Most Popular Steel Shank - Gloss Black for 2010 Dodge Ram Pickup

product is heavy duty and as they state delivery was prompt

I had the 2.5" receiver for my 2014 Ram 2500 so it was a no brainer to go with the Curt 2" receiver for my 2002 Chevy 2500.

Just received the curt trailer hitch receiver. Getting the tools out was the hardest part of the installation. Had it on and ready to go in 15 minutes. Delivery was fast and install was simple.

Sturdy and well made. Reasonable cost.

Product has performed.as advertised. Happy with it.

Excellent product and excellent instructional videos!

I ordered the D900 after purchasing a new truck that is to high for my enclosed equipment trailer (6x12) and dump trailer (6x10) to use a standard drop down hitch. The D900 drops down approximately 5 1/2" and solved this problem for me. It also is capable of rising as well which helps out some on steep inclines (driveways). It installs easily and the tri-ball for me was mandatory as both my trailers use different ball sizes. It was put into use immediately and has performed well to date. This hitch is very well made and appears to be quite durable. I also like how it extends my trailers out slightly farther than my previous set up which has allowed me a tighter radius when backing into tight spots.

I haven't used this hitch much over the last year that I've owned it but I've been completely satisfied every time I have. I'd recommend it to anyone who is looking for a"one stop" hitch. My experience with etrailer has been great, too, and I will be a customer for life as long as they continue to provide quality products at great prices.

This is a heavy (solid) receiver. Arrived on time and as expected.

Purrfect! Thanks etrailer.

Good heavy duty product .

I had to take trip with my new Ram 1500 Bighorn and towing my utility trailer with my old hitch wasn't having my trailer level. These items made it level and had no issues at all. Thank you, Joe

Nice little hitch for the $. Puts my car trailer right where it needs to be on a 2010 Dodge Ram 2500 with a 6" lift and 37" tires. It's made in the USA. Good welds. It's rated 10,000lbs trailer / 2,000lbs tongue where most other steel ball mounts with this much drop are 5,000lbs trailer / 500lbs tongue.

it's nice to drive down the road with out the klunking you get with a regular ball mount

Nice little hitch for the $. Puts my car trailer right where it needs to be on a 2010 Dodge Ram 2500 with a 6" lift and 37" tires. It's made in the USA. Good welds. It's rated 10,000lbs trailer / 2,000lbs tongue where most other steel ball mounts with this much drop are 5,000lbs trailer / 500lbs tongue.

it's nice to drive down the road with out the klunking you get with a regular ball mount

product is heavy duty and as they state delivery was prompt

What is there to say about a perfect hitch like this one? Why haven't you got it yet would be it. I have a 2015 Dodge Ram 2500 and it went low enough for any trailer I pulled. Performed perfectly at pulling any trailer, of any size, of any weight. Still use it today (2023) It does have a locking bolt if you don't like hitch ball rattle. But you don't have to use it and it works fine without it. The hitch rattle doesn't bother me. I guess the only thing I would have liked is if it had come with another drop hitch with 1 7/8 ball on one side. And maybe a hook or a hole for a clevis on the other side.

This product has the lowest drop of any bar I could find while still supporting 7500lbs. I needed it because I just bought a big flatbed landscaping trailer, and when I tow it, I do so with a Y-connector and a bike rack. With the 7500lb drawbar that came with the new trailer, there wasn't enough room above the ball hitch to connect or disconnect the trailer to it without removing the bike rack first. This product solves that problem.

2008 Dodge Ram 1500 short bed. Backed it on some ramps, no need to drop the spare tire. Took about an hour to install. I work for JDog junk removal and hauling, so I was able to test the Hitch with several trailer loads . It works as discribed. . .

I had to take trip with my new Ram 1500 Bighorn and towing my utility trailer with my old hitch wasn't having my trailer level. These items made it level and had no issues at all. Thank you, Joe

Ultra heavy duty ball mount . Hooked up tonight to a New Holland Roll Belt 560 round baler on a Ram 3500 with a tongue weight of 1900 lbs. Pulled like a dream !!!!

I needed this hitch, because I have multiple trailers with different ball sizes, and both of them need some drop. It works perfectly, easy to use, feels durable and the price was reasonable as well. I would definitely choose it again.

Really like the hitch. Changes ball size easily and plenty sturdy. Only thing I wish I did different is get the 2 1/2” shank instead of the 2” for my Ram 2500 Cummins. I bought the hitch so it would also fit my son’s Ram 1500. I have to use a 2” to 2 1/2” sleeve and it’s a little sloppy. No fault of the hitch though.

Easy to install. took me longer than 30 min but it worth it. thanks. will be buying more products here

Thanks etrailer. .fast friendly. Looks good. Get job done.best deal to..like the part I can call talk to real person and take my order. .I will be back again. .have 2014 Ram 3500 dually nice fit looks strong.

Click to Enlarge

Nice little hitch for the $. Puts my car trailer right where it needs to be on a 2010 Dodge Ram 2500 with a 6" lift and 37" tires. It's made in the USA. Good welds. It's rated 10,000lbs trailer / 2,000lbs tongue where most other steel ball mounts with this much drop are 5,000lbs trailer / 500lbs tongue.

it's nice to drive down the road with out the klunking you get with a regular ball mount

Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.

This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.

Etrailer has been great to work with. Usually the lowest price and good service. The hitch is made in china, but is backed by Reese so should be trustworthy. I will pull a 14K equipment trailer with my 1 ton ram. Glad my truck came with a class V hitch. I like the extra capacity of the 2.5" hitch!

Items arrived ahead of schedule in great shape; fit my 2014 RAM 2500 perfectly.

Nice little hitch for the $. Puts my car trailer right where it needs to be on a 2010 Dodge Ram 2500 with a 6" lift and 37" tires. It's made in the USA. Good welds. It's rated 10,000lbs trailer / 2,000lbs tongue where most other steel ball mounts with this much drop are 5,000lbs trailer / 500lbs tongue.

it's nice to drive down the road with out the klunking you get with a regular ball mount