# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Perfect Fit! Just the right length for the (75579) Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III.
This is my second purchase from eTrailer.com. Their web site is easy to navigate and you are able to order what you need even if you don't know the first thing about trailer hitches. Their deliveries are always fast and accurate as well. Our next vehicle is just about ready for towing. Thanks eTrailer.
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
This item is very well built and well finished. Installation was a snap.
etrailer.com has been my go to place for trailer parts for a very long time. Great customer service, fast shipping, and the best quality parts available. They always have exactly what I need at a super price!
# 3
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Item received in perfect condition. Thank you.
fast shipping
# 4
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
# 5
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Delivery was fast. Arrived in well packed box. Installed product with no issues at all. Works great and as advertised. Will be towing a travel trailer and needed a connection for a bike rack. When all installed, have plenty of room for placing bikes on bike rack. Really like this product!
Adapter delivered fast and installed in seconds. Fits like a glove..
# 6
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 7
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
exactly as ordered came 1 day earlier than promised
I bought a Curt trailer hitch for my 2005 Chrysler Town and Country minivan, with Stow and Go seating. I spoke with Kevin from etrailer.com who was very helpful and confirmed the part numbers for the hitch, wiring harness, and drawbar, and took my order. They arrived at my house on the next day. The parts arrived in two boxes - one large box for the hitch, the other smaller box for the wiring harness and drawbar. The parts were all there, and correct, with installation instructions included. I spent about an hour installing the hitch itself, including jacking up the rear of the van to gain access to the underside, installing the hitch, and letting the car down. The instructions were spot-on. The wiring took less than an hour. I cleaned up and waxed the area behind the tailights, and routed the wiring carefully. The wiring was a perfect fit. Again, the instructions helped considerably. The free shipping was a selling factor, plus their lowest price pledge saved me a little over $30.00. I am glad I decided to purchase the hitch and accessories from etrailer.com.
# 8
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
I bought a Curt trailer hitch for my 2005 Chrysler Town and Country minivan, with Stow and Go seating. I spoke with Kevin from etrailer.com who was very helpful and confirmed the part numbers for the hitch, wiring harness, and drawbar, and took my order. They arrived at my house on the next day. The parts arrived in two boxes - one large box for the hitch, the other smaller box for the wiring harness and drawbar. The parts were all there, and correct, with installation instructions included. I spent about an hour installing the hitch itself, including jacking up the rear of the van to gain access to the underside, installing the hitch, and letting the car down. The instructions were spot-on. The wiring took less than an hour. I cleaned up and waxed the area behind the tailights, and routed the wiring carefully. The wiring was a perfect fit. Again, the instructions helped considerably. The free shipping was a selling factor, plus their lowest price pledge saved me a little over $30.00. I am glad I decided to purchase the hitch and accessories from etrailer.com.
I ordered and received a class 2 trailer hitch, drawbar, and cap for my Town and Country. Everything was received timely. The box that contained the hitch was damaged as it was not secured well in the box and is so heavy that it slid around and punched a large hole in the side. Even the UPS driver was concerned and asked me to check that no contents fell out. Fortunately none had. Regardless, great products for a great price...trust me, I'm cheap and shop around.
# 9
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.
I had a great experience ordering from you. Your organization kept me completely up to date with the order & shipping process and delivered the exact products I ordered. Attached is a photo of the 16,000 lbs capacity hitch and 30,000 lbs 2 5/16 ball you sold me in use. The boat and trailer total about 12,000 pounds. Thanks again.
# 10
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
Part quality and fit was great. Missing pin and clip due to box being partially destroyed.
Great product. Fast shipping. Exactly what I needed. I really like all the video support.
# 11
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 12" Long - 5,000 lbs
Perfect Fit! Just the right length for the (75579) Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III.
This is my second purchase from eTrailer.com. Their web site is easy to navigate and you are able to order what you need even if you don't know the first thing about trailer hitches. Their deliveries are always fast and accurate as well. Our next vehicle is just about ready for towing. Thanks eTrailer.
# 12
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
etrailer.com has been my go to place for trailer parts for a very long time. Great customer service, fast shipping, and the best quality parts available. They always have exactly what I need at a super price!
This item is very well built and well finished. Installation was a snap.
# 13
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
etrailer.com has been my go to place for trailer parts for a very long time. Great customer service, fast shipping, and the best quality parts available. They always have exactly what I need at a super price!
This item is very well built and well finished. Installation was a snap.
# 14
Curt Class I Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 2,000 lbs
I bought a Curt trailer hitch for my 2005 Chrysler Town and Country minivan, with Stow and Go seating. I spoke with Kevin from etrailer.com who was very helpful and confirmed the part numbers for the hitch, wiring harness, and drawbar, and took my order. They arrived at my house on the next day. The parts arrived in two boxes - one large box for the hitch, the other smaller box for the wiring harness and drawbar. The parts were all there, and correct, with installation instructions included. I spent about an hour installing the hitch itself, including jacking up the rear of the van to gain access to the underside, installing the hitch, and letting the car down. The instructions were spot-on. The wiring took less than an hour. I cleaned up and waxed the area behind the tailights, and routed the wiring carefully. The wiring was a perfect fit. Again, the instructions helped considerably. The free shipping was a selling factor, plus their lowest price pledge saved me a little over $30.00. I am glad I decided to purchase the hitch and accessories from etrailer.com.
I ordered and received a class 2 trailer hitch, drawbar, and cap for my Town and Country. Everything was received timely. The box that contained the hitch was damaged as it was not secured well in the box and is so heavy that it slid around and punched a large hole in the side. Even the UPS driver was concerned and asked me to check that no contents fell out. Fortunately none had. Regardless, great products for a great price...trust me, I'm cheap and shop around.
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 16
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."