Roadmaster Polyurethane Bushing Kit for 1-5/8" Diameter, Factory Front Anti-Sway Bar

See what our Experts say about this Roadmaster Accessories and Parts

• Replacement Bushing Kit for 2004 Fleetwood Southwind Front Anti-Sway Bar
  We do have bushings for your 2004 Fleetwood Southwind front anti-sway bar. If you have the 1-1/2" diameter anti-sway bar you need the Roadmaster Polyurethane Bushing Kit # RM-4139-125. If you have the 1-5/8" you need the # RM-4139-127. Both include the 2 bushings and the necessary hardware for installation.
  view full answer...
• Anti-Sway Bar Bushings For 2005 Ford F-550 Chassis Class A Motorhome
  We do have bushing kits for the OEM anti-sway bar on your Sea Breeze built on a 2005 Ford F-550 chassis, and the bushings include the brackets as well. There are different bushings depending on the diameter of your anti-sway bar, so you will need to measure it to ensure you get the right kit, and I'll list out the options for you: - Rear 1-1/2" Diameter Bar: Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar # RM-4139-125 - Rear 1-3/8" Diameter Bar: Roadmaster...
  view full answer...
• Front Sway Bar Bushing that Fits 1-1/2 inch Diameter 2016 Thor ACE 29.4
  We have a bushing kit that fits the 1-1/2 inch sway bars that it sounds like you need with the part # RM-4139-125 which is designed for that size sway bar. This comes with a complete set for everything. To correct the steering issue of your motorhome a steering stabilizer would be what you'd need with the Roadmaster Exact Center stabilizer part # RM36RR.
  view full answer...
• Upgrading to Polyurethane Anti-Sway Bar Bushing On a 1998 Damon Daybreak
  The Roadmaster Polyurethane Bushing Kit part # RM-4139-127 for front and part # RM-4139-125 for rear are correct for a 1998 Damon Daybreak. We do offer just the replacement bushings for these but they are not designed to be used with the factory brackets. If done so, you risk the chance of the bushing slipping out causing damage as well as risking losing control of the motorhome. I don't have any dimensional drawing of the replacement bushings unfortunately.
  view full answer...
• Replacement Anti-Sway Bar Bushings for Motorhome On Ford F-53 Chassis
  In order to replace just the factory anti-sway bar bushings on a Ford F-53 Chassis you have a few options which will be based on the location of the anti-sway bar (front/rear) and the gross vehicle weight rating of the coach (15,700 lbs, 16,000 lbs etc.) or diameter of the factory sway bar (1-1/2", 1-3/8", or 1-5/8"). If you need bushings for a front anti-sway bar and it is 1-5/8" diameter then you can use the Roadmaster Polyurethane Bushing Kit part # RM-4139-127 but if you need bushings...
  view full answer...
• What Are the Dimensions of Roadmaster Polyurethane Bushing Kit # RM-4139-127
  I pulled the Roadmaster Polyurethane Bushing Kit # RM-4139-127 from our warehouse and took measurements for you. The metal bracket measures 4-1/2 inches center on center holes and 6-3/16 inches outside to outside. The linked photos show you the key dimensions of this replacement bushing for Ford F-53 (front) OEM bushings and brackets with 1-5/8 inch diameter.
  view full answer...
  
• Dimensions of Bushings in Roadmaster Rear Anti-Sway Bar Kit RM-1139-145
  The blue domed bushings in the Roadmaster Rear Anti-Sway Bar kit # RM-1139-145 are shown in the linked photo. Dimensions are indicated for you. Please note that the bushings and hardware for this sway bar are offered on their own as kit # RM-4139-127.
  view full answer...
  
• Suspension Enhancement for Itasca RV on 2014 Ford F-53 Chassis
  I recommend having your suspension checked out to make sure there are no issues, but if everything is fine, suspension enhancement springs would help level your Itasca. I could not guarantee this will "fix" your lean but the SumoSprings Maxim Custom Helper Springs # SSR-187-54-1 are designed to help keep your RV level and minimize sway. These springs are for 2-wheel drive models - as each of the available springs we offer are - with a GVWR between 20,000 and 26,000 lbs. As for the bushings,...
  view full answer...
  
