We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 13015

71 Reviews | 12 Questions

In Stock

$328.94

Retail:$553.95

You Save: $225.01

Not Confirmed to Fit

2022 Kia Seltos

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Visible Cross Tube 13015

Trailer Hitch 13015 - 1000 lbs WD TW - CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" 10000 lbs WD GTW 13015

13015 - Visible Cross Tube CURT Trailer Hitch

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" 2 Inch Hitch 13015

Show All (5) Product Images

Show Fewer Product Images

In Use/Installed

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" 600 lbs TW 13015 on 2000 Dodge Van

13015 - 6000 lbs GTW CURT Trailer Hitch on 2000 Dodge Van

13015 - 1000 lbs WD TW CURT For Towing on 2000 Dodge Van

CURT 2 Inch Hitch Trailer Hitch - 13015 on 2000 Dodge Van

13015 - 6000 lbs GTW CURT For Towing on 2000 Dodge Van

CURT Trailer Hitch - 13015 on 2000 Dodge Van

13015 - 2 Inch Hitch CURT Trailer Hitch on 2000 Dodge Van

13015 - Class III CURT For Towing on 2000 Dodge Van

Show All (8) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" customer photo

Show All (13) Customer Images

Show Fewer Customer Images

Videos

How to Install: Curt Trailer Hitch Receiver on your 2000 Dodge Van

Show All (1) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13015 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (71)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - 13015

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Tows up to 6,000 lbs (GTW): Handles small campers, boats, and utility trailers with stability
Holds up to 600 lbs (TW): Works with bike racks, cargo carriers, and other Class III accessories
Bolt-On Installation: Mounts directly to the frame using included hardware—no welding required
Durable Steel Construction: Fully welded, powder-coated design resists rust and corrosion
Supports Weight Distribution: Increases capacity to 10,000 lbs GTW and 1,000 lbs TW when used with WD system

Features to know about

Haul Everyday Loads with Confidence: Class III Strength and 2" Receiver

This hitch gives you the muscle to tow or carry gear without worry. With a 6,000-lb maximum gross trailer weight and 600-lb tongue weight, it’s built for light to moderate towing jobs like small campers, boats, or utility trailers. If you’re using a weight distribution system, those limits rise to 10,000 lbs GTW and 1,000 lbs TW. The 2" x 2" receiver works perfectly with common bike racks, cargo carriers, and ball mounts so you can put it to use right away.

Simplify Your Install: Bolt-On Design with Included Hardware

There’s no welding or fabrication needed here. The fully welded square-tube hitch bolts directly to the frame using the included complete hardware kit and clear installation instructions. That makes it ideal for a DIY install in the driveway using basic tools. Precision robotic welding ensures everything lines up just right for a secure fit every time.

Stand Up to the Elements: Durable, Corrosion-Resistant Steel

The gloss black powder coat finish sits over a protective base layer to fight rust and corrosion season after season. It keeps the hitch looking clean while adding another layer of durability for daily use, towing trips, or long hauls in all kinds of weather. The sturdy steel construction means you can count on it staying solid even after years of service.

Specs

Receiver Opening

Size: 2" x 2"

Rating

Class: Class III

Weight and Capacity

Maximum gross trailer weight: 6,000 lbs
Maximum GTW when used with weight distribution: 10,000 lbs
Maximum tongue weight: 600 lbs
Maximum TW when used with weight distribution: 1,000 lbs

Warranty

Limited lifetime warranty

13015 Curt Class 3 Trailer Hitch Receiver

Similar to Draw-Tite 75140

Installation Details 13015 Installation instructions

This Product Fits The Following Vehicles

1998 - 2003 Dodge Van Full Size with Standard Bumper

Customer Satisfaction Score:

96% were satisfied with this product

4% of customers were not satisfied

Arrived Damaged
etrailer mistake
Wrong item was ordered

4% of customers were not satisfied

Arrived Damaged
etrailer mistake
Wrong item was ordered

4.9

71 reviews

5 Stars		(64)
4 Stars		(5)
3 Stars		(1)
2 Stars		(1)
1 Star		(0)

by: Mike 07/02/2026

2000 Dodge Van

2000 Dodge Ram Van/Wagon retired extended passenger van.

I got lucky with no weld nuts on my van! Installation was a breeze even for a broke down 63 year old man with osteoarthritis, degenerative disks, and so much more. I didn't watch the clock and was interrupted by a phone call half way in but I estimate that once I laid everything out I had this installed in under 30 minutes.

Whether or not you can teach an old dog new tricks is still up for debate but you can learn some new tricks from this old Dawg.

Cardboard. Great for laying on to slide around from side to side without limiting space while protecting the hitch from scratched paint. The box it came in is a good start.

