Trailer Brake Controller Specs:
Features:
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: 90195-3034-P
Trailer Brake Controller Specs:
Features:
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: 90195-3034-P
Trailer Brake Controller Specs:
Features:
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...shorts Automatic leveling lets you mount at any angle up and down for an easy installation Controller must be parallel with direction of travel and horizontally level Mounting bracket and hardware included...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: 90885-3034-P
Trailer Brake Controller Specs:
Features:
...shorts Automatic leveling lets you mount at any angle up and down for an easy installation Controller must be parallel with direction of travel and horizontally level Mounting bracket and hardware included...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: 90885-3034-P
Trailer Brake Controller Specs:
Features:
...shorts Automatic leveling lets you mount at any angle up and down for an easy installation Controller must be parallel with direction of travel and horizontally level Mounting bracket and hardware included...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Trailer Brake Controller Specs:
Features:
...is adjustable for optimal visibility Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Automatic leveling lets you mount at any angle Mounting bracket and hardware...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...is adjustable for optimal visibility Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Automatic leveling lets you mount at any angle Mounting bracket and hardware...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: TK90160-3034-P
Trailer Brake Controller Specs:
Features:
...required to swap controller between vehicles Easy installation with automatic leveling Position anywhere from -90 degrees to 90 degrees up and down Controller must be parallel with direction of travel...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: TK90160-3034-P
Trailer Brake Controller Specs:
Features:
...required to swap controller between vehicles Easy installation with automatic leveling Position anywhere from -90 degrees to 90 degrees up and down Controller must be parallel with direction of travel...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...required to swap controller between vehicles Easy installation with automatic leveling Position anywhere from -90 degrees to 90 degrees up and down Controller must be parallel with direction of travel...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
...with no mounting restrictions No need to mount level - install anywhere at any angle Included mounting bracket and hardware designed to hold brake controller flush against the dash Plug-in, vehicle-specific brake...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...with no mounting restrictions No need to mount level - install anywhere at any angle Included mounting bracket and hardware designed to hold brake controller flush against the dash Plug-in, vehicle-specific brake...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Trailer Brake Controller Specs:
Features:
...with no mounting restrictions No need to mount level - install anywhere at any angle Included mounting bracket and hardware designed to hold the brake controller flush against the dash Plug-in, vehicle-specific...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Trailer Brake Controller Specs:
Features:
...with no mounting restrictions No need to mount level - install anywhere at any angle Included mounting bracket and hardware designed to hold the brake controller flush against the dash Plug-in, vehicle-specific...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...and easy installation with no mounting restrictions No need to mount level - install anywhere at any angle Mounting bracket and hardware included Plug-in, vehicle -specific brake control adapter (sold...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: HA81760-HA81788-HBC
Trailer Brake Controller Specs:
Features:
...and easy installation with no mounting restrictions No need to mount level - install anywhere at any angle Mounting bracket and hardware included Plug-in, vehicle -specific brake control adapter (sold...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: HA81760-HA81788-HBC
Trailer Brake Controller Specs:
Features:
...and easy installation with no mounting restrictions No need to mount level - install anywhere at any angle Mounting bracket and hardware included Plug-in, vehicle -specific brake control adapter (sold...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Videos
for Trailer Brake Controller
Help Articles
for Trailer Brake Controller
Expert Answers
for Trailer Brake Controller
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota…
view full answer...I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...