Hi Mike!
The Curt # C11372 hitch you found will actually fit both the 2011 Lexus IS 250 and the IS 350, which makes it easier. However, it should be noted that this is a Class 1 hitch and has 200 pounds of tongue weight.
Do you already have the carrier/rack? view full answer...
For your 2014 Lexus IS 250 I recommend a roof rack system with aero bars because it will be the most aerodynamic, produce less noise, and will look the best on your vehicle.
Rhino-Rack system # RR96QR is a great option. This system has bars that do not overlap the feet so the system looks more like a factory roof rack. The only drawback is that there is less bar space to mount accessories so depending on how wide your cargo box is you may or may not be able to also fit a bike next to the... view full answer...
I have a great bike rack solution for you. For transporting a 56-pound e-bike on your 2011 Lexus IS 250c (convertible), you will be able to use a bike rack. However, unfortunately, given the specs on how our available Curt Hitch - 1-1/4" # C11047 installs, the 5-3/4" of shank length of the Swagman Current # S64678 is not long enough to clear the rear bumper. Also, even if the shank was long enough, the Current is only rated for Class II 1-1/4 inch hitches. The # C11047 is a Class I hitch... view full answer...
I recommend the Draw-Tite trailer hitch receiver, part # 24923, for your 2015 Lexus IS 250. It's confirmed to fit both the sedan or convertible models. The hitch is a Class I, 1-1/4 inch receiver so you need to make sure the bike rack you use fits the Class I.
The bike rack I recommend is the very popular Thule T2 Pro XTR, part # TH23JV. The T2 is a platfrom rack that carries up to 2 bikes at 50 pounds each. it can be folded up out of the way when you're not using it as well as tilted... view full answer...
The Curt hitch # C11389, # C113891, and # C113893 are all fits for your 2015 Lexus IS 250. The difference is what comes which each part number. They all come with the hitch, but part # C113891 comes with a Euro style ball mount and the # C113893 comes with a standard style ball mount. view full answer...
I spoke with my contact at ThermaHeat regarding the Heater Pad # 277-000163 that you referenced. He did state that they don't really recommend insulating the pad with foam like what you are describing, as this can potentially affect its function and may interfere with the surrounding wiring as well. The pads are designed to attach directly to the tank.
I have attached a short video demonstration on the heater pad that you can also check out. view full answer...
I spoke with my contact at Curt and he said the Curt trailer hitch # C11389, which you reference, is a confirmed fit for your 2014 Lexus IS 250. The hitch will not interfere with the factory exhaust, however the exhaust must be temporarily lowered for installation. In order to know if the hitch will interfere with your aftermarket exhaust, I will need to know what kind of aftermarket exhaust you have.
I have attached a photo of Curt trailer hitch # C11389 installed on a 2014 Lexus IS 250... view full answer...
You'll definitely want to buy the hitch before you get your trailer. For your 2006 Lexus IS250 you will want the Curt Trailer Hitch item # C11372. This hitch is custom fit and bolts to your Lexus with included hardware. This is the highest capacity hitch available for the IS 250 and the only option.
The Curt Trailer Hitch item # C11372 is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
I have linked an installation video... view full answer...
The Kuat NV 2.0 Base 2-Bike Platform Rack part # BA12B weighs 49 lbs. The weight of this rack and the weight of your bikes cannot exceed the tongue weight capacity of the vehicle. For example, if the bikes weigh 57 lbs each then your total tongue weight is 163 lbs. The tongue weight capacity of class I hitch is 200 lbs so as long as the vehicle is not rated lower, you'll be good to go.
Please note, the Kuat NV 2.0 Base 2-Bike Platform Rack is a wheel mount rack so it's not compatible... view full answer...
According to Curt the # C11372 is the correct fit hitch for the 2011 Lexus IS250 all Sedans non-convertible. This Curt hitch fits Lexus IS250 models from 2006 to 2013.
If you have the convertible model, then the Curt hitch # C11047 is the confirmed fit.
The difference between the two hitches has to do with the width of the mounting arms of the hitch. The convertible model is a different length when mounting under the car to allow for the convertible top to retract in to the truck area... view full answer...
I can help answer the questions you have about the Saris Bones 3 # SA801BL.
You are correct that the plastic ratcheting cradles will make attaching the bike to the rack easier than the rubber straps. Typically the rubber will stretch easier in warmer climates and loosen up after repeated use. You are also correct that because they are plastic they have a higher chance of breaking especially in colder weather conditions. We haven't heard of any cases of the buckle breaking or coming... view full answer...
I do have some bike rack options that will allow you to carry a 45 lb bike. Unfortunately the vast majority of hanging style bike racks (which tend to be lighter than platform style) cannot support the weight of a 45 lb bike.
Saris has their Freedom # SA4412B 2 bike platform rack which is only 22.5 lbs and can support two 60 lb bikes. Since this is a platform style rack, I believe that it is a good lightweight alternative to the Beta. The only problem with this one that I foresee, yet... view full answer...
The Curt # C11389 is a fit for all sedan models of the 2014 Lexus IS250, including the F-Sport.
If you'll be using the hitch for light duty towing, you'll also need a trailer wiring harness like # C56142, a ball mount and hitch pin like # C45521 and # PC2 and a trailer ball like # A-80 for a 1-7/8 or # A-82 for a 2 inch ball.
You can see the parts mentioned above by using the provided links. view full answer...
Class I hitches can't be used with Yakima bike racks as they only fit Class II and up hitches. Also Class I hitches can only carry up to two bikes at a time as any more than that puts too much weight and leverage on the hitch which will potentially damage it.
So with the Curt hitch part # C11389 that you have you'd need to go with a 2 bike rack that is Class I compatible.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 Bike Rack part... view full answer...
The instructions I found for the Thule Roof-Rack Fit Kit for Traverse Foot Pack # THKIT1426 said to use the sliding dial number 30 on the front bar and that there should be 37-1/2 inches between the Traverse foot pads when installed correctly.
Try that and let me know how it fits. view full answer...
The Curt # C11047 is the correct hitch for your 2012 Lexus 250C. Most mechanics are able to install a hitch receiver so you might check around local shops to find what they will charge.
The hitch is a Class I so you'll need a bike rack to fit. The Thule Helium Pro # TH9042PRO will fit and there's no need to have any additional holes drilled because it includes locks to secure the rack to the hitch receiver. There's also a lock to secure the bike to the rack. view full answer...
The one hitch we offer for your 2008 Lexus IS 250 sedan is a light-duty Class I type, part # C11372 from Curt. This hitch, like all Class I hitches, does have a maximum tongue weight rating of 200-lbs. Even without the weight of your chosen motorcycle carrier the 234-lb bike itself is already over the hitch's capacity. Since there are no other hitches for your car that offer a higher weight capacity you'll want to use a small utility trailer to transport the dirt bike. You can often find... view full answer...
I can tell you how to figure out how far under the rear bumper the hitch opening will be when you install the Curt Hitch # C11047 on your 2011 Lexus IS 250C, but I don't have the exact number you need.
From the install holes of this hitch that are closest to the rear of the vehicle to the hitch opening this hitch measures exactly 5 inches. If you find those holes on your vehicle and then measure 5 inches towards the back of the vehicle you will know exactly where the hitch will end up.... view full answer...
I spoke with my contact at Curt and he said that they have never test fit their hitch part # C11389 on the F Sport version of the 2014 Lexus IS 250, but we did have a customer come back and send us a close-up picture of the hitch installed on a 2015 F-Sport that I did attach for you to check out. So it looks like it will fit. view full answer...
Go To Results