# 1
Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar
After disappointing schedule for ship delivery date and call to etrailer they made it right and got it picked wrapped and shipped Received it today and got it installed Ready to roll Saturday morning for trip to lake Everything fit well and about hour and half installation time!
I love both of the Roadmaster anti-sway bars I had installed right before a trip to Iowa. I purchased bushing kits for front and rear but, I didn't know the front sway bar came with new bushings. So I have an extra front sway bar bushing kit. The biggest difference I noticed right away was the handling on the highway. The people I talked to at etrailer were very helpful and always are when I call. Thanks
# 2
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
I ordered a Draw-Tite 5535 Brake Controller & adapter cable 3035-P from etrailer for my 2011 Ford Holiday Rambler F53 Chassis RV to tow my Tow Dolly with electric brakes. I ordered the parts on Saturday and received them on Thursday using economy shipping rate which was great. I received just what I ordered and installed them today (Friday) everything worked perfect and the install was very quick and easy. 0543.jpg is my Brake Controller 5535. 0544.jpg is my Adapter Cable 3035-P. 0548.jpg is a picture of the Ford Factory cable in the RV. 0535.jpg is a picture of the end of the Ford Factory cable that the Adapter Cable 3035-P plugs into. 0550.jpg is a picture of the Brake Controller 5535 installed to the right of the steering wheel.
I ordered the trailer brake adapter harness for my 2010 full size Range Rover. It fit great and its well made to do the swap, for others that will read this here is how. I found the brake connector in the truck was hidden behind the fat harness thats next to the inside left kick panel, just behind the hood release panel By pulling on the OBD 2 wire harness, I found it was tied to the OBD harness. Some say that the connector is on the left side of the steering column , in my truck is was on the far side of the fat harness so it was hard to see. I had to remove the left side console, I removed the screw, then pulled the bottom of the wood panel towards the left door, the 2 pins released, then the panel slides to the rear of the truck to dislodge the top pin. 5 screws secured the lower panel , remove the lamp ,unplug it, then remove the OBD 2 connector from its mount , slide the gray collar to the left kick panel then the harness pushes up out of its holder. Plug in your new adapter harness for your trailer brake controller, Assemble is the reverse of taking it apart. in the picture the new harness is connected to the gray connector
# 3
Extended U-Bolt Kit for Roadmaster Anti-Sway Bar
I purchased a Roadmaster sway bar kit and longer shackle bolts from E-Trailer. The sway bar came on time with free shipping! Upon closer inspection I realized I needed the longer shackle bolts. I called and found it was in stock and available in 2 days with free shipping! Their prices are very competitive and then you get excellent service. It also helps that the shipping was free at this time.
they have made the ride and handling of our motorhome a pleasure to ride in and drive.
# 4
Roadmaster Polyurethane Bushing Kit for 1-3/8" Diameter, Factory Rear Anti-Sway
I like what the kit offered but I was unable to utilize all of it. My Ford F53 anti sway bar was loose due to missing saddle bracket and only one bolt holding the other saddle bracket. Due to potential damage to other bushings I ordered this kit. During installation of the saddle brackets I discovered that there were no nuts where the missing saddle bracket was supposed to be attached. The kit did not have nuts so I had to purchase nuts (and bolts). When I tried to replace the link bushings I tried removing the old bushings exactly as advised in the instructions. However, the bushings would not break loose even trying to use a hammer to tighten the vise with the two different size sockets placed as instructed. Therefore I was not able to use the new link bushings (very disappointed). Overall, I was only able to use a small number of parts that came in the kit. The saddle brackets and bushings were all I could make use of and I had to purchase other parts.
Super easy install.
