# 1
Hitch Extender For 2" Trailer Hitch Receiver 7"
Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.
The Brophy hitch extender was well built and delivered the tongue weight I needed to carry my e-bikes. It did accept the Hollywood RV Rider bike rack. It did not however fit appropriately with my Drawtite hitch to allow the use of an anti-rattle bracket. This allowed too much movement of the bike rack.
# 2
Hitch Extender for 2" Trailer Hitches - 8" Long
This product has done just what I needed to get my bicycle rack mounted out beyond the spare tire on my Jeep Wrangler. As a bonus when the bike rack is not on; I have left in it as a step for climbing into the back of the Jeep. I use this product with the Curt Anti-Rattle Kit C22321 and it keeps my bicycle rack rock solid.
The length of this extension is perfect for my Jeep Wrangler TJ with Hanson rear bumper and spare tire mount swing away. I then mount the Swagman bike rack and the bikes easily clear the spare tire.
# 3
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
Exactly what I needed to make the tow bar on my Wrangler level with the motorhome. Well made
Meaty and does the job. With an additional 1-1/2" drop built into my Demco Commander II tow bar, it's a perfect fit to hitch my 2021 Jeep Wrangler to my 2020 Winnebago View. I haven't tried it yet, but I'm hoping to be able to fit a bike rack between the two vehicles.
# 4
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 2" Rise/Drop - 10K GTW, 400 lbs TW
Works well on my 2014 Wrangler Unlimited. Yakima Swing Daddy - 4 bike rack. I am able to open the gate completely until it locks.
I run a motorhome during the summer. I changed towed vehicles from a Truck to a SUV. This Hi/Lo receiver is what I required to ensure a straight tow. I went with the heavier 10K rating. Etrailer may not be the cheapest on the net, however very reliable. The picture shows the finish tow setup. The piece above everything is a motorcycle lift.
# 5
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
Functions as designed: The extension allows my bike rack to clear the rear tire on my Jeep. I added a tightening lock to secure it in place and now have no rattle or shake on the rack. Happy Jeep Owner
This item worked great for my bicycle rack that I installed on my jeep. I have a 2" hitch on my bumper. Needed a 1-1/4" adapter hitch, so my bike rack would fit.
# 6
Advantage SportsRack Hitch Extender for 2" Trailer Hitches - 11" Long
This extension works as advertised and allows plenty of clearance from the rear mounted spare tire on my Jeep Wrangler. Please note this product is for use when attaching a bike rack and not for towing trailers and such.
# 7
Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
Beefy. I have no doubts of the capacity of either side of this hitch adapter, there's plenty of weld to hold it all together. Very few options will provide minimal drop (for an off-road trailer) and minimal rise on the other side for an additional bike rack or cargo carrier. Jeeps are tough since you need to be able to open the gate. This one clears no problem. My spare is up on a slant back carrier, but I think the stock spare should clear as well. Get you a "Trimax THC200 Universal Anti-Rattle Clamp Fits 2" Hitch" and this thing is solid as stone.
The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.
# 8
Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
Fast shipping and a good product.
Perfect hitch addition to extend past the big spare tire on my Wrangler XL. Glad I got the anti-vibration version of the hitch extension.
# 9
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.
As per my last 3 orders here are some pictures of how I received the item along with what was broke or bent. I can fix it but I shouldn’t have to. So I will try elsewhere from now on cant deal with your shipping dept , anymore.
# 10
MaxxTow Hitch Extender with Step - 2" Hitches - 13-1/2" Long - 7" x 14" Platform
Affordable front step (wide platform) to service lifted vechicles and will provide distance between exterior mounted spare tire and hitch rack. Suggestion: design the step to fold up or down for a full time install.
Works as advertised. I use it full time. I painted the step surface with Herculon bed liner for a rubberized non slip surface, that works even when covered with frost or mud. Only down side, is that it reduces the tongue weight of the truck hitch by 50%. I typically use it to haul a 2 horse trailer. If it ever gets damaged, I will immediately by a replacement.
# 11
Hitch Extender For 2" Trailer Hitch Receiver 14" Long
Very nice, heavy duty extension.