Rope. If you are like me you can't find good help, especially free help, so doing things yourself often requires ingenuity. Slide the hitch under the van and support the receiving tube close to installed position. Once you insert the bolts and plates, which I easily did without the fish wire, support one side of the hitch close to installed position as well. The rope is the extra hands you need and eliminates the strain of trying to hold the hitch up with your leg or the risk of it slipping off stands.

Start a couple of nuts on the free side, then move to the other removing the rope there and starting the nuts on that side. You can now remove the rope from the tube.

Start the remaining 2 nuts and gradually hand tighten them all.

IMPORTANT- The hitch flange, at least in my case, lands right up against the body to frame welds. When you start snugging the nuts snug the two rear first as there is just enough slack to position the hitch against the frame without overlapping the sheet metal welds. Tighten all the nuts with a ratchet and long extension and finish with the torque wrench.

DONE! Probably taking me longer for this review than actual installation and.....

I didn't watch any videos prior to installation.

Click to Enlarge

Claire H.

7/6/2026

Thanks for sharing your tips and tricks with us! It'll help out others in the future who may be doing the same installation.

by: Eric 10/07/2026

1999 Dodge Van

I am in the process of repairing and modifying a 1999 Dodge B3500 extended van and wanted a receiver hitch. etrailer had exactly what I needed, even great pictures of the hitch installed on a similar van. Shipping was incredibly fast and it arrived packed well. Installation was a breeze, I was able to do it by myself. I am very happy with this hitch and with the service I received from etrailer. Thank you!

Click to Enlarge

by: Ryan 10/14/2026

2000 Dodge Van

Hitch arrived on time, in great condition, and fit perfectly. My second purchase through e-trailers and it won’t be the last.

by: Joshe 06/13/2018

1999 Dodge Van

First time ordering from etrailer. Awesome experience. Easy finding the correct hitch, quick shipping and a easy install. Bolted right up. The wire fish to get the bolts into the frame was a very nice touch. Appreciate a stand up business, in a time where so many are shady.

Click to Enlarge

Joshe One Year Later

6/13/2019

Great no issues.

by: Peter 05/05/2026 One Year Later

I’ve had it for a year. It works really well. Installation was super easy but there’s signs of rust on it already.

by: Olaf 05/14/2020

Thanks for your inquiry. Last Saturday, the weather finally was good enough and the tow-bar went up without a hitch (pun intended) onto our little Roadtrek.
The bolts proved long enough to do a stress-free one person one-side-at-a-time lift-in-place into a perfect fit, which was really nice.
Those same bolts were a tad long for a 100% insert of the nuts into the regular sockets of my 'real' torque wrench but torquing it all up went just fine.

See photo's, all ready for the bicycle carrier (on extender). 5 stars.

Click to Enlarge

by: O 01/14/2026

1998 dodge Ram Pickup

Second hitch I've bought and installed from this company, same brand as well. Came quick, installed in about 30mins. All holes lined up perfectly. Once installed, the only part of it that shows is the square receiver. Very professional appearance once installed. Thanks!! 1998 Ram 1500 Conversion Van.

by: Jonathan 06/27/2024

Quick and easy installation. Everything was simple to order and fit as is should. The how to videos really helped. Thanks ya"ll

Click to Enlarge

Click to View

Katrina D.

7/3/2024

Nice catch while fishing! I absolutely love your additions to the review. Let us know how your catch works for your first towing venture.

by: Robert 12/20/2025

2000 dodge Ram Pickup

It is a perfect fit for my 2000 Dodge Ram 1500 Van. It feels extremely durable and well put together. It is quite heavy, I would recommend a 2 man team although I was able to put it on by myself. It came with proper instructions along with the torque specs so you can do it yourself if you desire or do not have the money to have a shop do it. The delivery was also very quick, I didn't need it immediately but it was nice that it was quite prompt.

by: Norm 04/04/2025

1998 Dodge Van

Perfect fit and excellent quality.

Norm C. One Year Later

4/4/2026

Couldnt be any better, perfect fit. Thank You

by: Christopher 05/18/2026

2000 Dodge Van

Perfect fit, love it

by: Steve H. 09/02/2015

We had the hitch unpacked and installed in 20 minutes. Perfect fit and AWESOME customer service. Thanks Vince!

Click to Enlarge

by: Daron 04/10/2026

Fit perfectly easy to install

by: Robert 05/01/2023

1999 Dodge Van

Great website, easy to deal with. The hitch and wire harness worked perfect. It took me 45 minutes to install.