• Replacement Bushings 2007 Four Winds Hurricane On 2006 Ford 53 Chassis
  Depending on the diameter of your existing bushings the Roadmaster Polyurethane Bushing Kit for 1 5/8 inch diameter # RM-4139-127 may fit. We also offer a few other sizes to choose from. Rear 1 1/2 inch Diameter Bar: Roadmaster Polyurethane Bushing Kit for 1 1/2 inch Diameter, Factory Rear Anti-Sway Bar # RM-4139-125 Rear 1 3/8 inch Diameter Bar: Roadmaster Polyurethane Bushing Kit for 1 3/8 Diameter, Factory Rear Anti-Sway Bar # RM-4139-300 We also have Replacement Split Bushing for...
  view full answer...
• Rear Anti-Sway Bar & Steering Stabilizer for 2020 Winnebago Adventurer 30T Motorhome
  For your 2020 Winnebago Adventurer 30T motorhome, the correct rear anti-sway bar and steering stabilizer will be from Roadmaster. For the rear you will need the Roadmaster Rear Anti-Sway Bar # RM-1139-146; and for the steering stabilizer you will need the Roadmaster Exact Center Steering Stabilizer # RM33RR.
  view full answer...
• 2018 Forest River FR3 32DS Anti-Sway Bar Bushings and Replacement Sway Bars
  I would be happy to help you find those parts for your 2018 Forest River FR3 Motorhome. We have 3 different OEM bushing kits depending on which size sway bar your Motorhome came with. The first is the Roadmaster Polyurethane Bushing Kit for 1-3/8" Diameter, Factory Rear Anti-Sway item # RM-4139-300. This is for the 1 3/8" OEM rear anti-sway bar. The second is the Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar item # RM88FR. This is for the 1 1/2"...
  view full answer...
• Sway Bar Bushing Kits For a 2016 Coachmen Mirada 35LS on a Ford F53 Chassis
  For your 2016 Coachmen Mirada 35LS on a Ford F53 chassis we offer 2 different rear factory sway bar bushing kits. The Kit # RM88FR will fit a factory sway bar 1-1/2" in diameter while the Kit # RM-4139-300 is for a 1-3/8" factory sway bar. Both kits include the bushings, u-clamps and hardware. We have a matching Front Kit # RM-4139-127 for a 1-5/8" factory sway bar if you wish to upgrade those as well.
  view full answer...
• Replacement Sway Bar Bushings For Factory Sway Bars On 2003 Tiffin Allegro With Ford F-53 Chassis
  You will need to confirm if you have a 1-3/8" or 1-1/2" diameter rear sway bar on your 2003 Tiffin Allegro RV motorhome with the Ford F-53 chassis. The Roadmaster Polyurethane Bushing Kit # RM-4139-300 will upgrade you to polyurethane bushings for a 1-3/8" bar while the Kit # RM-4139-125 fits the 1-1/2" sway bar. We do also have the Kit # RM-4139-127 if you would like to change the front bushings as well. Or you can upgrade the front sway bar to the Roadmaster Front Anti-Sway Bar # RM-1139-148...
  view full answer...
• Correct Replacement Polyurethane Bushing for a 2019 Ford F-53 Chassis
  The Replacement Polyurethane Bushing for Roadmaster Polyurethane Bushing Kit for Front Anti-Sway Bar # RM-205221-10 you are looking at is not going to work with your 2019 Ford F-53 chassis. These bushings are designed to be used with 1-1/4" sway bars. Instead, you're going to want to steer your attention towards the Roadmaster Split Bushing for Anti-Sway Bar # RM205222-10 which is going to work with 1-5/8" bars and can be used as a replacement part for the Roadmaster Polyurethane Bushing...
  view full answer...
• Sway Bar for a 1997 Fleetwood Bounder F-53
  For a 1997 Fleetwood Bounder you will want to use the Roadmaster Rear Anti-Sway Bar item # 1139-144. This is the kit recommended for motorhomes 34 feet long and longer. I have linked an installation video below. You will need to check to ensure there is enough factory u-bolt available to accommodate the factory nut, washer and 1/2" plate. If the u-bolts are not long enough, the item # RM-590050-00 u-bolt replacement kit is needed. You may also want to replace the bushings. You can use the...
  view full answer...
• Replacement 1-5/8" Sway Bar Bushings And U-Brackets For A 2004 Country Coach Magna
  For an 1-5/8" diameter bar on your 2004 Country Couch Magna I recommend Roadmaster Bracket for Anti-Sway Bar Split Bushings Item # RMB140 and Roadmaster Split Bushing for Anti-Sway Bar - 1-5/8" Item # RM205222-10. It is a good idea to check the other bushings as well. If any of them look worn or damaged I recommend replacing all of them with Roadmaster Polyurethane Bushing Kit for 1-5/8" Diameter, Factory Front Anti-Sway Bar Item # RM-4139-127.
  view full answer...
• Replacement Polyurethane Bushings For a 2014 Ford F-53 18,000LB GVWR Chassis