# 5
Roadmaster Polyurethane Bushing Kit for 1-5/8" Diameter, Factory Front Anti-Sway Bar
Unfortunately I only needed the sway bar bushings as I had already replaced links. I now have spares. Good job on delivery. Thanks again
I love both of the Roadmaster anti-sway bars I had installed right before a trip to Iowa. I purchased bushing kits for front and rear but, I didn't know the front sway bar came with new bushings. So I have an extra front sway bar bushing kit. The biggest difference I noticed right away was the handling on the highway. The people I talked to at etrailer were very helpful and always are when I call. Thanks
# 6
Custom Mounting Brackets for Roadmaster Reflex Steering Stabilizer
It's funny I'm writing a review for one of your employees Sherry S. today. I spent most of today dealing with two different phone service companies regarding my cell phone service and have had nothing but a complete nightmare dealing with these two companies' customer service departments. It's been a complete joke and a waste of a lot of my time today. It's not possible in today's world to find anyone in customer service willing to help the customer anymore without speaking a foreign language or spelling out exactly what you need. On the other hand, my experience of placing an order through your company's website and getting exceptional help from Sherry S. in your service department has changed my outlook. There is hope and Sherry proved it to me. She went out of her way to find a solution to what I needed, then she understood my concerns and most of all she "Listened to Me". Wow! Whatever you're paying this Lady I suggest you give her a raise and don't let her go! She showed me the most impressive customer service I've experienced in 20 years and that's the truth! Sherry, if you ever need a job in Denver then call me. I'll hire you in a heartbeat! I Truly & Sincerely appreciate your help!
Installation was straight forward and took about a hour and a half. You must use an impact wrench to break loose the nuts on the axle but that was the most difficult part of the installation. Alignment did require several attempts to get it right. Have put a few hundred miles on it now and very pleased with the results. Installed a rear sway bar and Koni shocks prior and this was the last piece needed on our 2018 36 foot Bounder.
# 7
Extended Round U-Bolt Kit for Roadmaster Anti-Sway Bars
We took our first trip with these installed over the last two months (April & May 2021 4,000 miles). All three of these were put on at the same time front & rear anti sway bars with the extended length U-bolts. The RV handled great.
easy to in stall on my RV for the roadmaster sway bar.... Cathy T at trailer is the best on line Rep there is at E trailer .... she helped me get this product and it fit my rig ... I have a 2018 holiday rambler and i added an additional sway bar on the rear ... had to have this product to do it John A
# 8
Custom Mounting Brackets for Roadmaster Reflex Steering Stabilizer
Perfect fit for my 2023 Coachman Pursuit
Make sure you call roadmaster to confirm the correct part number to make sure you get the proper installation kit for the reflex steering stabilizer. I found out there are numerous hardware kits for the different applications. If I would have ordered the one I thought I needed it would have been wrong.
# 9
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
They are the best at what they do. They found the parts I needed and got them to me the next day. I appreciate the dedication to their customers. This product worked for my 1997 Ford F350 with the factory-installed tow package.
Everything was as described. Easy easy installation in 10 minutes. Not the top of the line controller but it's all I need. Very fast shipping as well. Couldn't be more happy with etrailer. I will be purchasing my fifth through etrailer soon!
# 10
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 6" Rise/Drop - 6K GTW, 200 lbs TW
Once again, Etrailer had just what I was looking for. This 6 inch lowering hitch allows my electric bike carrier to be lowered by 6 inches so that I do not have to lift so high to load the bikes. The extension also allows me to open the tailgate even with the bikes loaded.
Roger and everyone at etrailer do a wonderful job. Always there to steer you in the right direction. If you go somewhere else your probably making a mistake.
# 11
Replacement Motor for Kwikee Electric RV Steps - 12V
etrailer customer service is 5 star however kwikee step motor and gear box are poor design, short life span. Uses a metal gear meshing to plastic gear is terrible engineering. I replaced 3 motors and 1 gear box on 2 different Tiffin in 10 years. I’m sure some owners have had better luck but hasn’t been my case and according to social media a lot of people post step problem. I ordered my last motor from etrailer because along with my 10 year history with buying from etrailer if you call them they make sure you buy the correct part. They ship on time and I have never had a problem with them but confident if I did it would get resolved quickly and satisfactorily.
Very helpful with installation when I was having trouble aligning connections!
# 12
Motor Upgrade Kit for Kwikee Electric RV Steps
Very good customer service, and received my order on time. The job and the finished result turned out perfect, the steps work like brand new !! Thanks for the help etrailer !!
