The Replacement RF Controller for Blue Ox Patriot II or Patriot 3 Supplemental Braking System part # BLU66CR does not come with the rubber dash mount. If you need this, I recommend reaching out to Blue Ox directly. That said, you could also just use some hook and loop fasteners on the back of the controller and the dash. view full answer...
Yes, we do carry a 3-crossbar version of the Thule TracRac TracVan ES Van Ladder Rack # TH29613XT. For the 3-bar version, that is the Thule TracRac TracVan Van Ladder Rack # TH29056XT.
In order to confirm the fitment of the TracVan ladder rack, I would be happy to provide you the confirmation if you provide the year/make/model of your vehicle. view full answer...
The Lippert Patio Upgrade Kit # LC27FR is a replacement rear ramp door that is capable of supporting itself in a patio orientation. Not all doors that come on toy haulers are capable of acting as a patio due to the structure inside the door. This door will replace an existing 94" wide by 94" tall existing ramp door. It has all the springs and hinges attached.
You will need the Lippert Garage Door Cable for Toy Hauler Patio Doors # LC39FR to hold the door in the patio position. view full answer...
The photo on the RHK product page is a typical photo, and doesn't represent the actual replacement hardware you'll receive for the Curt # 13333. There are hundreds upon hundreds of unique hitch fits, and it wouldn't be practical to get photos of each and every hardware kit for them. When you order a RHK for a given hitch, it'll consist of all the hardware that would have been included with the original hitch. If you look at the photo, you can see the exact hardware provided with the replacement... view full answer...
The Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover # TX2469-CVR is just the tarp and would require all of the original hardware and crossmembers in order to be installed. view full answer...
I checked with the manufacturer on this and they were able to tell me that the Advent Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners - White # ACRG15 uses the following hardware:
- 6 qty #8 X 5/8" Phillips Pan head tapping screw
- 4 qty 1/4-20 X 7" serrated flange head bolt
- 2 screw covers view full answer...
Yes, we have both the Firestone Elbow Connector for 1/4" Tubing # F3031-1 and the Firestone Inflation Valve for 1/4" Tubing # F3032-1 should you need to replace that as well. Both of these fittings are used in the Firestone 2560. view full answer...
The puck inserts do not come with the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems - 5" Offset # GY83XR.
You can get those though with the Safety Chain Loops # C60617. view full answer...
Yes. All Solera awning fabric replacements like the # LCV000334341 come with the spot for a poly cord to be installed the length of the awning, which allows you to slide the light strip holder on and install your LED lights. You will want to save the poly cord and the plastic mounting strip to install on the new fabric since those parts are not included. view full answer...
The picture that the Firestone Automatic, Single-Gauge Pneumatic Height-Control Valve w/ Compressor # F2186-2047 has on it's product page is a typical photo that is basically a generic representation of a compressor kit and not what you'd actually get if you ordered this.
The kit comes with a single Tee valve that allows you to control the pressure of both bags equally with one inflation valve. view full answer...
The Access Custom Truck Bed Mat # A25040239 unfortunately doesn't have a matching tailgate rug but the BedRug Impact Truck Bed Liner # BR79FR (5-1/2' bed) or # BR29VR (6-1/2' bed) both come with full bed and tailgate protection. This 3/4" thick cover will cushion and protect your bed from hard impact and provide an anti-skid surface to help keep the items you're hauling from sliding around.
I've attached a short video below where Evangeline will walk you through the features of this cover.
If... view full answer...
The Valterra RV Waste Valve, part # T50A, consists of both the 3-inch valve spigot and the 3-inch bayonet outer cap. You can see this item in the linked review video. view full answer...
The Dexter # 8-219-18UC3 7K trailer hub you mentioned includes cone style nuts like # 6-109, which help to center a lug centric wheel on the hub. The bearings, races, grease seals and grease caps are included as well. view full answer...
The mounting bolts are indeed included with the Replacement Head Unit for Curt A25 5th Wheel Trailer Hitch # C16580.
I have added a photo of the # C16580 for you which shows the included mounting bolts. view full answer...
The Demco coupler # DM16680-52 you were looking at does not include the hardware needed for installation. It would be a good idea to switch over from your weld on to a bolt on coupler, this will make it a whole lot easier to replace over time as it wears out as you have stated. view full answer...
Since your 2017 Ram 3500 has an 8' bed the BAKFlip MX4 Hard Tonneau Cover # BAK48204 will be a quad-fold. Trucks that have a bed over 6' long will be quad-fold while trucks that have a bed under 6' long will be a tri-fold. I've sent an update to have the tri-fold part of our page corrected.
The part 448204 is the BAK part number while 48204 is the exact same thing on our end, we just add the BAK letters in front of it for our labeling.
Attached is a review video for you to check out. view full answer...
The Demco Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th Wheel Hitches part # DM8552030-71 can be purchased without the rails with just the Demco Premier Series Custom Mounting Brackets for 5th Wheel Above-Bed Base Rails part # DM8552030. view full answer...
I have a solution for you. The Thule WingBar Evo Crossbars - Aluminum - Black - 60" Long - Qty 2 # TH711520 only comes with the crossbars themselves without the required foot pack and fit kit for your 2014 Dodge Ram 1500.
If you want a complete roof rack system, the WingBar Evo system is only available for crew cab and quad cab models. If you have a crew cab or quad cab, you will need the following parts in addition to the WingBar Evo Crossbars:
- Evo Clamp Feet for Thule Crossbars... view full answer...
The B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000 lbs # BWRVK3600 weighs 219 lbs with shipping materials and 213 lbs when unboxed and ready for use. This can be installed in two parts with the base weighing 138 lbs and the head weighing 75 lbs. view full answer...
Go To Results