Code: RED24FR-RED87FR
Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight behind the dash. Control your braking power with the turn of a dial, with manual override right at your fingertips.
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: RED24FR-RED87FR
Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight behind the dash. Control your braking power with the turn of a dial, with manual override right at your fingertips.
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C51170-C51322
Trailer Brake Controller Specs:
Features:
...Brake controller activates trailer brakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Dash...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: C51170-C51515
Trailer Brake Controller Specs:
Features:
...Brake controller activates trailer brakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Dash...
Installation Notes:
You need item ETBC7 ($129.19) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: C51170-C51322
Trailer Brake Controller Specs:
Features:
...Brake controller activates trailer brakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Dash...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: RED44FR-RED87FR
Trailer Brake Controller Specs:
Features:
...Brake controller activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle User-controlled mode...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...Brake controller activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle User-controlled mode...
Installation Notes:
You need item ETBC7 ($129.19) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: RED44FR-RED87FR
Trailer Brake Controller Specs:
Features:
...Brake controller activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle User-controlled mode...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Videos
for Trailer Brake Controller
Help Articles
for Trailer Brake Controller
Expert Answers
for Trailer Brake Controller
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to…
view full answer...I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...