Timbren Active Off-Road Bumpstops - Rear Suspension - 2,000 lbs
This item does not fit your vehicle
2017 Jeep Wrangler
These items fit your vehicle
2017 Jeep Wrangler
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy trailers or bed loads can make your suspension sag and throw off your steering and braking. These Timbren Active Off-Road Bumpstops add 2,000 lbs of rear suspension support to help your truck stay level and steady when the weight piles on. Whether you’re hauling tools, gear, or towing across the highway, the added support keeps your ride stable and in control without any air lines or extra maintenance.
Rough roads or sudden dips don’t have to mean a harsh jolt every time. These bump stops use a progressive spring rate that engages softly under light loads and stiffens as weight increases. That means less bounce when unloaded and firm, controlled support when you’re hauling heavy. The result is a smoother, quieter ride with less bottoming out whether you’re cruising pavement or tackling washboard trails.
Bottoming out can put a real strain on your frame and shocks. These bump stops cushion road shock before it can cause damage, protecting your suspension components and extending their life. The natural rubber compound absorbs the energy from rough impacts so your truck doesn’t take the beating. Powder-coated brackets resist rust and corrosion for durability through harsh weather and off-road conditions.
Timbren’s natural rubber compound holds up under heavy loads and repeated compression without losing shape or performance. Unlike standard bump stops, these are built to handle extreme off-road conditions and still come back for more. With their bolt-on design, they install easily and stay ready for whatever load you throw at them—no air pressure checks, no extra upkeep.
You don’t need air lines or compressors to keep these working right. The bolt-on design makes installation straightforward with included hardware, so they’re always ready when you are. Once in place, the system quietly goes to work absorbing shock and smoothing out axle engagement—helping you tow, haul, and drive with steady confidence trip after trip.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Timbren Active Off-Road Bumpstops for your rear suspension Has 4,000-pound weight capacity. Now, this is a custom-fit part. It is designed to fit the 2017 and newer Chevrolet Colorado 4 wheel drive trucks. And on a custom-fit part like this, I do like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show you if this will work for your application. Now, this kit here is gonna replace your rear factory bumpstops with these off-road bumpstops.
Gives you a greater control over your vehicle suspension when you're traveling off road. It will include everything shown here on the table: the two rubber bumpstops themselves, the two steel cups, the two mounting plates, your installation hardware, and a nice set of instructions that'll describe how this is installed. Now, these are progressive rate springs, which means that, instead of a hard stop at the end of axle travel, the axle energy is gonna be absorbed when you're bottoming out, producing a nice, smooth, predictable, and quiet axle engagement and disengagement. The progressive rubber springs will absorb the harsh jolt at the end of the axle travel, giving you a nice gentle ride the whole time. So this means less body fatigue and more time on the trail.
And unlike your factory bumpstops, these Timbren bumpstops are constructed of a superior natural rubber compound, which ensures the bumpstops are gonna continue to operate, even at a lifetime of off-road abuse. These are lots stronger than your OEM bumpstops. Now, the steel brackets right down here and the mounting cups, they are laser cut before they are painted with a nice, durable, long-lasting powder coat finish to ensure protection and a long life. These are designed to maximize your axle travel. They do enhance your rear suspension performance and they are a fairly easy installation.
The hardware we mentioned is included. And again, the capacity on these is 4,000 pounds. But that's gonna do it for a look at the Timbren Active Off-Road Bumpstops for your rear suspension.
Ratings & Reviews
Claire H.
8/21/2026
I'm glad you were able to make it work even with the zip ties being too close together when trying to relocate them to make space for the bracket. What are you planning on towing with your Maverick?
Tb.
2/18/2026
I have them on my 4th Gen Toyota. Have an Wedge Camper and can go backcountry with 600 lbs or more in the back. The Timbren Active Off-Road Bumpstops helped tons just last weekend while 4x4ing grinding out up old minning roads and camping in eastern CaliforniaNevada. Saved use numerous times form bottomming out hard. Very satisfied.
Kate F.
2/18/2026
Lance
10/18/2020
I pull a 20 ft car hauler with the Tundra and recently hauled a car to Arizona then hauled another back. The frame just touches the top of the Timbren when loaded. After 3,000 miles of driving I am even more convinced that this is a great product. The truck never squats from trailer load and the Timbren also keeps the ride smooth straight and steady when pulling a load. When unloaded there is about a one inch gap between the frame and the Timbren so it drives like stock when lightly loaded or unloaded.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Claire H.
8/21/2026
I'm glad you were able to make it work even with the zip ties being too close together when trying to relocate them to make space for the bracket. What are you planning on towing with your Maverick?