# 1
Dexter Trailer Springs Over-Under Conversion Kit
Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.
Great conversion kit, easy to get the plates lined up perfectly. I welded the new saddles onto the axle and welded the nuts to the bolts so there is zero chance of anything moving. Having the plates held in perfect position while welding made it simple. Solved the "dragging wheels problem" without having to cut off and reweld the fenders (which had been welded without enough clearance to the tires at the factory.)
# 2
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.
# 3
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
Excellent, had everything I needed and more for my trailer. Everything fit well!
This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!
# 4
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
I got these for my 1998 Trail-et gooseneck 2 horse trailer after we upgraded from a 1994 truck to a 2023. The new truck is much taller so I needed to lift the trailer. This kit was perfect, all of the holes lined up perfectly and it gave me the height I needed. The hardest part was cutting the old bolts off the trailer.
This was a very easy install in the driveway. Only a couple hours start to finish.
# 5
Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
New bolts made replacement of springs easy
Good quality shackle bolts. Would buy again!
# 6
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
My small dumping trailer was bouncing and swaying all over the place. After installing this shock kit, it follows along like a dream. A more than worthwhile investment. Easy to install, great customer service. Thanks!!!
Not a trailer, but... We needed a set of shocks for a three-wheeled motorcycle truck conversion for our resort/farm in upper Thailand. I had to pack it in my luggage for the trip over. The vehicle came with no shocks on the back axle and the ride was really bad. This kit, with a bit of modification, really did the job and the ride is now significantly better in terms of smoothness and handling. Shocks were a bit long, but it worked out OK.
# 7
Torflex Lift Kit - Single Axle - 2-5/8" Lift
The trailer is a Palomino Solaire 147x. Installation was straightforward. The lift in combination with taller wheels and tires accomplished the desired ride height.
Can you believe that etrailer asks for reviews after a year? That's confidence in their products! The Torflex Life Kit for my 2014 Casita 17 Deluxe Independence has worked great. I no longer drag going through dips and up my steep driveway.
# 8
Torflex Lift Kit - Tandem Axle - 2-7/8" Lift
I think the lift kit is a very stout piece of hardware. I'll be installing it on Friday on an Airstream camper. Will give an update on how well it fits after the install. I gave 4 stars because the packaging could be better - almost lost some bolts or nuts. The delivery person had to tape it all up - must have fallen in travel and busted open.
I ordered this kit in mid-May after seeing an email about it from a competitor site to etrailer.com. I ordered from the other site then got an email stating that the kit was on back order from Dexter until the end of June. I googled the Dexter part number and found that etrailer.com also sold it, and even better, etrailer was offering free freight and a slightly lower cost. Since the kit is heavy, free freight would save me about $40, so I cancelled the order with the first company and re-ordered from etrailer.com. I got an email from them as well about the extended back order but then, I also got a follow up call from them explaining the situation. The call was an extra added touch that I appreciated. Then, right at the end of May, I got an email stating that my Dexter kit had shipped, so I figured that etrailer.com must have put some pressure on Dexter to get off their butt and ship it! The kit itself was great, really well made parts, powder coated and heavy gauge. Honestly, I am surprised that they sell it for only $150. The install is tricky and will take you 6 hours if you are good with tools and like wrenching. Don't attempt this project on your own if you are not. Pay a trailer guy $400 to do it. You have to keep the axles aligned when you drop them...and the bolt placement is not great so you have to have hands that can fit in the tight cramped space and be able to get a wrench on the. Over all, I am very happy with the lift, it was a pretty simple and cost effective way for me to get better clearance for my Airtsream.....Airstreams are notoriously low and with the approach I have from my street to the driveway, I constantly battled dragging either the hitch or the rear. This kit solved that. I am super satisfied and highly recommend it if you are in the same situation as I was. Buy it from etrailer.com, they have the best customer service I have experienced when buying trailer and camping items on the internet.
# 9
Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
I havent really gotten a chance to use the trailer much since my purchase of the leaf springs. But they went on perfect and the stance is perfect. With a weight load , they should be just right.