Have a 97 RV that I put this on. Easy install, great torque on the drive. Stairs pull up nice and tight. Order arrived fast. Would recommend the assembly and etrailer to anyone.
# 13
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 6K GTW, 200 lbs TW
The tow bar rise extension was exactly what I needed to raise up the attachment point for my Roadmaster Falcon All-Terrain tow bar when pulling my Jeep Wrangler. Perfect fit and finish.
Good quality, perfect fit, didn't have to modify anything!
# 14
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 6" Rise/Drop - 10K GTW, 400 lbs TW
Simple to install and absolutely needed to keep the tow bar within 3" of the hitch height. Plus when I went over a steep driveway in my 30' Winnebago Vista, I was concerned that this may bottom out - but instead, there was a frame rail under the RV that scraped instead. This unit was well clear. If you find yourself in a situation where this could scrape the ground, it is easy just to put the brake on in the car and pull the release pin on the this unit. Then, reconnect later.
Works like a charm! I bought an entire toad tow package kit wiring, breaking system tow bar, base plates everything ! My ranger all the way to Mount Rushmore last year and everything worked great! The trailer support was excellent whilst I was installing everything! Multiple calls to tech-support got me through and made for a successful install. I would not hesitate to buy From them again!
# 15
Second Motorhome Braking Monitor/Alarm Kit for Roadmaster 9700 and InvisiBrake Systems
Fast service, right parts as always with etrailer
Great service! Best price and best delivery. Thanks to Ed P.s. Got to have this part in order for your Invisibrake System to operate!!!
# 16
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 8" Rise/Drop - 10K GTW, 400 lbs TW
This works perfect when I hook up my 2022 GMC Canyon (Stock height) to my motorhome to maintain level tow bars.
Exactly what I was looking for and it arrived in 2 days! Highly recommend E-trailer!
# 17
The product is very well built, thick material on the E track system ensures me that it will last a very long time. The E track tie down rings are easy to use and welded up with precision and care. It is a great addition to my new Trailer and look forward to using them for years to come! Thank you for making such a great product at an affordable price.
Great Product! I installed E-Track the whole length and down both sides inside my 28' enclosed trailer so that I can tie down anything!!
# 18
Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW
Just what I needed to get my load distribution hitch balanced properly Etrailer customer service was very helpful
The product was fine but the box it arrived in was torn and the product in view.
# 19
Roadmaster High-Low Adapter - 2" Hitches - 10-1/4" Rise/Drop - 10K GTW, 400 lbs TW
The item looks fine. The implement would not slide into the hitch as the tolerance was too slim, not sure if it was the receiver or the implement, but I had to grind down the edges of the implement to get it to slide into the hitch.
etrailer customized the RM-048-10 by lengthening the shaft so that it would fit through the bumper of our Class C RV and be strong enough to support the Stowaway 2 Cargo Carrier. It works beautifully! During travel there is some left to right wiggle that occurs with the carrier. We solved this problem with ratchet straps to secure both sides of the carrier. The hitch is stout and strong, and does the job! Of course we strengthened it with the clamps, so the hitch is solid and unmovable. With the custom hitch, the Stowaway 2 carrier is lifted enough so that it doesn't bottom out when traveling up or down steep hills. etrailer staff are very easy to work with, along with the brilliant engineers who communicated well with the exact details of the design to assure the build worked safely. It is an excellent hitch; worth the value. We're on the road again with all of our lawn chairs/tables, etc. in the cargo carrier out of the elements, instead of inside the RV. Great work, etrailer! Thank you! S&S
# 20
Blue Ox Accessory Kit for Alpha 2 Tow Bars - Tail Light Wiring - 7-Way to 6-Way Cable - Lock Set
Ordered this and was told it was out of stock till December, this was ok. But when the base plate and tow bar came so did the accessory kit. Wow that was great service.
Great quality installed the light kit on a Jeep JK with no issues, locks look great have not used them yet. Coil cord is very good quality too.
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"