminum construction is really causes this to be a nice lightweight carrier, it might be a good choice if weight is going to be an issue for you. To do the test fit we'll just slide the shank of the carrier into the receiver tube of our hitch and we'll line up our pin hole with our hitch pin hole. Once we have those in line we are going to take a standard five eights pin, slide it through and secure it on the other side with the clip.
MaxxTow Hitch Cargo Carrier Review - 2013 Honda Odyssey MT70107
Today on our 2013 Honda Odyssey, we are going to be doing a test fit on the Maxxtow Compact Cargo Carrier. This measure 17x50. They've designed it for use with two inch hitches. It still going to offer us a 500 pound weight capacity. Part number is MT70107. To begin our test fit we need to slide the shank of the rack into the receiver tube of our hitch. As we do this we'll line up our pin hole with out hitch pin hole.
Detail K2 20x60 Hitch Cargo Carrier Review - 2013 Honda Odyssey
Today on our 2013 Honda Odyssey we're going to do a test fit on the Detail K2 folding cargo carrier. Now this measures 20" by 60". It's been designed for use in 2" hitches and it offers a 500 pound weight capacity. Part number on it is K2HCC602. To begin our test fit we need to slide the shank of the carrier into the receiver tube of our hitch. We'll then line up our pinhole with our hitch pinhole. With that in line we'll take our standard 5/8 pin, we'll slide it through and secure it on the other side with a clip.
Curt 24x60 Hitch Cargo Carrier Review - 2013 Honda Odyssey
Today on our 2013 Honda Odyssey, were going to be doing a test fit on the Curt 24x60 folding cargo carrier. They've designed this for use with 2-inch hitches. It offers a 500-pound weight capacity. The part number on it is C18153. To begin our test fit, we're just going to slide the shank of our carrier into the receiver tube of our hitch. We then need to line up our pinhole with our hitch pinhole.
Curt Hitch Cargo Carrier Review - 2013 Honda Odyssey
Today on our 2013 Honda Odyssey well be test fitting the Curt 20 x 48 cargo carrier, part number C18145. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our threaded pin holes, thread our anti-rattle bolt through the threaded pin hold and tighten with a wrench. Now lets go over some clearance measurements to see how the cargo carrier and this vehicle fit together. Theres about nine inches of ground clearance from the rear of the carrier. The closest part of the vehicle to the closest part of the carrier is about a half an inch. The closest part of the carrier to the closest part of the vehicles exhaust tip is about 11 inches.
Surco Hitch Cargo Carrier Review - 2013 Honda Odyssey
Today on our 2013 Honda Odyssey well be test fitting the 24 x 60 cargo carrier for two inch hitches from Surco, part number 52018. To begin well simply slide our cargo carrier shank into the hitch, line up the hitch pin hole and install our hitch pin. Well then put the clip on the other side of the pin which will secure our cargo carrier to the vehicle. Well now go ahead and give you a few measurements. From the closest point of the carrier to the back of the vehicle is a half inch, and the cargo carrier will add an additional 26 inches of overall length to the vehicle. The ground clearance at the back of the carrier is 10 inches, and the exhaust on this vehicle does exit the passengers side here at the rear bumper.
What our customers are saying:
"Excellent service and communication. Expect part to be excellent too!"