Recommend Hitch for a 2006 Lexus IS 250

Updated 05/04/2023 | Published 05/03/2023

Products Featured in This Question

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2289)

$47.75

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2634)

$17.00

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

(2337)

$41.91

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(48)

$433.82

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

(1877)

$87.94

Question:

Hi. I have a Trailer Reciver Hitch Class I. Should I buy this Curt? It will fit?? And one final question: This is the only Curt size avilable? Or there mores?? Because I wanna buy a Trailer, and I dont know if I should buy the curt first and them the trailer. It will all work?

asked by: Eduardo

Expert Reply:

You'll definitely want to buy the hitch before you get your trailer. For your 2006 Lexus IS250 you will want the Curt Trailer Hitch item # C11372. This hitch is custom fit and bolts to your Lexus with included hardware. This is the highest capacity hitch available for the IS 250 and the only option.

The Curt Trailer Hitch item # C11372 is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.

I have linked an installation video below.

Since you are planning on towing you will also need a wiring harness item # C59236 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.