2017 Chevrolet Colorado Side Window Vents

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Adam, yes the B and W hitch part #BW47BR that you referenced is a confirmed fit for your 2025 Toyota RAV4 plug in hybrid. What are you planning on using the hitch for?

Hey Randy! For the OEM prep package you'll need to reach out to a Ram dealer, but I can help you out with an underbed system for your 2026 Ram 2500 if you aren't dead-set on getting the exact same as the OEM. The closest we have for your…

Hi Tom! I included a link to the instructions for the B&W Trailer Hitch Receiver - Custom Fit - Class III - 2" #BW47BR that will fit your 2024 Toyota RAV4 Hybrid. We haven't installed one of these in house quite yet, so no install video,…

Hey Keith, yes the Reese Ford puck adapter part #RP30156 that you referenced is what you would need. This fits the OEM pucks of your 2019 Ford F-450 and also provides the type of rails that your Pullrite ISR hitch is designed to fit so it work…

Hello David, thanks for reaching out. Yes, the Timbren Suspension Enhancement System - Rear Axle #TFR350SDJ will indeed fit the 2026 Ford F350 4x4. Both our site and the Timbren site confirm this. It looks like you were looking at the #TFR250SDJ…

Hello Derick, thanks for reaching out. The only way to know if the Curt Helux Shock-Absorbing 5th Wheel Pin Box #C73RJ will work for you is to determine what pin box you have currently. The best way to do this is to find the sticker on the pin box…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hi Duane; the AeroTread Running Boards #AA2061031 fit the 2025 Durango if you do not have OE side skirts. I believe the R/T comes with the side skirts so they would not fit. For running boards that will fit with the side skirts I recommend the Aries…

Good question! Can you close the hatch of the vehicle the CVT Timber Creek Annex #RG35ZV is attached to? Yes. However, it should be noted that the hatch is actually acting as a roof support, so some of the roof will not necessarily cave in, but it…

It definitely will Michael. The Reese Elite Series Underbed Rail Adapter item #RP30156 is going to drop right down into your F-350's factory puck system and provide you with a base equivalent to a set of industry standard 5th wheel rails.…

You can use the QM3 mounting hardware #TH04997 for the Weekender rooftop cargo box. This will use the carriage bolts as you stated and will fit 4 inch on center holes. I've attached some photos and a video to assist.