bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24791
lowest price pledge
Retail:$314.89
Our Price: $162.46
You Save: $152.43
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 19 lbs
Quantity: 
In Stock
Draw-Tite Trailer Hitch - 24791
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24791 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (161)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24791

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Draw-Tite
  • Visible Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24791 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60913 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24791 Installation instructions

This Product Fits The Following Vehicles


Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.

Tongue Weight (TW):
200 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Access hole will need to be enlarged. No drilling required for installation




California residents: click here



Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24791

Average Customer Rating:  4.6 out of 5 stars   (161 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

- 24791
by:
2001 Honda Accord

My goal was to install the hitch on my 2001 Honda Accord in the amount of time suggested for the product (50 minutes). It took me about 90 minutes. The only slow down was enlarging the access holes in the frame. I didn't have an air chisel like in the video, so I tried a file. No luck. Dremel. No luck. Finally used a cold chisel and hammer to slightly enlarge the access holes. The wire that fishes the bolt into the frame hole worked GREAT! Couldn't have done it without that. All the holes lined up perfectly. I did need an extra set of hands to support the hitch while I got the washers and nuts started on the frame support. Everything torqued down like it's supposed to. Cons: Be careful to not knock the bolt up into the frame rail after you remove the "fishing wire". I did, and it took a while to fish the bolt back out. Even with the frame bolts loose, the bolt for the tow hook bracket seemed to be about 1/2" too short. My bolt did not go all the way through the nut, even when torqued to the 75 ft/lbs that was recommended. I'll be watching this nut and bolt to see if they loosen up. Unless I missed it, the directions don't tell you which way to turn the toothed washer. I turned them towards the frame of the car. In conclusion, I'm very happy with the hitch. The customer service of etrailer is top notch. I placed my order on Friday afternoon and on Monday, it arrived. I called to ask what to do when the bolt disappeared into the frame rail and the lady I spoke to was very helpful. I used her advise and got the bolt back out in a few minutes. I would definitely order another hitch from this company.


Comments
Well after using the hitch for a year, I am still very happy with it. I use it to pull a lightweight kayak trailer. The mount is still tight and the finish on the metal is still like new! When I buy another car, I will order another Hidden Hitch from etrailer.com.
Michael C - 01/21/2015



- 24791
by:

Installation went great on a 2000 Honda Accord. My fiancee's car had really rusty muffler hangers so it took a bit longer due to extra care, but the trailer fit exactly. You can definitely do it yourself with adequate time, but had I had a helper for the final moments of installation it would've sped it up by several minutes if someone else had lifted the receiver as I screwed it into place. Be safe and good luck.



- 24791
by:
2000 Honda Accord

Fairly easy install if you have a lift, watch the you tube video for spacer and washer placement at the accord tow hook. I used a chisel and hammer with three wacks on each hole of the frame, cake to install.



- 24791
by:

I bought this a year ago and I never regretted it since. It has made many tripes over 1000 miles and has not failed. The only thing wrong was the guy up in my car because it’s the coupe. We got it to work and have not had a problem since.



- 24791
by:
1999 Honda Accord

A pretty quick install especially with the help of the provided bolt leaders. The bolt leaders saved a ton of stress and time. Fits great and works perfectly with my 1UP-USA bike rack.


Comments
The same as the day I installed it. PERFECT!!
Brian D - 09/25/2020


- 24791
by:

Had a local mechanic installed it for my 2001 Acura TL about a year ago. This is a solid hitch receiver. It was easy to order from etrailer, received the product on time. I bought a Tyger 4-bike rack that has both the 1-1/4" and 2" hitch connection options. So far so good.



- 24791
by:
2001 Honda Accord

2001 Honda Accord Coupe 6cyl This was a fun project and one that I did mostly on my own. Out of convenience, I had someone hold a flashlight for me twice, but could have managed without it if I had to. The install was relatively easy and only took about an hour because I read these reviews and the install guide first. The grinding of the access holes didn't take very long. You don't need to do a ton of grinding. As others have mentioned, a longer carriage bolt is definitely necessary on the tie down hook (closest to the bumper). I was able to get the nut on, but had to leave the washer off. I didn't have to purchase extra spacers. I just made sure to crank it tight. I'll probably go get a longer bolt and add the washer though. The one thing that was a little strange to me is that the hitch seems just slightly crooked. Just enough to be annoying. We'll see what it looks like after I put my bike rack on it. If it's too crooked, I'll just have to add a thin spacer on one side. The purchasing process was flawless and I would highly recommend using etrailer.com. Great customer service and the shipment actually arrived early. Thanks!



- 24791
by:
2001 Honda Accord

The installation of the hitch was not that difficult, it took me about one hour. The enlargement of the hole is done in one spot of the hole so that the rectangular spacer and the head of the bolt can fit through the hole, enlarge the hole a little bit at a time and try to see if both fit in, I used a chisel to enlarge the spot. Where the hitch hangs in the middle with a 1/2x2 bolt it is better to use a bolt that is 1/2 longer, the 2" bolt provided is not long enough to hold all the spacers.



- 24791
by:
Honda Civic

The hitch fits almost perfectly. A little tweaking was necessary but is typical in this type of application. I had an almost identical hitch on my Honda Civic and had years of serviceability. It looks good and works great! Thank you etrailer.com for great pricing and exceptional service!



