EPDM rubber boot with 15/32"-32 thread. Protects against salt spray. Resists weather and ozone. Can be used on toggle switches with 15/32" diameter mounting stem.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ryan Hey everybody, Ryan here at etrailer. Today we're gonna be checking out the Pollak rubber cover for toggle switches. These rubber covers are a nice accessory to go with your toggle switch. By putting it on there, it's just gonna help keep it in a little bit better condition, keep it outta the elements. And I feel like that's especially important on, you know, applications that are gonna be outside, like a boat or a camper, for example. So just a small detail that you can, you know, kind of capitalize on to keep everything in better condition.
The way this is gonna work is it's going to thread on to the base of your switch. So this is designed to work with bases that are 15/32s with a 32 thread pitch. So most of the light, medium duty type switches is gonna be, you know, work with and this whole deal from end to end is gonna be about an inch long. So gonna work with the majority of switches out there. And so it really, it's just gonna replace the existing ring on there that's holding it on, just kind of slide into place.
And since it has that nut inside, you know, this will actually lock your switch down and keep it tight. There is also these half boots available as well, if you'd prefer that, where this really just covers up the base and the rest of the switch will be exposed out of it. Honestly, I like the complete coverage, but I could see a use for this, if you happen to have a toggle switch that was, you know, quite a bit longer than this one and this just didn't have the length to actually cover everything up, that's where this one would come into play, 'cause the rest of the switch would go through and at the very least you'd have the base and all those, you know, that opening there completely sealed up. So, that's always an option for you as well. Other than that, you know, not really a whole lot to it.
I'd say the most important thing is to make sure you have the correct base and switch for this to thread onto. And if you do, chances are pretty good, this will work out for you. But that'll finish up our look at of the Pollak rubber switch cover.
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
EPDM rubber boot with 15/32"-32 thread. Protects against salt spray. Resists weather and ozone. Can be used on toggle switches with 15/32" diameter mounting stem.Still in good shape was a nice addition to the toggle switch I bought as well.
We love all the products we have purchased. Well designed and very easy to install.
Fit perfectly on Suburban Furnace vent. Easy to install.
Just what we needed to waterproof the switch we purchased.
My whole order came in quick and all seems to be great quality. Can't wait to get everything installed
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.