The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570 will not include wet bolts. This is due to the system using slipper springs to replace the double eye springs that come on most trailers.
With the slipper springs you will only be able to use one Wet Bolt # 126B2 for each leaf spring, 4 total are needed for this kit. The wet bolts are a better option as they will keep water and rust from building up inside the leaf spring which leads to the spring... view full answer...
Although it isn't paired together in a kit, you can use the T-Fitting # 103537-MBS with the Quick-Disconnect Propane Hose # 100476-72-MBS for your application. This provides you with the quick-disconnect equivalent of the MB Sturgis Sturgi-Flow T-Fitting w/ Hose for POL Valve # 103608 that you referenced. view full answer...
We can piece together a Malone Lowbed trailer by first starting with the part # MPG464-LB and then a single bunk kit part # MPG561 and then the spare kit part # MPG465 and you'd be set. There isn't a kit with just the parts you are looking for available at this time. view full answer...
The Air Lift Air Shock Controller Compressor, part # AL25804 includes the onboard compressor; dash mounted gauge panel; hardware and air lines. An air tank isn't included. Since the compressor is manually operated from the dash panel, a pressure switch isn't included. view full answer...
The bearing part # L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the # L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs.
If you can get me more info on your trailer like axle capacity and wheel bolt pattern I can help you pick out the components you are looking for. view full answer...
The Thule T2 Pro XTR Part # TH69TX that you referenced can be either used as a 2 bike or 4 bike rack. This part number basically includes the 2 bike rack plus the expansion.
So if you needed to only carry 2 bike you would be able to remove the expansion and then when you need to carry 4 bikes you would be able to reinstall it and be ready to go. view full answer...
I reached out to my contact at Lippert and he said that the rubber inside part of the Road Armor Shock Absorbing Equalizer Kit # LC696740 is not replaceable so if it were to become damaged you would need to replace the unit. view full answer...
The Roadmaster Universal Brake Monitor # RM-9530 is just the monitor. It is designed to be used in conjunction with a braking system like the Roadmaster InvisiBrake Supplemental Braking System # RM-8700. The arm that you are seeing would be included with the braking system, not the monitor.
Depending on your vehicle, there may be some additional parts needed. If you want to provide me with your year/make/model, I would be able to tell you if there are any additional parts needed to use... view full answer...
Yes it does - the Lippert Thin Shade Complete Window Kit # LC806621 does come with the Window Release Keys (which are part # LC429436), as you can see by the cut out of the manual I added for you.
The Thin Shade Window Kit # LC806621 also comes with the inner frame, outer frame, window glass and shade. view full answer...
I went out to the warehouse to measure Camco LP Gas Control Valve w/ Quick-Connect Item # CAM57274 for you. It has an overall length of 4-5/8 inches. There is a quick connect fitting on it and the other fitting was not listed so I spoke with Camco and found that it is a 3/8 inch fitting. We do not have a 90 degree adapter fitting but I am sure you could find one locally. view full answer...
The Curt hitch part # C13152 that you referenced comes with 4 carriage bolts 1/2-13 x 4 1/2, 4 flange nuts HFN 1213, GR8, 4 hex bolts M10 - 1.25 x 25 and four 3/8 inch conical toothed washers. Plus a 11GA. (.1196) SPACER PLATE.
We sell the replacement hardware for this hitch (and all of the hitches we carry) as part # RHK. view full answer...
You'll need to use a circuit tester like # PTW2992 and test each pin on your 7-way as its function is activated. The pin in the 3:00 position should light up when the right turn signal and when the brake pedal is activated. The pin in the 9:00 position should light up with the left turn signal and brake pedal.
I'm guessing when you test, you're not going to get brake signal at those two pins which means that the signal you're getting is unconverted.
To fix things, you'll need to install... view full answer...
The Thule Replacement Track Nut Kit, part # 853-5147, consists of a single track nut. The replacement 17 millimeter bolt, part # 924-0617-15, and washer, part # 951061254, are sold separately and also as single pieces. view full answer...
The Thule EasyFold XT 2-Bike Rack # TH903202 does include a ramp, which is one of its (many) appeals, as the ramp makes it much, much easier to load bikes onto the carrier.
The ramp is 36 inches so it will definitely be long enough for the height of your 2014 Chevy Suburban. When you get the rack, if you feel like the angle of the ramp is too much and you want the angle to be flatter you can always get the 53 inch Extra-Long Loading Ramp for Thule EasyFold XT # TH933402.
I have added... view full answer...
The Thule OutWay - 2 Bike Carrier # TH45JV comes with two keys for the integrated locks. I went ahead and attached a screenshot from the instruction manual that shows all the components.
The reason why the Thule One-Key System Lock Cylinders # TH450400 appear as an additional accessory is because other Thule accessories (crossbars, towers, roof racks, snow equipment racks, cargo boxes) have the option for using the cylinders as extra security measures. view full answer...
I can see how either way would "in theory" work well, but what we've gotten from our weight distribution manufacturers is that you let it auto level first and then set the system up so that the WD's spring bar tension is accurate for how the vehicle's suspension configuration and not be too severe.
Otherwise if you do the auto-level after the WD system you may end up with the WD and the air system working against each other. view full answer...
The Annex for 2 Person Yakima SkyRise Tents # Y07421 is just the enclosure that you see pictured beneath the Yakima SkyRise tent in the attached review video. This is a fit for the (discontinued) SkyRise Y07407 (Red) or SkyRise HD # Y07436 (Tan and Red).
The SkyRise tents are compatible with your Crosstrek but you will need to use a different roof rack if the one you currently are using is the OEM roof rack according to Yakima. Roof rack systems where the crossbars end inside the legs... view full answer...
Tires that are sold alone, not pre-mounted on a rim/wheel, do not include valve stems but we do offer these as separate items. Tires that are pre-mounted and sold with a rim/wheel do of course include the valves.
I have linked you to the various parts available, which include both metal and rubber types and in various psi ratings, such as # AM20906. view full answer...
When a snow tire chain says it comes in a pair, such as the # PWE2241SC that means it comes in a quantity of two chains. I have added a link for you with a video review of these chains for you to take a look at as well. view full answer...
Hardware is included with the seat adapter, # RM-88150. If you are talking about the mounting post, that is part of the BrakeMaster assembly. If you are missing that part there is a kit you can use, # RM-450596. The pin that holds the post to the BrakeMaster is # RM-356997-00. view full answer...
Go To Results