Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The Continuum is so quiet, you might forget its there. This system works with your standard coupler and a 2-1/2" hitch, plus it has a 4" extended shank for extra clearance when hooking up.
When your tongue weight is perfectly balanced, you can achieve sway control without the need for additional sway bars or noisy, friction-inducing brackets. The Continuum allows you to do just that. The single-piece load bar assembly on this system is designed to transfer weight off of the coupling point and evenly disperse it over the axles of your truck and trailer instead.
Other weight distribution systems require a ton of manual adjustment to get the weight balanced. You might have to switch out chain links or play around with the height of frame brackets to get the right tension on the spring bars. The tilt of the system head might need to be adjusted too to get the load distributed. But even with those adjustments, it can be almost impossible to fine-tune the system enough to get your tongue weight perfectly balanced.
The Continuum replaces manual adjustments with hydraulic pressure, making weight distribution effortless. Just pump the handle on the drivers side - no need to walk around snapping up spring bars. Plus, you can fine-tune tension quickly for a perfectly balanced ride.
Hooking up your trailer shouldn't feel like solving a puzzle. If you've ever struggled to drop your tailgate without it hitting the hitch or squeezed past a spare tire just to hook up, you'll appreciate the extra clearance an extended shank provides. By positioning the hitch head further from your vehicle, it helps prevent frustrating interference with tailgates, spare tires, and trailer-mounted accessories. That means easier access, smoother hookups, and less hassle when getting ready to hit the road. Whether you're loading gear in the truck bed or making last-minute adjustments, you'll have the space you need to work comfortably.
When you first install the Continuum, it might take a bit of time to get the load bar assembly, hydraulic cylinder, and hydraulic pump mounted on your trailer. But once everything is in place, setting up the system each time you tow is a snap.
The hitch head - which mounts in your vehicle's receiver and provides the attachment point for the Continuum - features a preset angle, so the only adjustment you might need to make is to move the head up or down along the shank. Unlike other weight distribution systems, you won't need to change out any hard-to-reach washers or read - just the tension on spring bars to get set up. The head also has friction sway control built in to help hold your trailer in line at the coupling point.
Instead of rigid steel spring bars that have to be manually snapped into place, the Continuum has a composite load bar assembly that raises with a pump of a handle. This assembly uses a flexible composite material called LiteFlex, which is strong enough to handle heavy loads, yet flexible enough to ensure that you won't have a rough, rigid ride at lower tongue weights. Because of this, the Continuum can handle anything from a small enclosed trailer to a large camper, allowing the system to grow with you.
Once you get your trailer hooked up and you're ready to transfer your load, just pump the handle on the hydraulic unit. This will raise the rear of the load bar assembly to distribute your tongue weight.
The knob on the side of the hydraulic unit allows you to back off some of the pressure you pump in so you can dial in just the right amount to get your towing setup balanced. Take note of the psi reading on the built-in pressure gauge once you're done and record it in the included log for the next time you tow.
If you start to experience a bumpy ride while towing with the Continuum, it might be a sign that you've moved too much weight off of the connection point. Fixing this is simple: find a place to park and turn the built-in adjustment knob on the pump unit to release some pressure.
The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.
Ratings & Reviews

Gwendolyn Y.
5/16/2025
I'm so happy this unit helped you so much, Kate! White knuckling is never fun at all and while sometimes it's nice to avoid the highways it can add a lot more time to your travels. It sounds like you are not enjoying the journey when you are headed off to your next destination! Also, I love your video that you shared! Safe travels, Kate!

Gwendolyn Y.
5/20/2026
Have a safe and great Memorial weekend trip, Greg! Can't wait to hear about how it goes.

Jameson C.
9/21/2026
aw man that's a bummer to hear. Were you able to meet up with the guy who got it, or how did you resolve it?

Terry
6/26/2025
I needed B&W support for a broken vent elbow and can report that they were fantastic. I spoke with real people. The hitch has been super, I love the easy adjustability and easy connect and disconnect.

Lazer S.
4/21/2026
Glad to hear it worked well for you, Douglas! B&W definitely makes some nice stuff. ^___^ That's quite the trip as well! What kind of bike (or bikes) were you hauling?

Claire H.
6/10/2026
Your set up looks great! We'd love to hear about your ride quality once you've taken it out on the road!

Chris R.
1/2/2025
Hey Charles! I was just reading through some reviews today and stumbled upon yours. Wanted to make sure everything is still holding up great. What was your favorite trip you took with the trailer in 2024?

Charles B.
1/7/2025
Best hitch Ive ever owned. I pull a 10,000 pound trailer with ~1500 pounds of tongue weight. Im 73 and this is the hitch I use that is the easiest and quickest to connect disconnect without straining. It is easily adjustable if the weight changes due to how you load you camper. The greatest added bonus is how quiet it is. No more squeaking popping bars when you make any turn. No rust issues and I live on the coast of Louisiana


Ken
2/15/2026
After a year of use I am extremely happy with my purchase. Needed a little costumer service in the beginning and they were Jonny on the spot! Costumer service means a LOT to me and they surpassed my expectations. Not only that but it’s a great product as well!

Do you have a question about this Weight Distribution Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Kate F.
6/5/2026
Thanks for your review, David. You make a good point about the ground clearance. The Continuum's design does place some components lower than a traditional weight distribution hitch, so clearance can become a concern when entering steep driveways, dips, or uneven terrain. For the sway and overall towing feel, it may be worth revisiting the hitch setup to make sure the trailer is sitting level and that the weight distribution is properly adjusted. Small changes to the setup can sometimes make a noticeable difference in handling. We appreciate you sharing your experience and hope you're able to get everything dialed in to better suit your truck and trailer combination.