See what our Experts say about this etrailer Trailer Tongue Lock

• Are Replacement Keys Available for etrailer.com Locks
  There will be a number on both the lock core and keys for etrailer.com coupler locks. This number is usually a zero followed by two other numbers. The three digit numeric value will correspond to the correct cut needed to operate the lock. If you already have an etrailer.com lock and just need the replacement keys then you you need to find the key number and we would be happy to help.
  view full answer...
• Best Coupler Lock for Demco Channel Tongue Coupler
  My best recommendation is the etrailer Surge Brake Coupler Lock # e98887. This lock fits into either one of the two pin holes of your coupler # 12564. This locks your latch into place so one can't disconnect it from your tow vehicle. It also works when your trailer is stored unhitched since thieves can't hitch your trailer to their vehicle with this lock in the way. Another popular lock for trailer storage is the etrailer Trailer Coupler Lock for Flat Lip Couplers # e98893. This completely...
  view full answer...
• Coupler And Hitch Lock Set With Multiple That Can be Keyed Alike
  While there is an option to get coupler and hitch locks that can be ordered with each of them using the say key, there isn't a way to order the Reese Tow and Store Lock Kit # RP7014700 with a specific key number or multiple kits that have the same key. The best option available to get multiple locks that all use the same key is with a couple different locks: - etrailer Hitch Receiver and Coupler Lock Set # e99039 - etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Ball Couplers...
  view full answer...
• Replacement Key for etrailer Coupler Lock
  Assuming the lock you have that is similar to the # e98893 is an etrailer lock, we do have replacement keys available. Since you have a key already you can look at the key for the 3 digit number engraved on the key. Once you have this number you will be able to choose the correct replacement key for a spare. For example, if you have 014 on your key then the # e88UR would be the correct spare. If you have a different lock brand feel free to reach out and let me know what you have along...
  view full answer...
• Recommended etrailer.com Coupler Lock for Lipped Coupler 4-1/2-Inches Wide
  The etrailer.com Coupler Lock # e98893 fits standard lipped couplers for 1-7/8-inch and 2-inch hitch balls up to a maximum width (including the lip) of 3-3/4-inches. Instead you can use our Coupler Lock # e98895 for 2-inch and 2-5/16-inch balls since this works with lipped couplers up to 4-1/2-inches in width.
  view full answer...
• Lock For Curt QuickPin No-Latch Trailer Coupler for 2 Inch Ball
  There are a couple of different ways you can lock the Curt QuickPin No-Latch Trailer Coupler for 2" Ball, either with a standard coupler lock, or you can use a 1/2 inch diameter hitch pin lock, since that is the same size as the pin and clip (though you should always use the pin and clip that come with the coupler when towing and not a lock). So to lock it you can use any of the following options, depending on what you prefer: - etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2"...
  view full answer...
• Difference Between etrailer Trailer Coupler Lock e98897 And e98893
  The etrailer Trailer Coupler Lock - Flat Lip 1-7/8" and 2" Ball Couplers - Aluminum - Yellow # e98897 and the etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Ball Couplers - Aluminum - Silver # e98893 is the exact same part, the only difference is what color they are powder coated.
  view full answer...
• How to Use the etrailer Coupler Lock for Flat Lip Couplers
  I can absolutely explain how the etrailer Trailer Coupler Lock for your flat lip coupler works, and it is extremely simple. What happens is you will slide the lock over your flat lip coupler, and push the pin up - it won't take any strength at all, you can do it with a finger. With the pin up, just turn the key and you're done; it's locked to the coupler. When you want to remove it, turn the key in the opposite direction and the pin will come down. That's literally all there is to it!...
  view full answer...
  
• Can You Get Replacement Keys for Trailer Coupler Lock - Gorilla Guard
  I do have an option for you but we no longer offer replacement keys for the Trailer Coupler Lock - Gorilla Guard part # 63227. If you would like to replace the lock in favor of one with replacement keys, I recommend the etrailer Trailer Coupler Lock part # e98893 which you can order multiple of with the same key using the keyed alike option and you can obtain extra or replace the keys if needed. If you want extra keys or need to replace them, just let me know what key number you have and...
  view full answer...
• What is the Distance Between Bolt Holes on 1-7/8
  From center to center, the distance between the two side bolt holes on # CT-2003-Z is 2-1/4". On # DL13728 the distance is 3". Both trailer couplers fit a 3" channel tongue, a 1-7/8" ball and are rated at 2,000 lbs. If you are replacing your coupler, it may also be time to replace your coupler lock. I recommend the etrailer.com Coupler Lock, # e98893, which works with 1-7/8" couplers.
  view full answer...
  
• How Many Keys Can I Get for the etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Couplers
  The etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Ball Couplers # e98893 comes with 2 keys and if you're ordering more than one of these you'll select the "keyed alike" option from the drop down menu on the product page to have matching keys. Otherwise if you're wanting more than 2 keys for this coupler lock you'll have to order the coupler lock and then place an order for the key number that came with the coupler lock.
  view full answer...
• Recommended Trailer Coupler Lock For A Travel Trailer
  It sounds like you're needing a trailer coupler lock! I recommend checking out the: -etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Ball Couplers # e98893. This trailer coupler lock will fit standard ball couplers that are for 1-7/8" or 2" balls. Additionally, this lock is tamper resistant is made in the USA, and can be keyed alike to match other etrailer locks.
  view full answer...
• Availability of Replacement Key for Draw-Tite Trailer Coupler Lock
  We used to carry replacement keys for those locks but Draw-Tite discontinued those keys and so the only option we have is for you to replace the entire lock with something like part # e98893 or # e98894.
  view full answer...
  