Robert One Year Later

5/2/2024

No Issues. Good Product, fair price.

by: Dave W. 10/21/2024

2010 Dodge Ram Pickup

Fits Ram Van 1999-2004. My frame had the pre-installed nuts, so I bought 6 Class 10.9 Steel Cap Screw, 45mm Length, Fully Threaded, M12-1.75 Metric Coarse Threads bolts. The holes were off by about 1/4 inch, so I took a 5 lb. sledge and pounded one side of hitch until it lined up. The paint stood up to the pounding pretty well and that was the only issue for installation (thus the 4 star rating).

by: Thomas 06/30/2021

Perfect fit, easy one-person installation. Easier to put in position if you don't use a lift. Prop up the hitch on some 2x4s to put in position, unless you can talk someone into sliding under the vehicle with you. Only tools needed are the proper socket, extension, and a torque wrench (directions say 110 ft-lbs). Hardest part was removing the older small hitch.

by: Tom 05/27/2016 One Year Later

2002 Dodge Van

Product just as described. Bolted onto vehicle easily. Easy purchase. Great price. Very prompt shipping. Great followup.

Tom One Year Later

6/5/2017

Great

by: Dallas 12/31/2022

2001 Dodge Van

The hitch is heavy duty and well made however the hardware was incorrect for my vehicle. It came with carriage bolts and plates that get pulled through from inside the frame, then nuts are used outside to attach the hitch. However my vehicle already has threaded inserts inside the frame. I ended up having to source the proper size bolts myself.

by: Troy 08/22/2017

1999 Dodge Ram Pickup

Fantastic service and hitch. Called to verify fit on my 99 Dodge Ram Van 3500 RoadTrek and spoke to really nice guy who confirmed it for me. Arrived promptly and very well packaged and nicely painted. Heavy duty thang! Great detailed video for installation. You guys rock eTrailer! Best price I found too!

by: Donald 04/05/2023

I received this well built hitch quick. Mounted it even quicker and install went without a hitch lol. I will not hesitate to call on y'all again. Great company and well thought out package with all necessary parts to make this install perfect. Thank y'all...

by: TSorsen 03/13/2012

1998 Dodge Van

the right hitch with no luck. I shopped online and found a couple $50-$75 more with shipping. Then I saw Etrailers ad and clicked on it, not only was it priced better I spent enough for the free shipping and to top all that they upgraded me to 2 day shipping. They are awesome!!! If and when I need something else I will be back. They estimated the installation at 40min it took like 20min and was so easy.THANKS again!!

by: Roy 08/17/2021 One Year Later

The trailer hitch for my 98 Dodge van fit perfect, looks great and was easily installed by myself.

by: Maury 08/09/2025 One Year Later

Great fitment and easy to install.

by: NELSON L. 02/10/2017

I would like to say great job. I place an order and in two days the order was delivered in full. There was no backorder on the items I order. It was very easy placing my order on the etrailer website. Once again great job!!

by: William 01/28/2019

1998 Dodge Van

delivery was faster than they say, and the part went on in less than a hour. haven't gotten to use it yet to pull trailer or a cargo rack but up to this point love it!

