Go Power MC4 Output Cable with Male and Female Connectors - 3' Long

See what our Experts say about this Go Power Accessories and Parts

How To Wire Go Power...

Solar Panel for Moto...

Can Additional Solar...

• Adding Extra Solar Panels To A GP-CEP Roof Entry Setup
  You can add additional panels to your system but you first have to ensure that the total amps from the panels won't exceed what your Solar Controller can handle. Once you know that it you can easily plug in the expansion branch from panel to panel and if you need to place the panels further apart we also offer a 3' long and 10' long connector. Replacement MC4 Expansion Branch for Go Power Solar Panels - 2 Male and 1 Female Item # 34267040 Go Power MC4 Output Cable with Male and Female...
  view full answer...
• How To Wire Go Power Solar Panels Together
  The Go Power Solar Panels that we offer such as the Go Power Overlander Solar Charging System with Digital Solar Controller part # 34282181 are linked together using MC4 cables. These cables are available using the Go Power MC4 Output Cable with Male and Female Connectors part # 34274672 for 3' long, part # 34276216 for 10', or part # 34279532 for 15' long. I have attached a sample photo to show how the connections are made.
  view full answer...
  
• Plug For 190 Watt Go Power Overlander Expansion Kit
  The Go Power Overlander Expansion Kit - 190 Watt Solar Panel # 34282182 connects to a Go Power solar system via MC4 connectors. The kit comes with those connectors but if you need to add extensions you can do so with whatever length you might need: - 3' Long: Go Power MC4 Output Cable with Male and Female Connectors # 34274672 - 10' Long: Go Power MC4 Output Cable with Male and Female Connectors # 34276216 - 15' Long: Go Power MC4 Output Cable with Male and Female Connectors # 34279532
  view full answer...
• Are Go Power Solar Panels 34282182 Compatible With Battle Born Controller
  So long as the solar controller has MC4 connectors, it will be compatible with the Go Power Overlander Expansion Kit - 190 Watt Solar Panel # 34282182. While I couldn't find the exact model that came with your bundle, the controllers from Battle Born I was able to find did have MC4 connectors, however, I do recommend verifying that the controller has those connectors, which will allow you to use the Go Power Overlander Expansion Kit - 190 Watt Solar Panel # 34282182. If you need longer...
  view full answer...
• Solar Panel for Motorhome Pre-Wired With Go Power Solar Controller GP-PWM-10-SQ
  Thanks so much for the photos, and yes, you can add a solar panel and plug it in. What your photo shows is your solar controller is GP-PWM-10-SQ, and those plugs are MC4 branch connectors. That solar controller is a 190 watt, 10 amp controller, so you will need a solar panel that meets those specs: - Go Power Overlander Expansion Kit - 190 Watt Solar Panel # 34282182 It is likely you will need extended cables to plug into the branch connectors, and you can choose from the following, based...
  view full answer...
  
• Go Power Solar Charging System for Pre-Wired Trailer with Curved Roof
  Since you already confirmed with Go Power that their Overlander Solar Charging System # 34282181 is confirmed to work with the pre-wiring on your travel trailer I would not suggest something else instead. This complete system includes the 190-watt panel, controller and wiring and installation will be a lot easier than with another product that may not work with your factory pre-wiring. Another excellent long-term benefit of this system is that is is expandable simply through addition of...
  view full answer...
• Replacement Output Cable For A Flexible Go Power Solar Panel
  Yes, The Go Power MC4 Output Cable with Male and Female Connectors # 34274672 is the replacement chord you will need. This chord will connect your solar panel to your solar controller or other application. This cord is 3 foot long. We also have other sizes listed below: Go Power MC4 Output Cable with Male and Female Connectors 10 foot # 34276216 Go Power MC4 Output Cable with Male and Female Connectors 15 foot # 34279532 Go Power MC4 Output Cable with Male and Female Connectors 50 foot...
  view full answer...
• Can Additional Solar Panels be Added to Go Power Weekender ISW Charging System
  You can add some extra panels to the Go Power Weekender ISW Charging System # 34282183 so that the output of the solar panels is closer to the 30 Amps you are looking for. All you need to do is add two of the Go Power Overlander-E 190 Watt Solar Expansion Kit # 34282182. These come with everything you need to add them to the Weekender ISW system as long as you have room to mount all three 59-1/8" long x 26-5/16" wide x 1-1/2" deep panels next to each other. If you don't have enough room...
  view full answer...
  
• Hardware, Wiring, and Entry Plate Needed for 190W Go Power Solar Panels
  Each 190 Watt Go Power Overlander Expansion Kit # 34282182 comes with the following connectors and hardware which you can pick up here if you're needing a replacement: Mounting Hardware - # 34272708 MC4 Expansion Branch 1 Male and 2 Female - # 34267049 MC4 Expansion Branch 2 Male and 1 Female - # 34267040 There should also be enough wiring included with each solar panel to link them together although we do have replacements like the 3' Cord # 34274672 or 10' Cord # 34276216. If you're...
  view full answer...

Do you have a question about this Accessories and Part?