bing tracking image
  1. Trailer Lights
  2. TecNiq
  3. Clearance Lights
  4. Round
  5. LED Light
  6. Amber
Mini Clearance/Side Marker Light w Grommet - Submersible - Amber LED - Amber Lens - 20' Pigtail
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
TecNiq

Mini Clearance/Side Marker Light w Grommet - Submersible - Amber LED - Amber Lens - 20' Pigtail

Part Number: TN47MR
In Stock
$10.72
Retail:$13.32
You Save: 20%
Trailer Lights
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This amber light functions as both a front side marker and clearance light. PC rated. 20' Long pigtail. Great Prices for the best trailer lights from TecNiq. Mini Clearance/Side Marker Light w Grommet - Submersible - Amber LED - Amber Lens - 20' Pigtail part number TN47MR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (265)
  • Q & A (0)
  • Videos (1)
  • Photos

TecNiq Trailer Lights - TN47MR

Highlights

  • Always Visible on the Road: PC-rated design gives 180° of amber light for clear side and front marking.
  • Reliable In Any Weather: IP68 submersible seal and urethane potting keep water and dust out.
  • Built to Last: Premium LED runs up to 100,000 hours and resists vibration and impact.
  • Simple, Clean Mount: Fits a standard 3/4" cutout with included recessed grommet.
  • Low Power Draw: Uses only 0.03–0.06 amps at 9–14V for efficient operation.
  • Road Legal: Meets or exceeds FMVSS 108 standards for trailer lighting compliance.
Made in USA

Features to know about

Brighter, Longer-Lasting Visibility: Efficient Amber LED Light

This compact 1" round light puts out a clear amber glow using a single LED that’s rated for up to 100,000 hours. It draws only 0.03–0.06 amps at 9V–14V, so it stays bright without putting strain on your electrical system. The LED is energy efficient and vibration resistant, which means it’ll keep shining even after years of use.

Harsh Conditions and Wet Environments: Fully Sealed and Submersible

Designed to take on rough weather and water exposure, this light is IP68 rated for dust and waterproof performance. The housing and amber lens are sealed together as one solid unit, keeping moisture out even when fully submerged. Inside, the circuit board is encapsulated in TecSeal urethane potting for extra defense against corrosion and impact—perfect for trailers that see launch ramps or heavy rain.

Better Coverage with One Light: PC-Rated 180-Degree Beam

You get clearance and side marker visibility from a single light thanks to its PC rating. It projects a 180-degree arc of amber light that can be seen from the front and both sides, meeting or exceeding FMVSS 108 standards. Mounted at a corner, it covers both lighting functions while staying compact and easy to place.

Clean Install in Tight Spaces: Compact Recessed Mount Design

At just 1" in diameter and 7/8" thick (3/4" without the grommet), this light fits neatly into tight spots. It installs flush using the included grommet in a standard 3/4" cutout, keeping things tidy and protected from snags. The hardwired 20' pigtail gives you plenty of length to reach your connection point without splicing extra wire.

Built to Last: Durable Materials and Solid Construction

The polycarbonate housing is tough and UV-resistant to handle long days in the sun without fading or cracking. Combined with military-grade circuit board construction and reliable LED performance, this light delivers dependable safety lighting that’s ready for years of service.

Specs

Dimensions

  • Dimensions: 1" diameter x 7/8" thick
  • Dimensions without grommet: 3/4" diameter x 7/8" thick
  • Requires a 3/4" diameter cutout: Yes

Technical diagram showing dimensions of TecNiq Mini Amber LED Clearance and Side Marker Light with and without grommet, including required 3/4-inch cutout.

Electrical

  • Diodes: 1
  • Input voltage: 9V - 14V
  • Power draw: 0.03 - 0.06 amps

Wiring

  • Wire length: 20'

Ratings and Warranty

  • IP rated: 68
  • Limited lifetime warranty: Yes

Diagram illustrating 180-degree light spread of PC-rated amber LED clearance and side marker light, showing 90-degree coverage on either side of centerline.

  • PC-rated light coverage: Produces a 90-degree angle of light on either side of its centerline for a total of 180 degrees of coverage.

S34-RRN9-1 TecNiq Amber Mini LED Side Marker - Clearance Light - PC Rated - Amber Lens - 20' Wire





Video of Mini Clearance/Side Marker Light w Grommet - Submersible - Amber LED - Amber Lens - 20' Pigtail
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of TecNiq Trailer Lights - Clearance Lights - TN47MR

Hi, everyone, Steve here with etrailer.com. Let's take a look together at our mini clearance or side marker light with included grommet. Now, this is gonna be a submersible light in amber with an amber LED and amber lens, and they're even gonna give you 20' pigtail lead as well. Folks, these are super small, yet powerfully bright. It's a round LED. It serves as a front or side marker and clearance light for your trailer.

