Most Popular No Ball for 2010 Dodge Ram Pickup

Just received the curt trailer hitch receiver. Getting the tools out was the hardest part of the installation. Had it on and ready to go in 15 minutes. Delivery was fast and install was simple.

Sturdy and well made. Reasonable cost.

Product has performed.as advertised. Happy with it.

Excellent product and excellent instructional videos!

This is a heavy (solid) receiver. Arrived on time and as expected.

Purrfect! Thanks etrailer.

Good heavy duty product .

I had to take trip with my new Ram 1500 Bighorn and towing my utility trailer with my old hitch wasn't having my trailer level. These items made it level and had no issues at all. Thank you, Joe

Nice little hitch for the $. Puts my car trailer right where it needs to be on a 2010 Dodge Ram 2500 with a 6" lift and 37" tires. It's made in the USA. Good welds. It's rated 10,000lbs trailer / 2,000lbs tongue where most other steel ball mounts with this much drop are 5,000lbs trailer / 500lbs tongue.

it's nice to drive down the road with out the klunking you get with a regular ball mount

Nice little hitch for the $. Puts my car trailer right where it needs to be on a 2010 Dodge Ram 2500 with a 6" lift and 37" tires. It's made in the USA. Good welds. It's rated 10,000lbs trailer / 2,000lbs tongue where most other steel ball mounts with this much drop are 5,000lbs trailer / 500lbs tongue.

it's nice to drive down the road with out the klunking you get with a regular ball mount

I had to take trip with my new Ram 1500 Bighorn and towing my utility trailer with my old hitch wasn't having my trailer level. These items made it level and had no issues at all. Thank you, Joe

Ultra heavy duty ball mount . Hooked up tonight to a New Holland Roll Belt 560 round baler on a Ram 3500 with a tongue weight of 1900 lbs. Pulled like a dream !!!!

This product has the lowest drop of any bar I could find while still supporting 7500lbs. I needed it because I just bought a big flatbed landscaping trailer, and when I tow it, I do so with a Y-connector and a bike rack. With the 7500lb drawbar that came with the new trailer, there wasn't enough room above the ball hitch to connect or disconnect the trailer to it without removing the bike rack first. This product solves that problem.

Very stout and solid. Fits a ball with a 2 3/4" or 2 5/8" shanks perfectly, so there isn't too much thread hanging out below waiting to get damaged. It slips into the Ram hitch receiver without much slop, but I haven't towed with it yet.

Nice little hitch for the $. Puts my car trailer right where it needs to be on a 2010 Dodge Ram 2500 with a 6" lift and 37" tires. It's made in the USA. Good welds. It's rated 10,000lbs trailer / 2,000lbs tongue where most other steel ball mounts with this much drop are 5,000lbs trailer / 500lbs tongue.

it's nice to drive down the road with out the klunking you get with a regular ball mount

This product has the lowest drop of any bar I could find while still supporting 7500lbs. I needed it because I just bought a big flatbed landscaping trailer, and when I tow it, I do so with a Y-connector and a bike rack. With the 7500lb drawbar that came with the new trailer, there wasn't enough room above the ball hitch to connect or disconnect the trailer to it without removing the bike rack first. This product solves that problem.

Excellent product and easy install on my Ram Express. I have been pulling a 33' travel trailer with no issues. You can't go wrong with this product.

Received it today. I have towed for all my life. Know quality when I see it. Solid metal, should get many yearS use out of this. 8 inch drop is perfect for my Dodge Ram 2500. My utility trailer sits perfect level. More than pleased with the quality.

Hitch is great. The 8" drop on a 2017 Ram 4X4 with 6 inch lift kit is perfect.

Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.

This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.

Etrailer has been great to work with. Usually the lowest price and good service. The hitch is made in china, but is backed by Reese so should be trustworthy. I will pull a 14K equipment trailer with my 1 ton ram. Glad my truck came with a class V hitch. I like the extra capacity of the 2.5" hitch!

Items arrived ahead of schedule in great shape; fit my 2014 RAM 2500 perfectly.

This product has the lowest drop of any bar I could find while still supporting 7500lbs. I needed it because I just bought a big flatbed landscaping trailer, and when I tow it, I do so with a Y-connector and a bike rack. With the 7500lb drawbar that came with the new trailer, there wasn't enough room above the ball hitch to connect or disconnect the trailer to it without removing the bike rack first. This product solves that problem.

Just like the description. This this is Heavy duty for sure.

Click to Enlarge

This product has the lowest drop of any bar I could find while still supporting 7500lbs. I needed it because I just bought a big flatbed landscaping trailer, and when I tow it, I do so with a Y-connector and a bike rack. With the 7500lb drawbar that came with the new trailer, there wasn't enough room above the ball hitch to connect or disconnect the trailer to it without removing the bike rack first. This product solves that problem.

Very stout and solid. Fits a ball with a 2 3/4" or 2 5/8" shanks perfectly, so there isn't too much thread hanging out below waiting to get damaged. It slips into the Ram hitch receiver without much slop, but I haven't towed with it yet.

This product has the lowest drop of any bar I could find while still supporting 7500lbs. I needed it because I just bought a big flatbed landscaping trailer, and when I tow it, I do so with a Y-connector and a bike rack. With the 7500lb drawbar that came with the new trailer, there wasn't enough room above the ball hitch to connect or disconnect the trailer to it without removing the bike rack first. This product solves that problem.

The hitch choice didn't work for my 2016 Ram 2500. The trailers that I needed to tow had a fixed trailer jack. If I lowered my tailgate, due to it's big lip design, it would hit the jack. I resorted to a hitch that was longer and was adjustable.

it's nice to drive down the road with out the klunking you get with a regular ball mount

Nice little hitch for the $. Puts my car trailer right where it needs to be on a 2010 Dodge Ram 2500 with a 6" lift and 37" tires. It's made in the USA. Good welds. It's rated 10,000lbs trailer / 2,000lbs tongue where most other steel ball mounts with this much drop are 5,000lbs trailer / 500lbs tongue.

Nice little hitch for the $. Puts my car trailer right where it needs to be on a 2010 Dodge Ram 2500 with a 6" lift and 37" tires. It's made in the USA. Good welds. It's rated 10,000lbs trailer / 2,000lbs tongue where most other steel ball mounts with this much drop are 5,000lbs trailer / 500lbs tongue.

it's nice to drive down the road with out the klunking you get with a regular ball mount