  The Replacement Split Bushing # RM-205217-10 is designed for a 1-1/2" sway bar. If you have the factory sway bar on your 2014 Ford F-53 18,000LB GVWR Chassis be sure to check the size with a Digital Caliper # PTW80157 as it looks like it came with a 1-5/8" sway bar. That would use the Roadmaster Polyurethane Bushing Kit for 1-5/8" Diameter, Factory Front Anti-Sway Bar # RM-4139-127 to replace all the factory rubber bushings.
  view full answer...
• Is There a Front Anti-Sway Bar for a 2017 Winnebago Vista 26HE with 16K GVWR
  Thank you for all of the information! Since your 2017 Winnebago Vista 26HE has a 16K GVWR the Roadmaster Polyurethane Bushing Kit # RM-4139-127 is what we have for fitment. This kit is designed for 1-5/8" diameter OEM bars and is more like an upgrade to the bushings to give you better cushioning. Aside from the front bushing kit we have the Rear Anti-Sway Bar Kit # RM-1139-146 and the Exact Center Steering Stabilizer # RM33RR, both of which are designed to give you a better ride quality...
  view full answer...
• Suspension Enhancement to Improve Ride Quality of 2017 Thor Windsport 29M
  You might begin by reviewing the acceptable range of inflation for the tires on your coach as well as examining the existing suspension to ensure it's in good shape. If that all checks out, I'd recommend going with an air ride suspension from Air Lift. An air ride system like # AL57344 for the rear axle and # AL88240 for the front axle would allow you to adjust the firmness of the ride until its perfect for your needs. An onboard dual-path compressor system like # AL25856 would allow you...
  view full answer...
• Anti-Sway and Stabilization for 1997 Thor Residency Coach
  Your 1997 Thor Residency chassis is the F-53. The F-450 chassis is found on the Class C Motorhomes but the coaches are the F-53 chassis even with the smaller wheels tucked further under as you stated. I recommend you start with the rear sway bar then the front sway and then the steering stabilizer in order of importance for the most help. The correct parts for your coach specific so you will want: -Roadmaster Rear Anti-Sway Bar # 1139-144 -Roadmaster Polyurethane Bushing Kit for 1-5/8"...
  view full answer...
• Anti-Sway Bar and Steering Stabilizer Recommendations-1997 Fleetwood Bounder on Ford F-53 Chassis
  The Roadmaster # RM-1139-143 is a fit for your Fleetwood Bounder on a Ford F53 chassis, however Roadmaster recommends going with the beefier # 139-144 for motorhomes 34 feet long and longer. You will need to check to ensure there is enough factory u-bolt available to accommodate the factory nut, washer and 1/2" plate. If the u-bolts are not long enough, the # RM-590050-00 u-bolt replacement kit is needed. For the replacement front bushings for the factory sway bar, use # RM-4139-127....
  view full answer...
• Can You Upgrade the Front Sway Bar On a 1996 Tiffin Allegro Motorhome
  The Roadmaster Polyurethane Bushing Kit for Factory Front Anti-Sway Bars part # RM-4139-127 will fit your 1996 Tiffin Allegro Motorhome on a Ford F-53 Chassis and like an upgraded front sway bar will work to improve stability. Although they do not offer an actual upgraded front sway bar for your motorhome, the bushing kit is the next best thing as it will really tighten up the what I assume are very worn out factory bushings. These new bushings are made of polyurethane which are much stiffer...
  view full answer...
• Recommended Ride Enhancement for 2018 Thor ACE 27.2
  The Roadmaster Polyurethane Bushing Kit for 1-5/8" Diameter, Factory Front Anti-Sway Bar # RM-4139-127 will be the best first step in assisting in control since the rear already has assistance. The second step would be to add a Steering Stabilizer # RM-RBK22-RSSA. These will greatly increase the handling of your Motorhome. The Suspension Enhancement # SSF-170-40-2 would be the third step. You shouldn't need to replace factory shocks after just 10K miles, so I would do this order and...
  view full answer...
• Correct SumoSprings for 2020 Mirada on Ford F-53 Chassis
  The correct SumoSprings that fit your 2020 Coachmen Mirada depends on what the GVWR is for your RV, but don't worry because we have a fit for all 2019 Ford F-53 options so you just need to choose from the list below (and/or let me know what model Mirada you have): Front Axle 16K - 22K - # SSF-170-40-2 24K - 26K - # SSF-173-40-2 Rear Axle 16K - 18K - # SSR-184-40-1 20K - 22K - # SSR-180-54-1 24K - 26K - # SSR-183-54-1 Other upgrades you can add to your Class A RV are front and rear sway...
  view full answer...

Do you have a question about this Accessories and Part?