• Availability Of A Coupler Lock That Can Be Keyed Alike To A Draw-Tite Locking Hitch Pin
  For your 2022 Ford-350, there isn't an option that will allow you to key the Draw-Tite Trailer Hitch Receiver Lock # 63259 with any of our coupler locks. However, there are a couple options you can choose from here. You can use the BOLT Trailer Coupler Lock # BL7032496 which will utilize the center cut key on your 2022 Ford F-350, or you can use the etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Ball Couplers # e98893 which can be keyed alike to match other etrailer locks if...
  view full answer...
• Needing Keyed Alike Hitch and Coupler Locks for 15 Trailers
  The etrailer branded hitch and coupler locks (see links) are all available keyed alike. Since this is a commercial application, you'll likely need locks for either a 2 or a 2-1/2 inch hitch. For a 2 inch lock, go with the # e98882 or for a 2-1/2 inch hitch, use # e98881. The etrailer brand coupler locks can also be had keyed alike the same way, such as # e98886 for a latch style coupler lock with a 2 inch span (many other width spans available) or the Fat Lip # e98893 for 1-7/8 or 2...
  view full answer...
• Are There Replacement Keys for Tow Ready Trailer Coupler Locks
  I do have an option for you but we no longer offer replacement keys for Tow Ready products like the Trailer Coupler Lock part # 63228. If you would like to replace the lock in favor of one with replacement keys, I recommend the etrailer Trailer Coupler Lock part # e98893 which you can order multiple of with the same key using the keyed alike option and you can obtain extra or replace the keys if needed. If you want extra keys or need to replace them, just let me know what key number you have.
  view full answer...
• Recommended Trailer Coupler Locks for Open Car Hauler
  We have numerous hitch and coupler locks available. I'm assuming you're looking for a coupler lock that would prevent somebody from hitching your trailer up and taking off with it, is that correct? If your trailer uses a simple latch style coupler like part # BD580403. The locking pin would insert through the hole in the coupler latch, and would prevent the coupler from being opened. If the coupler has a flange around it's lower edge, something like our # e98893 would work well on 1-7/8...
  view full answer...
• Difference Between etrailer Trailer Coupler Locks For Flat Lip 1-7/8" and 2" Ball Couplers
  Hi Scott, You got it right, the only difference between the two is the color and they are otherwise the same: - Silver: etrailer Trailer Coupler Lock - Flat Lip 1-7/8" and 2" Ball Couplers # e98893 - Yellow: etrailer Trailer Coupler Lock - Flat Lip 1-7/8" and 2" Ball Couplers # e98897 As for your second question, they cannot be ordered with specific key numbers, I'm sorry to say.
  view full answer...
• Recommended Lock for Demco A-Frame Trailer Coupler
  For the Demco A-Frame Trailer Coupler # DM14793-81 you can use the etrailer # e98887. This will fit the pin hole on the coupler keeping it secure. Another option is the # e98893 which fits over the coupler and blocks the ball opening. You could also use both at the same time for added security. Since these are both etrailer locks, you can select the keyed alike option so they use the same key for your convenience.
  view full answer...
• Recommended Storage Cover for a 1998 Alegro Bus Motorhome
  I recommend the Adco Olefin HD All-Climate + Wind RV Cover for Class A Motorhome, # AD84ZR. This will fit Class A motorhomes to 40' fit, use the cinch strap at front and rear to pull in any extra material for a tight fit.
  view full answer...
• Coupler Lock Suggestion For A U-Haul 6x12 Cargo Trailer
  I did some research and it looks like your U-Haul trailer will accept 1 7/8"- 2" ball, so # e98893 will be the correct part, although you should double check yourself. If it turns out yours is larger than that, part # e98894 will work accept a 2" to 2 5/16" ball and would be the correct choice.
  view full answer...
• Recommended Coupler, Coupler Latch and Locking Hitch Pins All Keyed Alike
  I may have a solution for you, but those MasterLock trailer locks you were looking at unfortunately cannot be keyed alike, so you'd need some different options. For the coupler locks I recommend using the etrailer 2-5/16" coupler lock # e98894 or etrailer 1-7/8" or 2" coupler lock # e98893. For the latch lock I recommend using the etrailer # e98885 and for the locking hitch pins I recommend using the # e98882. You could have all of these parts keyed alike so you'd only need 1 key.
  view full answer...
• Can Multiple Master Lock Trailer Coupler Locks ML389DAT Be Ordered With Same Key
  I do have options but the Master Lock Trailer Coupler Lock part # ML389DAT does not have a keyed-like option so even if you were to order multiple at the same time, they still would not come with the same key most likely. Therefore, it would not be possible to order a new lock that uses the same key as the one you already have. The etrailer Trailer Coupler Lock part # e98893 for example does have a keyed-alike option so you could order multiple at the same time with the same key. I have...
  view full answer...
• Can Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set be Keyed Alike
  We may have an option for you, though there isn't a way to get three keyed-alike sets of the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set - 1-1/4" and 2" Hitches # 3794DAT. If you have a flat-lip coupler, you can get get keyed-alike sets of etrailer locks by hitting "Keyed Alike" on the drop-down on the product pages, which I'll link for you below. You would need to get the locks individually but they will all be keyed alike. So what you can use are the following: - etrailer...
  view full answer...

Do you have a question about this Trailer Tongue Lock?