I will be happy to walk you through what you will need to add a roof rack and kayak carrier to 2018 Mitsubishi Outlander Sport in the budget you mentioned.
You said there are places to install a rack system, but I am unsure if that meant your '18 Outlander Sport had a naked roof (meaning no rails of any kind on the roof already) or a roof with factory flush-mounted rails that run front to back so I'll give you options for both.
Rhino Rack is a high-quality roof rack manufacturer and they... view full answer...
the cargo mat # WT40360 for the 2008 Mitsubishi Outlander is designed to fit just the cargo area of the vehicle not including the area with the seat folded down.
For a cargo mat that will fit from the 2nd row back (fits over 3rd row when folded down) we have the Covercraft area mat # CC76207625. view full answer...
Thank you for the photo of your older Yakima hitch bike rack for which you want to confirm the fit of replacement shank/tongue assembly # 8880580.
Yakima confirmed the fit of this part on your rack. You may also need Hitch Bolt # 8890200 to secure the shank to your hitch.
I also went to our warehouse and took a number of measurements that should give you what you need to verify that this part will work on your rack. The linked photo indicates the hole diameters, hole spacing and inside... view full answer...
The correct trailer hitch for a 2019 Mitsubishi Outlander PHEV SEL is the Curt Trailer Hitch Receiver part # C13398 which is a direct bolt-on fit. The Curt hitch also has a hidden design so only the receiver tube will be present once installed which makes for the best install look. view full answer...
That is correct. In our roof rack fit guide for your 2019 Mitsubishi Outlander you will choose the category "with no existing rails or crossbars" which I've linked for you to filter through.
I recommend checking out one of the Rhino-Rack aero-style roof rack system. We have the ROC25 which has more of an OEM look as well as the Vortex crossbar system which has the overhang past each leg. Below is a list of the parts you'll need for either setup:
ROC25
Kit - # RR65GR
Vortex Aero
54" Crossbars... view full answer...
For your 2023 Mitsubishi Outlander PHEV you will need the Curt Trailer Hitch Receiver # C86FV. This has a different mounting bracket on the passenger side of the frame than the Receiver # C87WR you found which does not fit the PHEV.
I recommend installing the T-One Vehicle Wiring Harness # TK46VR when you install the receiver. This will give you a 4-way flat connector for connecting to most small trailers you might pull as well as Auxiliary Lights # C53201. The auxiliary lights are needed... view full answer...
Yes, the Curt Trailer Hitch Receiver 13566 # C86FV and the T-One Vehicle Wiring Harness # TK46VR are the correct parts to fit your 2023 Mitsubishi Outlander PHEV. I have linked the installation instructions for both of these below if this is something you wish to install yourself. view full answer...
I do have a trailer hitch for your 1990 Mitsubishi Montero, but I spoke with my contact at Curt and he confirmed that the Curt Class III Trailer Hitch, # 13091, was designed to fit only the 1992 to 2000 Mitsubishi Montero except the sport model.
The recommended trailer hitch for your 1990 Montero is the Curt Class II Trailer Hitch, # C12181. Both trailer hitches have the same bolt pattern, but the difference is the distance between the top of the trailer hitch receiver and the bolt holes... view full answer...
I believe you are referring to the top rubber cover of your Thule AeroBlade crossbars and for that we the Replacement Cover Strip with Pattern for Thule AeroBlade Edge Cross Bars - 59" Long # TH69JH.
These fit the 7501, 7501B, 7502, 7502B, 7503, 7503B, 7504, 7504B, 7601, 7601B, 7602, 7602B, 7603, 7603B, 7604, and 7604B crossbars. view full answer...
I do have an option for you but there is really no reason to use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236 on a 2022 Mitsubishi Outlander as there is a custom kit available, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C43WR. The custom kit simply plugs in so there is no splice or warranty issues to worry about.
That said, the connections that come with the universal harness can be sourced locally, you'd... view full answer...
According to the owner's manual for your 2015 Mitsubishi Mirage, the vehicle cannot be flat-towed. Instead, you will want to use either a trailer or tow dolly. Using a tow dolly will usually be the most cost effective way to tow a vehicle. It will also require far less modifications to the vehicle if any in addition to providing the least amount of stress.
