PVC Grommet for Peterson 2" Round Clearance and Side Marker Lights - Flush Mount - Black

Video Transcript for Review of Peterson - Trailer Lights - 146-18

Today, we're going to take a look at the grommet for Peterson 145, 146, 164, 165, and 166 series trailer lights. This is going to be a black PVC construction and it's going to have that recessed mount design. You will have to drill a 2-5/16ths" diameter hole for the installation of this grommet.But it's going to give a little shock absorption for our light. I have one of the lights that will fit with this. This one in particular is going to be a 146 model lights. So as you see that just pops into place, it kind of finishes off the look of our light itself and again, it gives a little bit more protection for it as well.Now, the light and the harness to power that light, those are all sold separately, but you can find a lot of options here at etrailer.dot com for any of your needs.

This is going to measure about 2-3/4s" in diameter going from the outside edge to outside edge. And then it'll be about 1" deep. It's is going to have that black PVC design, and this is made in the USA.That's gonna do it for our look at the grommet for Peterson, 145, 146, 164, and 166 series trailer lights in black.