Trailer Brake Controller Specs:
Features:
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.
Installation Notes:
You need item ETBC7 ($124.38) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.
Installation Notes:
Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.
If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.
Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
Get a brake controller in your truck that looks like it's supposed to be there. This sleek knob blends right into your dash and makes your settings simple and convenient to adjust.
Installation Notes:
Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.
If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.
Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
Get a brake controller in your truck that looks like it's supposed to be there. This sleek knob blends right into your dash and makes your settings simple and convenient to adjust.
Installation Notes:
You need item ETBC7 ($124.38) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.
Installation Notes:
More Information >Trailer Brake Controller Specs:
Features:
Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.
Installation Notes:
You need item ETBC7L ($95.05) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
This proportional brake controller has simple controls and a digital display for diagnostic information. Includes 3 boost levels, a slide-bar manual override, built-in battery protection, automatic leveling, and continuous diagnostics.
Installation Notes:
Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.
If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.
Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
This proportional brake controller has simple controls and a digital display for diagnostic information. Includes 3 boost levels, a slide-bar manual override, built-in battery protection, automatic leveling, and continuous diagnostics.
Installation Notes:
You need item ETBC7 ($124.38) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. Plus, it's plug-and-play, so no splicing and no permanent alteration to your vehicle.
Installation Notes:
More Information >Trailer Brake Controller Specs:
Features:
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.
Installation Notes:
More Information >Trailer Brake Controller Specs:
Features:
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.
Installation Notes:
You need item ETBC7L ($95.05) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.
Installation Notes:
More Information >Trailer Brake Controller Specs:
Features:
This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.
Installation Notes:
You need item ETBC7L ($95.05) to install your controller.
More Information >Trailer Brake Controller Specs:
Features:
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.
Installation Notes:
Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.
If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.
Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.
Installation Notes:
You need item ETBC7 ($124.38) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.
Installation Notes:
Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.
If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.
Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.
Installation Notes:
You need item ETBC7 ($124.38) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.
Installation Notes:
Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.
If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.
Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.
Installation Notes:
You need item ETBC7 ($124.38) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
This brake controller likes to keep things simple, with a thumbwheel on the front to adjust the output settings and a lever on the side for the sensitivity. The digital display is large and simple so you can read it with just a glance.
Installation Notes:
You need item ETBC7 ($124.38) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >Trailer Brake Controller Specs:
Features:
This brake controller likes to keep things simple, with a thumbwheel on the front to adjust the output settings and a lever on the side for the sensitivity. The digital display is large and simple so you can read it with just a glance.
Installation Notes:
Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.
If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.
Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.
Tech Tip:
Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.
More Information >
Filters
