To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
60" Long x 19-1/4" wide x 13-1/2" deep; 7.2 cubic feet; 2" height above bed rails; standard box with foam filled lid and paddle lift handles; low profile top; aluminum construction
Features:
Specs:
You will enjoy how much the sleek look of UWS's Low Profile Series complements the latest designs of today's trucks. The toolbox sits just 2" above the truck bed rails instead of the standard 4," providing a better view out the back window for maneuvering or keeping an eye on your load. The insulated, beveled, single lid opens fully to 90 degrees with the help of two super-duty lift cylinders, which raise the lid and hold it open as you load and unload your gear. Smaller items and tools can be stored conveniently on the divided, sliding tray, ensuring they are readily available for use.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to review part number UWS00369. This is the UWS truck bed toolbox. It is the crossover style and the low profile series design. You will enjoy how much the sleek look of this low profile series will complement the latest design of todays trucks. This toolbox will sit just two inches above the truck bed rails instead of the standard four inches, which will provide a better view out your rear window for maneuvering. The insulated bevel single lid opens fully to 90 degrees with the help of these two gas cylinders, which will raise the lid and hold it open as you load and unload your gear.
Smaller items can be stored conveniently in this divided sliding tray. Again this is a crossover saddle style toolbox. Basically that means itll hang from your truck bed rails right here. Truck bed rails will go right under each side behind the cab. It is a low profile, thats why its a two inch right here design, which will make it easy to see your window.
It is an aluminum construction which has fully welded seams, which are guaranteed not to rust. It does have heavy duty stainless steel paddle latches, one on each side, with a lock right here on the drivers side that comes with two keys. The other nice feature is on the inside they have an enclosure thatll protect this connecting rod. Theres a rod that connects this latch to that latch. You only need to open one latch on each side to open the lid.
Theres a rod thats exposed, but they do have an enclosure that covers that rod or protects from inside of damaging that connecting rod. This bevel lid has a bevel edge on it so theres no sharp edge to it. Its a patented foam filled lid which will provide insulation and protection from the elements. It is also structural foam which will reinforce the shape and strength of the lid, that way it allows you to close and open it by just being on one side. It does have the heavy duty gas cylinders, one on each side, which will help lift it and open a full 90 degrees.
Another nice feature is the full length of the lid is a piano hinge and thatll also help in giving it support for opening and closing and staying even all the way across. There is this dividing plastic sliding tray for smaller items or tools. It also comes with the J bolt hardware. This part is made in the USA. I do want to show you if you turn this a quarter of a turn, pull the key out, it will lock the latches so you cannot get into it. To open it up just put the key back in, turn it quarter of a turn; it allows you to open it up. The inside capacity is eight cubic feet of usable space. It does come with a one year warranty. The aluminum is a .063 tread plate construction. I do want to give you a few measurements. The overall length on this is going to be 60 inches. The width on it is going to be 19 and a quarter. The overall height 13 and a half inches. Basically if you want the dimensions with the lid closed you would just add an inch to all those dimensions. That should do it for review on part number UWS00369.
Ratings & Reviews
David
8/10/2025
Other than the weather stripping falling off the lid, the box still looks and works like new. The lid opens and shuts with ease and the locking mechanism still functions perfectly.
Seth S.
3/17/2021
Toolbox is still holding strong, even after a snowy Idaho winter. I would recommend to upgrade the seal as I did find some snow on the inside from the windsnow in Idaho.
Jim D.
2/8/2024
very good box no problems feels very solid when you put lid down im very happy
Jeffry
11/21/2025
Perfect! Exactly what I needed
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Edward B.
4/10/2022
I have owned this UWS took box for over a year now hard to believe it has been that long. The tool box is holding up good no problems just tightened the j-hooks was all I drive on bumpy roads here in Idaho so it handles the snow rain and dust nothing gets inside its dry as a bone. I can even stand on toolbox if I need to its that sturdy. This fits my 2002 Ford Ranger Stepside even though it says doesnt fit my bed is not as wide as normal rangers they need to change that in will this item fit your truck yes it does. The paint is holding up and the locking mechanism no problems there. People notice it but when they here the price they buy cheaper tool boxes but in my opinion you get what you pay for. I give this box 5 stars for durability and quality you will not be disappointed if you purchase a UWS toolbox.