# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Ordered online the package arrived early. Installation for the hitch was simple if you are familliar with typical auto work. Pnumatic tools reccomended. Plug - n- Harness.----well it works....I had to dissasemble the whole rear cargo area of the Xterra to get to the connectors. The instructions from the manufacturer are terrible. Definately needs a picture with each step. This should not be attempted by a novice.
Very good Quality with a good finish
# 2
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Ordered online the package arrived early. Installation for the hitch was simple if you are familliar with typical auto work. Pnumatic tools reccomended. Plug - n- Harness.----well it works....I had to dissasemble the whole rear cargo area of the Xterra to get to the connectors. The instructions from the manufacturer are terrible. Definately needs a picture with each step. This should not be attempted by a novice.
Very good Quality with a good finish
# 3
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I have 10' xterra and I ordered this so could tow my pop up and use a bike rack. it showed up looking just like the picture. I have a Yakima 4 bike rack and it fit fine. But the catch is I had to hook up the camper and the put the rack on. Then take the bike rack off to unhook the camper. It's trivial but it takes time. Also with your bike rack loaded with bikes watch your turns so your bikes don't hit stuff like your propane tank. Remove bike tires if necessary. Overall it's a sturdy hitch and I have no big complaints.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 4
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
Exactly what I needed. The recommendations for ball height, between my Coleman camper and my Nissan XTerra were right on. Fits perfectly in the receiver on my vehicle.No issues at all.
solid, heavy, well-made
# 5
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 6
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 7
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Awesome product. Awesome service. Quick delivery. Couldn't be better!
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
# 8
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 9
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 10
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 11
Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs
Awesome product. Awesome service. Quick delivery. Couldn't be better!
All of the items arrived on time and not damaged in any way. Excellent quality products.
# 12
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 13
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 14
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs
Ordered online the package arrived early. Installation for the hitch was simple if you are familliar with typical auto work. Pnumatic tools reccomended. Plug - n- Harness.----well it works....I had to dissasemble the whole rear cargo area of the Xterra to get to the connectors. The instructions from the manufacturer are terrible. Definately needs a picture with each step. This should not be attempted by a novice.
Very good Quality with a good finish
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop -14,000 lbs
Awesome product. Awesome service. Quick delivery. Couldn't be better!
Very useful for adding tie down points. Only reason for not giving 5 stars was the need to cut off the extra length and drill new holes farther up for the pins so the units fit better.
# 16
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 17
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
# 18
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
The products (trailer hitch, ball mount kit, and electrical harness) all arrived as advertised! Excellent website and easy to use.
Perfect for me - I have a heavy boat trailer and a light-duty utility to move around. Just what I needed.
# 19
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Awesome product. Awesome service. Quick delivery. Couldn't be better!
Works great. Needed the drop to tow a utility trailer at level.
# 20
Titan Ball Mount for 2-1/2" Receivers, 3-1/2" Rise, 5" Drop, 16-1/2" Long - 13K
The hitch is not as long as it seems in the picture. When installed it extends about 8” from the face of receiver to center of ball. I was hoping for something that was about 10-12” away from receiver. The pin hole is 4.5” from rear. Quality and finish are excellent, the drop is built with 1” plate and the ball hole is 1 1/4”.
I am pleased with my purchase and Teresa at etrailer. I purchased the wrong hitch and had to reorder. I did not allow enough drop and it was my fault. I will keep the other one for different applications. Submitting photos of both.
What our customers are saying:
"The people answering the phones were professional & knowledgeable. All this and the best prices on the internet, How can you go wrong?"