For a tow dolly that will work well for you, I recommend using the Roadmaster Tow Dolly part # RM-2050-1. The Roadmaster Tow Dolly... view full answer...
As the 2023 Mitsubishi Outlander is unchanged from the 2022 you will be able to use the Curt Trailer Hitch Receiver # C87WR.
The T-One Vehicle Wiring Harness # TK46VR will provide you a 4-way flat connector. This is the wiring commonly used on most small trailers. It can also be used for Auxiliary Lights # C53201 in the event your hitch mounted accessory impairs the view of your tail lights. view full answer...
The only wiring that we know will work with your 2023 Mitsubishi Outlander PHEV at this point in time is the Curt Upgraded Circuit Protected Powered Tail Light Converter # C59496 and the ZCI Wiring Kit # 119250KIT.
The Curt wiring splices into your factory wiring while the ZCI uses clamps to sense when to send power back to the trailer lights. Both wiring kits are designed to be used with 12V power so that's what you'll need to connect the black wire to on your Outlander. view full answer...
Yes, we do ship to Canada but the quoted shipping costs does not include all brokerage fees and duties. The correct hitch we have for your 2003 Mitsubishi Montero excluding Sport that I recommend for a boat trailer is the Curt Trailer Hitch Receiver part # C13800 which has a Class III rating with a 2" receiver tube opening. There will be no drilling required and the hitch has a black powder coat so you should not have any issues with rust while launching into salt water.
Unfortunately,... view full answer...
Yes. the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11449 is the correct fit for your 2018 Mitsubishi Mirage G4. I've attached a photo for reference, but this hitch is confirmed to fit 2017 to 2019 Mirage G4 models. If you will be using the hitch for a bike rack or other accessory, use of the stabilization strap # 18050 is required so you don't void the manufacturer warranty.
Class I hitches will limit you to Class I rated bike racks, so I have also linked a page... view full answer...
To install 7-way trailer wiring on your 2019 Mitsubishi Outlander you'd need the part # C59496 that you referenced as well the part # ETBC7 which comes everything needed to convert it to a 7-way plus everything needed to install a brake controller and have the 12 volt accessory circuit active as well. This also gives a 4-way you can use as well. It gives option to have reverse light circuit wired in too in the future if you'd like also.
Then for a brake controller the part # TK63VR would... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13163 excludes the PHEV. However, there is a 2018 Mitsubishi Outlander PHEV fit and it is # C13398. This will work well for bike racks and other accessories.
If you will be towing, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT that will not require any splicing into your vehicle wiring. The zero contact interface sensors will work well to... view full answer...
Your current wheel and tire size has an overall diameter of 18.1 inches. The size you are looking at, 5.30-12, has a diameter of 21.9 inches. If you have the room for the additional tire size and you get the correct wheel bolt pattern then what you are looking to do should work well.
The taller tire should smooth out the ride a bit.
The Kenda 5.30-12 Wheel and Tire # AM30700 that you referenced has a bolt pattern of 4 on 4. If you are unsure of the bolt pattern of your current wheels... view full answer...
The Curt Trailer Hitch Receiver # C87WR will fit all trim levels of the 2022 Mitsubishi Outlander. Since The Outlander Sport and Outlander PHEV are different models this receiver will not work on those vehicles.
The Curt Trailer Hitch Receiver # C13398 is the last hitch we have confirmed to fit the Outlander PHEV and it fits the 2018-2020 model years.
The Curt Trailer Hitch Receiver # C13079 is the last hitch we have confirmed to fit the Outlander Sport. It fits the 2011-2021 model years. view full answer...
The thing with tow bars is that they are not vehicle specific but rather base plate specific. For instance, the Blue Ox Acclaim Non-Binding Tow Bar - Car Mount # BX4330 you were looking at work with any 2" ball, as well as any Blue Ox base plates that are spaced between 23" and 30" apart on center.
This base plate can be adapter to fit Roadmaster cross-bar style base plates with the RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter # RM-033.
While the tow bar you were looking... view full answer...
Go To Results