true

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

Could Curt Hitch # 13015 Fit 2000 Dodge 3500 Roadtrek Van 190
I looked up pictures of 2000 RoadTrek RV's made from Dodge Vans and some of them appear very similar to the standard Dodge van they were built off of and our hitches like part # 13015 would fit and work well. Check out the picture I attached and if the rear bumper is the same as what is in the picture this hitch would fit and work well. The second picture I attached shows the underside of the van with the hitch installed. You would need to compare that to your vehicle as well.
view full answer...
Recommended Hitch for 1998 Dodge Ram B1500 Van with Factory Standard Bumper
For a 1998 Dodge B1500 van with a standard factory bumper (and no weld nuts in the frame) the hitch I recommend is the USA-made Curt # 13015. I suggest this hitch because it has a higher weight rating than the Draw-Tite # 75140, 6000-lbs trailer weight rather than 5000-lbs, which gives you a useful safety margin. It includes all required hardware and an installation video is linked for you too. If you also need a 4-pole harness you can use Curt Powered Tail Light Converter with 4-Pole...
view full answer...
Trailer Hitch for a 1999 Dodge Ram Van to Move a Boat Trailer
There are no front mount trailer hitches that will fit the 1999 Dodge Full-Size vans. They are not built on the same platform as the Ram trucks of the same generation so the front mount hitches for the Ram trucks will not fit the Ram Vans. You can install a rear trailer hitch. If your van has the standard bumper then you can use # 13015 (Hitch will not work on models with existing weldnuts on the frame). And if it has the factory step bumper use # 13590.
view full answer...
Hitch Availability for 1999 Dodge 1500 Conversion Van
Several hitches, both Class III and Class IV types, are offered for the different versions of the 1999 full-size Dodge van. The key factor in selecting the right one is the type of bumper on the van, either a standard bumper or a step bumper. The presence of the spare tire is not noted by the manufacturers as affecting the fit; only the bumper type matters. Please see the linked article on bumper types. Versions of the van with existing weld nuts on the frame are not compatible with certain...
view full answer...
Parts Needed To Tow a Trailer with Brakes with a 2000 Dodge Van 3500
I have a few different trailer hitch options for a 2000 Dodge Van depending on the bumper, if you have a step bumper then we have the Curt Trailer Hitch Receiver part # 13590 but if you have the standard bumper we have the Curt Trailer Hitch Receiver part # 13015. These capacities are right at the end of your needs but they can be increased when using a weight distribution system like the Curt Weight Distribution System part # C17341. In order to add a trailer connector for a brake controller...
view full answer...
Does B&W Trailer Hitch Fit a 2000 Dodge Van 3500
The B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25198 fits a variety of pickups but you'll need a different hitch for your 2000 Dodge Van 3500. From the linked selection I recommend going with the Curt # 13590 if you have the factory step bumper or the Curt # 13015 if you have the standard bumper. If you plan on using this for towing then I recommend using the Tekonsha Wiring # 118368 and checking out Ball Mount Kit # 989900 because it includes two ball mounts, one with a 3/4” rise/2”...
view full answer...
What Are Weldnuts And What Hitch Will Fit A 2001 Dodge Van Using The Existing Weldnuts
Weldnuts are the nuts that a mounting bolt will thread into and are welded to the holes on the inside of the vehicles frame. Usually it is just a nut inside the vehicle frame but it might be a plate with threads. Removing the weldnuts might be very difficult since they are located inside the vehicles frame and hard to access. I am sending a link to a video that will show how to remove corrosion inside a weldnut. This video will show you the weldnut in the frame. On your 2001 Dodge Full...
view full answer...
Recommended Trailer Hitch for 2019 Ram 1500
If your 2019 Ram 1500 isn't equipped with a factory hitch I strongly recommend the Curt Class III Receiver Hitch # C13419. This custom hitch will line right up to existing holes in the frame rails of your Ram for a no-drill installation, features a 6,000 pound towing weight capacity, and is made right here in the USA. The Curt Trailer Hitch # 13015 that you referenced is designed for certain model years of the Dodge Van and will not fit your Ram. I have attached the installation instructions...
view full answer...
Can The Curt Trailer Hitch Receiver # 13015 Be Installed With Bolts Rather Than The Carriage Bolts?
While I have seen reviews that the Curt Trailer Hitch Receiver # 13015 was able to be installed with bolts on a 2002 Dodge Ram 2500 Van I cannot recommend doing this. Since the instructions only show the installation being done with the included carriage bolts any failure would be blamed on an incorrect installation. Instead you would want to use the Draw-Tite # 75140 which comes with both styles of hardware and has additional brackets that are likely needed to support the receiver when...
view full answer...
Hitch and Bike Rack Recommendation for a 2002 Dodge Ram Van
You can use the Hollywood Racks SR1 Bike Rack part # HRSR1 on a vehicle that has an off-center spare tire, but since yours has a cover on it this would not be the correct rack to use unless you were okay with removing the cover. You would first need to start with a hitch if you do not have one already. For that you would want the part # 13015 as it has been confirmed as a fit for your vehicle. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman...
view full answer...
Hitch and Bike Rack Recommendation for a 2000 Dodge 1500 Camper Van
We don't have any front mounted hitches or bike racks available for your 2000 Dodge Camper Van. The best option I could list for you would be to go with a rear mounted hitch and bike rack. For a hitch I would recommend the # 13015 if you don't have one already. For a bike rack you should check out the Swagman XTC2 part # S64670. This is a great rack at a great price that our customers have left a ton of positive reviews for. Check out the review video I attached for more info.
view full answer...
Recommended Hitch for 2001 Dodge Van 2500 With Motorcycle Carrier
The Curt Trailer Hitch # 13015 is a confirmed fit for your 2001 Dodge van with a standard bumper, and will work well with an motorcycle carrier like the etrailer Motorcycle Carrier # e98873. The motorcycle carrier has a weight capacity of 500 pounds. Keep in mind you will want the carrier weight and the weight of your motorcycle to stay within the tongue weight limits for your hitch receiver and your vehicle. You may also want to check out part # e98882. This lock is perfect for keeping...
view full answer...

Do you have a question about this Trailer Hitch?

Info for this part was:

Updated by:

Leah B

Updated by:

Wilson B

Updated by:

Kristina F

Written by:

Lindsey S

Expert Research:

Jeff D

Expert Research:

Jameson C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.