# 10
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
It looks like it will fit my 1954 Jeep CJ3-B Dana 44 axle tube, although it is 1/8" wider than ideal. Thanks
Spring perches as described
# 11
CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
Arrived well packed and as advertised. I'm going to pull the azle out of the boat trailer and wanted to have this 'on hand' should I break some of my U bolts. I've bought from you before - always been happy, thanks
# 12
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
Shipped fast looks good will be putting it on my trailer this weekend.
I bought the spring kit to put on my home built trailer that I put my old heavy slide-in camper on. It more than met my expectations. There was no sway at 75mph or on the 5 mile trail back to camp.
# 13
CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
etrailer has become my source for almost everything for repairing or upgrading our trailer, the replacement of broken leaf springs being the most recent project. If you have questions about the correct part for your project, search the customer service frequently asked questions. There is a lot of helpful information in there that you may not find on other websites. You can also contact customer service if you don't find a useful answer.
Customer [service] was great in helping me identify the correct parts for my car hauler. Ordered on Monday, package arrived Wednesday w free shipping. HUGE difference in ride quality!
# 14
Dexter Trailer Springs Over-Under Conversion Kit
The price & quality of this kit is unbeatable. When faced with the option of gaining more ground clearance got my trailer I had two choices - fabricating my own or buying this. It's a no-brainier. Thanks again etrailer!
The lift worked out perfectly,I had the place where I bought the trailer install them because I didn't have a welder to weld the saddle mounts to the axle and that's a must for a safe installation,also I had the place where I bought the trailer do it because they had the capability to align the axle perfect to the trailer after the installation. The lift added approximately 5 inches to the trailer hight so I could install the off road wheels and tires.The lift didn't affect the handling of the trailer at all.
# 15
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
I am sorry but I can not remember names but I talked with two very helpful ladies and could not have been happier with their assistance. Thanks again, the trailer build is going great.
My 6' x 10' landscape trailer was a homemade by a prior owner. While it was mostly constructed very well, the spring hangers were not correct. The spacing for the springs was also wrong, and it had very little fender clearance. There was also evidence that the spring U-bolts had contacted the frame on occasion. (I do not carry loads anywhere near the 3500# axle rating.) I added an extra set of holes on the front hangers in case the ride height proved to be too much, but I like the way it sits with the stock holes. I don't think I'll be utilizing the extra holes. This kit was just the ticket to increase the suspension travel and fender clearance on my landscape trailer. Now it "sits right"!
# 16
CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
The u-bolts have stood up pretty well to the elements and strong enough to pull my full 2k pound trailer. So far so good with the zinc protection, hope it lasts as good as other finish options
# 17
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
These hangers are great for the center. They provide just enough clearance for your equalizer. Because of the length and being that I am a welder I added a support inside the hanger to keep them rigid!
Megan was very helpful with helping get this order together and communicating with parts being shipped from other locations. Thank you so very much Megan!!!!
# 18
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
Bushings quiet the trailer for a short period of time. Bushings wear out and squeaks return quicker than I expected.
# 19
Torflex Lift Kit - Single Axle - 2-5/8" Lift
Installed on a 2017 NuCamp Tag XL. Needed a little extra head room for the kitchen clamshell. Install was easy with basic tools, a couple jack stands, tape measure and some red loctite. Lift height is as claimed because it directly lifts the axle. Product has worked great, nothing has come loose or shifted. Stability towing has not changed. The only trouble is the wiring for the fender light is a little tight but that is a camper issue, no fault of the lift.
Very easy to put on, took about 2 hrs. Make sure you order the correct sized one. Don't just go by the axle number measure the frame width and distance between the holes. Makes a big difference on what my camper can clear and the size of dips I can get thru without hitting. Get a few extra blocks for the stabilizer.
# 20
Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
I used this kit while replacing springs. Much heavier hardware than what was replaced. Should be good for another 25 years!
Great upgrade for my Dexter axle. My old hangers were toast and of much lesser quality. I have about 40,000 miles on the old set.
What our customers are saying:
"Product arrived very quickly. Everything was there and fit properly. I'm very satisfied."