It works great,by moving the trailer back from the vehicle you can load longer items,so there are not hanging over the back of the trailer. It also helps in the backing of the trailer. Thank You
# 12
Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
Who do I contact about getting the right extension bar? The one I ordered Is a 2 1/2 inch which I need a 2 inch to slide into my receiver or if you guys have a 10 to 12 inch, 2 inch extension so I can connect it I sent a photo of the end that is 2 1/2 which I need it to be 2 inches to slide into my receiver
I recently swapped out the stock 2" receiver for a 2-1/2" to allow me to purchase and use this extension to get past the end of my Lance 1010 Camper. I believe I will have no issues now towing any trailer (within allowable spec's) or carrying my motorcycle carrier. Great quality piece. can't wait to try it out...
# 13
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
The hitch arrived as promised and is as described. It's just what we were looking for to adapt our bike carrier for use on our new Jeep Wrangler.
Great product. Meet my needs. I used it on my Wife's Jeep Wrangler to extend her bike rack away from the spare tire
# 14
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.
# 15
Curt Extender for 2" Hitch Receivers -18" Long
Received my 18" extender for my 2" receiver in 3 days. It's going to work perfectly, enabling me to haul bikes with the Thule spare me bike rack at the same time as cargo on a luggage rack at the end of the 18" extender on my Jeep Wrangler. Product is super heavy, therefore, super durable.
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
# 16
Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
Perfect fit to extend hitch from under spare tire on my Jeep Wrangler.
I have included some photos of the hitch extension. The first two are just on my truck without and with the extension. Without the extension, note the proximity of bike handlebars to the tailgate. In the second photo with the extension, the handlebars are much removed from the tailgate. Note that this is a ¾ ton truck with an insert in the receiver. With the insert in place, the front holes of extension did not align with the receiver. It was short 1/8 to 3/16 inch. If needed, I could solve this issue with a smaller bolt. The next photos are without and with the extension in the receiver of our RV. With the cover on RV the dramatic effect of extension is not so obvious. In the first photo without the extension, the handlebars of bike literally contact the back of RV. In contrast in the second photo, the handlebars are 5 to 6 inches from the back of the RV. Though there are no road trips yet, I am confident that the hitch extension will protect the bike and importantly will protect the back of the RV. I hope that these comments and photos are useful to you. If no, I can try again in spring when we remove cover from the RV.
# 17
Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches
This is awesome. I am now able to use the back door on my Jeep and still keep my bike on the rack. This is my second item purchased from e-trailer. You need to let the people of Rad electric bike know about your great products. I am posting some pictures on the Facebook page for the other owners. Thanks again
The Yakima swing arm provided just what we needed to allow the use of the Hollywood RV Rider bike rack behind our 2023 Wrangler JL.
# 18
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long
Definitely a quality product. Just installed and it's very solid. Fits perfectly on the Torque Lift Hitch
Torklift SuperTruss does not disappoint. Straight forward install, though the manual photos are extremely dark. Use the Torklift YouTube install video if needed. The 48” extension gives me the needed length beyond the TC I was looking for while still allowing 1,200 tongue and 12k overall towing capacity.
# 19
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
I need an 8 inch drop between my Itasca motorhome and the Jeep Wrangler I tow behind it. Had a basic Roadmaster drop hitch before I added a bike carrier. Daisy-chained a dual hitch adapter in and was ok going to Florida from New England and back last winter with the two adapters in line together. But heading to Alaska this summer and wasn't comfortable with the extra points of failure. This Roadmaster hitch gives me the drop I need for towing and the second reciever for the bike rack in a single safe package. And kudos to eTraileelr for the very fast shipping. We leave for the great north tomorrow!! .
The Hitch adapter works great. It lined up perfectly with my Jeep Wrangler w/ 4 inch lift. I’ve used it on my Winnebago mainly for long trips and it is a beast! Tows the Jeep easily.
# 20
Reese Titan Reducer Sleeve 2-1/2" to 2"
This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up.
This fits a Curt 2 1/2 receiver perfectly. Allows me to use receiver with my various drawbars for different trailers when I am not using the Forklift hitch box extension.
What our customers are saying:
"Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair."