Yes, the part you're looking for is # TH94JV. This will replace 1 of your original Fast Grip clamps on your Thule Pulse, part # TH613, # TH614, or # TH615 rooftop cargo box.
If you also need the Replacement Easy-Grip Sealing Strip, it's also available as part # TH1001071500. view full answer...
I spoke with my contact at Thule who said that the only thing that was able to adapter your Thule Cascade roof box to aero style bars was the XADAPT10 adapter kit but that has been discontinued for quite awhile.
At this point in time you either need to replace your cargo box or see if there are any places that carry the older XAPAT10 kit for you to use. view full answer...
Thank you for the information and the photos! According to what you sent in it looks like you have one of the discontinued Thule Flat Top (TH91724 or TH91725) or Pull Top (TH91726) carriers.
These came with universal mounting hardware as well as an adapter for the square bars which it sounds like that's what you were using. You can try upgrading the mounting to the Replacement 20 mm SpeedLink # 7521241002 but you may need to modify the carrier since this mounting kit wasn't designed for... view full answer...
It depends on your bike mount and brand. Yakima has their Universal Mighty Mounts # Y03590 that should help with most of your Yakima carriers.
Thule has their Xadapt series: # Xadapt1 and # Xadapt2 for crossbars that have a t-track in them. If not, they have this old Ride-On Adapter that is now only available in its individual parts:
4 of the # 915-0625-54
4 of the # 853-2154
4 of the # 853-2156
4 of the # 853-5267
4 of the # 753-2854
4 of the # 936060054
4 of the # 853-5269
8 of the... view full answer...
The adapter to change from a square bar to an aero bar on the High Roller is the Mighty Mount 39H Accessory Adapter part # Y03539. This will fit the original bolt and allow you to attach to your roof rack. view full answer...
The Spare Tire with 5 Spoke Rim for Yakima Rack and Roll Trailer # Y08121 has
wheel dimensions of 16" diameter x 1.85" wide and tire dimensions of 16" diameter x 3.25" wide. This is the tire # Y8880282 you referenced with inner tube # Y8880283.
I believe this is the newer wheel option for the same trailer fit. If you measure your wheel and tire you will be able to determine if it is the correct fit or if you need to replace the wheel as well. For complete replacement you can use the... view full answer...
There is indeed a suitable replacement.
The Fulton 1588S00 was replaced by the # F501115 which we carry. They are sold in a quantity of 2. view full answer...
For the Thule Evo roof rack crossbars we have the top t-track strip part # 1500052989 and the lower rubber strip part # TH79VW as well. view full answer...
I checked with Yakima and to mount your existing JayHook Kayak Carrier to the aero-style crossbars on your Subaru Outback you just need the HullRaiser Conversion Kit # Y8860031 and Plug Kit # Y8890058. This will replace the original mounting hardware on the carrier with top and bottom brackets that secure to the factory bars on your Outback.
Your JayHook model is what replaced the HullRaiser, which is why this is the correct kit. view full answer...
The Repair Kit for Fulton Channel Tongue Coupler with Hand Wheel Latch, 2" to 2-1/8" Ball # F520801 is the only kit available for that hand wheel repair. You will need to get the entire kit as the spring and latch are not available separately. view full answer...
Thanks for the photo. To get that t-bolt, you may want the Yakima HullRaiser to HullRaiser Aero Conversion Kit # Y8860031 or the Replacement T-Bolts for Yakima ShowBoat, Aero Bar, or Universal Mount Roof-Rack Accessories # 8860061. Unfortunately there isn't a specific replacement for your older box. view full answer...
You will need the Replacement Rear Mount Assembly # TH55RH for your Subaru Thule Circuit XT bike rack. This is the correct replacement part according to Thule for the Subaru SOA567B011 bike rack.
The Replacement Around the Bar Bracket # 1500052940 is specific to the ProRide XT and UpRide bike racks. view full answer...
For your 2010 Subaru factory crossbar, you can upgrade your Sidearm Mounting hardware to fit that rear rail. The front rail should work with the current hardware, but the upgraded hardware should work with both bars if that is what you are mentioning. Unfortunately even the newer model of the Sidearm you are referring to is discontinued so the other parts are not available.
If the rear hardware works for the front even though it is long, it may be the best option. You will need two... view full answer...
Yes, the MaxxAir TuffMaxx Replacement RV Air Conditioner Cover # MA00-325001 will fit your Coleman Mach 8633-876 A/C. The 8633-876 is a Coleman Mach 3 and the # MA00-325001 is confirmed to fit the Coleman Mach 3 Models. view full answer...
The Replacement Mounting Bracket for Yakima SlimShady Roll-Out Awning part # 8880736 is designed specifically for the Yakima SlimShady roll-out awning part # Y36VR. If you have the manufacturer and model information off of your awning I can help to find the part you need. view full answer...
It sounds like you have the QM3 Quick Mount Hardware part # TH04997 on your Thule Excursion Cargo Box TH667 and if that is the case I have attached the parts I believe you are looking for below:
Replacement Quick On/Off Bracket part # TH04973
Carriage Bolt M6-1 x 75mm part # TH10403
If this is not what you need please just let me know. view full answer...
The correct replacement leaf springs for a Malone MicroSport Trailer part # MPG460G are the 2-Leaf Slipper Springs part # e36SR. These will be a direct fit replacement for the old springs. They are slipper springs with a 500 lb weight capacity that measure 24-5/8" long. That said, if you want to upgrade to a higher capacity, the 4-Leaf Slipper Springs part # e69SR are a fit as well. view full answer...
Since Thule and SportRack are sister companies many of their replacement parts kits for cargo boxes like your 20+ year old Thule 250 will work with their other products. It may be necessary on occasion to maybe drill a new hole in the box to accommodate the new hardware but this is easy to do, does not compromise the box in any way and any extra holes can be easily sealed up with a product like Loctite RTV # LT37467 or silicone caulk available from your local hardware store.
Thule no longer... view full answer...
Go To Results