150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years of use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 7" Silver/11" red, perforated.
Features:
Specs:
Use this reflective tape to clearly mark your truck or trailer in accordance with DOT regulations. Optronics Reflexite conspicuity tape stays where you put it. This tape boasts the strongest adhesive in the business, and 100% of the tape sticks to the surface you are applying to - there are no grid lines or pockets to fill with water and cause tape lift. The technologically advanced tape allows light to strike each of the three surfaces of its microprism. That gives you more reflective surface area than a glass bead, so the tape reflects up to 250% more light. The tape is perforated so it's easier to install. Optronics conspicuity tape allows other drivers to see your truck or trailer from a long distance away.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Optronics Conspicuity Reflective Tape. The alternating red and silver reflector tape makes your truck or trailer more visible in low light conditions. When it comes to the silver, that's going to measure 7 inches long, and then the red is going to measure 11 inches long. That's going to be the same throughout the entire tape roll. It's going to feature technologically advanced micro-prismatic designs that's going to provide superior long-distance visibility. It's also going to feature impact resistance.
What that means is that the unit is going to maintain performance, even through rough conditions. It will withstand high-pressure washing. It can be cut or riveted without damaging its ability to reflect light, and it's got that durable construction, which means no delamination. It's got a UV top coating that's designed to resist fading. It's going to protect the coloring of the unit. It's going to feature high-strength adhesive, so it's going to resist the edge of the tape area lifting.
The whole back side of it is going to measure 2-inch thick. This has 100% adhesion, so 100% of the tape is going to stick to the surface you're applying it to. There's no grid lines or pockets that can fill with water. That's going to be the most common cause of tape lift. You don't have to worry about that with this design. It is Department of Transportation compliant.
It's going to feature the Department of Transportation certification that's clearly marked directly on the tape, and it's going to easily apply to flat, round, or curved surfaces. It's made of a really nice, flexible, polyester metalized film, and it is repositionable. During the installation, it cures in 24 hours, so just keep that in mind. The entire tape roll length is going to be 150 feet long. It's going to measure 2 inches wide, and it's going to measure .008 inches thick.
Nice, very low profile design. That's going to do it for today's look at the Optronics Conspicuity Reflective Tape.
they are what they are
Great service, Great product, Thank you.
perfect shape
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.