Summer Starts Here - Save up to 70%
# 1
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
Fantastic prices with excellent service.. what more do you need a one stop shop. Thanks again, Pete
This item is really stout, and will give peace of mind when towing my 10,000 pound boat and trailer.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Have not hooked on to anything yet but the quality is good.
Sturdy and feels strong / heavy. Love it, except for the part when I forget it is behind the van and run into it :)) Not pleasant. Easy to install and the drop is just right for my trailer. Before I used to have to raise the tongue all the way to the top of the jack, now it feels like it is just there. The trailer seems to be well balanced now.
# 3
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
Fast shipping. Installed the hitch in 10 minutes. The video is a great help to make the process speedy. Thank you. You will be getting lots more of my business in the near future.
Works well. With a 10K hydraulic lift trailer that only has a foot of clearance in the up position this did a good job of leveling the trailer, I rarely bottom out now, where as before transitions to inclines were often a problem Now the Van pulling it handles better.
# 4
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Extended out just where I needed it.
# 5
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
I’m pleased with the product and how prompt the delivery was. However the packaging was insufficient and the packaging was torn open all over. Scuffing of the finish is a result and of little consequence due to the intended use. It’s a stinger w/ball for motorhome. May I suggest better packaging in the future
Slightly longer, so you can open your tailgate with a cargo trailer attached. Trailers with a tongue jack that is forward are problematic for tailgates...
# 6
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Sturdy and feels strong / heavy. Love it, except for the part when I forget it is behind the van and run into it :)) Not pleasant. Easy to install and the drop is just right for my trailer. Before I used to have to raise the tongue all the way to the top of the jack, now it feels like it is just there. The trailer seems to be well balanced now.
The ball mount connects my 4x4 Ford Van to my Keystone Zeppelin 271 travel trailer. I needed a mount with a 3" drop and 10,000 lbs capacity, which this unit supports. It works as expected and needed.
# 7
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
The Cushioned Ball Mount with an 8-3/4" Rise was needed to allow a 2004 Ford Van to tow my offroad capable Chalet Camp trailer. The Trailer sits level with the ball at ~20" off the road while this van's receiver sits at just over 11". The 10,000lb rating on this mount is way overkill for this 1500lb trailer but the cushioning should help avoid the "Klunk" sound every time we stop or takeoff. Thanks to Patrick and the Crew at etrailer for their help with this selection.
Excellent product, but I am writing this review about the service. Etrailer shipped these parts to a campground so I could install on my new RV. Service and shipping is excellent.
# 8
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K
Fantastic prices with excellent service.. what more do you need a one stop shop. Thanks again, Pete
Its been a year and I aint broke it yet. I use this hitch to tow my 7Klb trailer. The trailer is tongue heavy and I needed something rugged to tow it with. Haven't had any troubles with this hitch.
# 9
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
The hitch and the trailer ball with the hitch was perfect for making my trailer level behind my vehicle
Shipping was a mess, lost the first one in the mail somewhere because no one thought a 50# hitch would punch through cardboard. It is working as expected, but does not seem to be a true 2" drop.
# 10
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
The Cushioned Ball Mount with an 8-3/4" Rise was needed to allow a 2004 Ford Van to tow my offroad capable Chalet Camp trailer. The Trailer sits level with the ball at ~20" off the road while this van's receiver sits at just over 11". The 10,000lb rating on this mount is way overkill for this 1500lb trailer but the cushioning should help avoid the "Klunk" sound every time we stop or takeoff. Thanks to Patrick and the Crew at etrailer for their help with this selection.
Excellent product, but I am writing this review about the service. Etrailer shipped these parts to a campground so I could install on my new RV. Service and shipping is excellent.
# 11
Curt Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 9-3/8" Long - 10,000 lbs
Fast shipping. Installed the hitch in 10 minutes. The video is a great help to make the process speedy. Thank you. You will be getting lots more of my business in the near future.
Works well. With a 10K hydraulic lift trailer that only has a foot of clearance in the up position this did a good job of leveling the trailer, I rarely bottom out now, where as before transitions to inclines were often a problem Now the Van pulling it handles better.
# 12
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 13
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K
Sturdy and feels strong / heavy. Love it, except for the part when I forget it is behind the van and run into it :)) Not pleasant. Easy to install and the drop is just right for my trailer. Before I used to have to raise the tongue all the way to the top of the jack, now it feels like it is just there. The trailer seems to be well balanced now.
The ball mount connects my 4x4 Ford Van to my Keystone Zeppelin 271 travel trailer. I needed a mount with a 3" drop and 10,000 lbs capacity, which this unit supports. It works as expected and needed.
# 14
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
The Cushioned Ball Mount with an 8-3/4" Rise was needed to allow a 2004 Ford Van to tow my offroad capable Chalet Camp trailer. The Trailer sits level with the ball at ~20" off the road while this van's receiver sits at just over 11". The 10,000lb rating on this mount is way overkill for this 1500lb trailer but the cushioning should help avoid the "Klunk" sound every time we stop or takeoff. Thanks to Patrick and the Crew at etrailer for their help with this selection.
Excellent product, but I am writing this review about the service. Etrailer shipped these parts to a campground so I could install on my new RV. Service and shipping is excellent.
# 15
Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K
Well the first one was lost in shipping so I had to buy something local but I will definitely be using this one instead. It is MUCH beefier then the 14K one I picked up locally.
I have a truck with a class 5 hitch. Using the 2" to 2 1/2" adapter had a lot of play in it and this ball mount removed that play. The truck and me won't bounce around so much. Thanks for the great deal and fast shipping. Will be shopping with you again. Thanks again.
# 16
Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
Fantastic prices with excellent service.. what more do you need a one stop shop. Thanks again, Pete
Its been a year and I aint broke it yet. I use this hitch to tow my 7Klb trailer. The trailer is tongue heavy and I needed something rugged to tow it with. Haven't had any troubles with this hitch.
What our customers are saying:
"Excellent service. Didn't have to ask them for a tracking number. they took care of that. will buy again from them."