And they even give you a 20' extension included for these bullet-style connectors. And on the other end, it's just two wires in this jacketed sheath, so a nice addition as well. I do wanna shut off the overhead lights in the studio so we can take a better look at this in the dark. As you can see, it's putting a straight line down on the tabletop, so again, whether it's front or sideways, you're gonna be visible up to 180 degrees of visibility with this light. And it's a premium LED, so it's energy efficient, long lasting, vibration, (light tapping) impact resistant.

It's rated for over 100,000 hours of lighted use. And again, it's just a simple 12-volt connection with the two bullet-style connectors on the end. And of course, you have the rubber grommet here for installation as well, and you'll pop that off for installation, pop it through the hole, and that's what's gonna hold it in place, again, along with the 20 foot pigtail, here. You'll match white to white, black to black. And then, of course, the other end, you'll have hardwired into either a junction box on your trailer or wherever you're installing it on that trailer, however you're doing that on your end.

Now, this light is, again, I mentioned a 3/4". It's 1" diameter overall with the grommet and everything, and 7/8" thick overall on the thickness. Folks, that will wrap it up for our quick look together. I'm Steven, thanks for watching, and reach out if you have any other questions about this or any other product. Have a good one.

.

Ratings & Reviews

4.7

265 reviews
5 Stars
(221)
4 Stars
(32)
3 Stars
(4)
2 Stars
(4)
1 Star
(4)
Review Sort Icon
by:
by:
These clearance lights are an exact replacement for those on my Wells Cargo trailer, whose grommets had rotted from exposure to the sun. Etrailer's list of their product's specifications made it easy for me to order the correct part. Shipment was immediate. I'm a happy repeat etrailer customer!
by:
Exactly what I needed and a perfect fit. eTrailer had them shipped and delivered within a few days, which was great! As always, great product selection and service!
by:
Matched the bulbs in my shoreland’r trailer perfectly, the plugs were a different size. I just heat shrink soldered the new one on. Probably a better connection anyway. No problem
Mike L. profile picture
Etrailer Expert

Mike L.

4/30/2026

We're glad to hear that, good job!

by:
Plug and play just like OEM! Great product and price!
by:
Excellent product I will recommend to friend , excellent communication with buyer
Thank you guys !
Nick S. profile picture
Etrailer Expert

Nick S.

12/1/2025

That is great to hear! I am glad the process was easy and I hope the install was as well. It looks great on your vehicle!

by:
Product itself is great. I'm not familiar with trailer wiring, so if there is a standard wire gauge that is typically used that's on me for not knowing it, but it would be nice if it were included in the product description. Aside from that, I am extremely satisfied with my item.
Mike L. profile picture
Etrailer Expert

Mike L.

2/18/2026

The pigtail wires are 16-gauge which is typical. Hope that helps!!

by:
More info on size of marker lights. Was replace 3/4 lights on a Tritons snowmobile trailer with clam shell on it. They work just not as bright as old lights.
by:
Great clearance lights for my new ebike rack!!
by:
These lights were exactly what I needed and replaced some broken ones on a trailer fender. Good quality and were as advertised.
by:
Great replacement light however the wiring is reversed from the lamps on my unit.
by:
They are great just what i was looking for super Brite and easy install
by:
a fun little project, I put new tail lights on my trailer and found out I had one bad wire , so I pulled new wires and added these onto my Roller guides , look really nice!
by:
Perfect fit to replace one that was damaged on our trailer.
by:
When I first installed it, it seemed to be dull but it was because I didn’t have a good ground.
by:
The RV clearance light are much better than original ones. They are brighter and set closer to the surface. I replaced 2, 1 red and 1 amber and they fit perfectly. Wire color code was different, but just touch wires together and if it lights connect it.
by:
Great service and light exceeded my expectations
by:
Nice and bright
Easy installation
by:
Excellent thank you
by:
Great lights.
by:
Work Great. Good quality.
by:
Working great
by:
I bought the red lights and the amber lights. The polarity between the two is different. You need to be aware of that when you’re wiring them up.
by:
These little lights are bright and perfect for a 3/4" hole. Easy to install and wire up.
by:
Escellent form factor for a side marker for a custom flatbed.
25
265
true
Show More Reviews

See what our Experts say about this TecNiq Trailer Lights


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Steven C
Installed by:
Steven C
Employee Ryan G
Installed by:
Ryan G
Employee Wilson B
Updated by:
Wilson B
Employee Justice A
Updated by:
Justice A
Employee Joshua U
Video by:
Joshua U

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924