- 24791
by:
2015 Honda Accord

I bought this for my 2002 Accord to haul my bikes. Works great. Took 15 minutes to install. Great instructions and parts.


Comments
Still works perfect
Cody - 08/31/2017



- 24791
by:

Worked flawlessly. Company kept me well informed of order progress. Arrived within promised timeframe (quicker than expected). Would recommend more packing material on narrow ends. One was poking through box on arrival but, there was no damage. Will order from the in the future.



- 24791
by:
1999 Ford Edge

The drawtite receiver hitch I ordered for my 1999 Honda Accord arrived in 2-3 days and was well packed and in excellent condition. I backed the car so that the rear area extended over the edge of a 4' retaining wall at the edge of my parking area, so access for installation was good with the use of some knee pads. Installation was easy after watching the videos online...and the hitch fit well. I did put a small dent in the bottom edge of the gas tank to help with positioning, but after all was in place and the bolts snugged up, it appeared that that may have been more for my convenience than by necessity. I am very pleased with the hitch and the service provided by E-trailer. I am using it primarily with a heavy duty bike rack from Kuat, and also as a backup tow vehicle for my Demco dolly if I need to move it somewhere. (I tow the Honda on the dolly behind my bus when we go on trips.)


Comments
Yes, everything is working perfectly.
Donald - 01/26/2018



- 24791
by:

Excellent product and service. Fast shipping. Not meant for heavy-duty towing, but is good for very small trailers like for a small dirtbike/ATV or kayak/canoe trailer. Also good for bike holder attachments or similar.



- 24791
by:
Acura

Had to install the rear bolts before the front one due to incredibly tight fit in a 2003 Acura. The "snake coils" worked like charms. I also only lowered the mufflers and did not have to disconnect either one. Nice package, including a custom made trailer light connection that fit right into the Acura wiring harness.


Comments
Fine! I mainly use it as a parking “guide”.
JohnK - 01/10/2018



- 24791
by:

Works great.



- 24791
by:

would work better for the honda accord application. it is so far under the cars bumper that my bike rack will not fold up. otherwise it is good



- 24791
by:

The product fit well and the etrailer video was spot on. However, as I torqued the bolts holding the hitch to the accords with a Snap-On click style torque wrench, that has been calibrated, one of them stripped out. Fortunately a hardware store was down the street and I could get a bolt to replace the failed fastener. If you did this at home and didn't have any fasteners laying around I'm sure you would be very unhappy as I was. With bolt replace everything worked well including the wiring harness from etrailer. I would buy again I just would be prepared for the unexpected.



- 24791
by:
2001 Honda Accord

I use this hitch with Thule Apex 4 bike rack. I thought that there might be some play with the 1-1/4" receiver, but the rack is just as solid with the 1-1/4" receiver as it is with the 2" receiver on my other car. It works well for a bike rack. As for the short carriage bolt for the center rear mount, the supplied bolt is log enough (barely), but use a large set of vise-grips to hold everything together tightly, this will let enough of the bolt threads to be exposed to start the nut. Once that bolt is started, you can release the vise-grips and then torque the bolt to spec. Once torqued down, the bolt holds just fine.



- 24791
by:

Tailer has held up well unfortently for my make and model I would of had to do alot of metal cutting to get the washers above the bolt seates inwas able to get them one two of the frame contact points however one of the washers I was unable to install. It has been a very solid porduct with the of couse if youre leaving youre hitch on in saltwatee eviorments puting a coating of marine grease in were the ball hitch goes. Will go a long way. My only isuee is I ordered a ball kf improper size and the cost of shiping would of make the return not worth doing.. I ordered the correct size my only other recommendation is make sure youre trailer touge lock is tight and I would keep youre chains tight. Which this mount allows you to do. When my tounge lock needed to be tighened down and I lost my 6000 dollar kayak the place where you can put the chains was a life saver on what would of been a very costly mistake .. Overall a very solid product.



- 24791
by:
1998 Honda Accord

Fit like a glove. Fast easy installation. Great price and super fast delivery. Great customer support. Thanls



- 24791
by:
Ford Edge

etrailer - shipping was fast. I think it took 3 days. Arrived in an oversized box that it broke through slightly, but arrived undamaged. The hardware was bagged and taped to the hitch to assure it wouldn't get lost. Draw-tite - the hitch is made ok. The welds were basic and not of the highest quality, but they'll work. The holes lined up with my frame. The installation process was sound and worked well. I think installation was about 2 hours. I used the crescent wrench technique to open up the frame holes a bit. That worked well. I tried to use a file for about 3 seconds realizing the absurdity of that. The bolt puller wire worked well. Tip: I was concerned with accidentally pushing the bolts back up into the frame when trying to mount the hitch. Wrap just a bit of masking tape around the bolt right at the frame to keep it from pushing through the hole. Installation time excludes the time it took to run to get a new carriage bolt as the one supplied only engaged a few threads of the nut at the bumper. The bolts for the frame sides were fine. So, expect to have to get a new carriage bolt as the 2" one supplied wasn't nearly long enough. My only complaint is that once installed, the frame side nut is in the area previously used to allow the muffler to move on the muffler hangers. Now, the nut is directly over the front most edge of the muffler, has about 1/4" clearance and the muffler hits it on every bump that the car hits. I can't see this would be any different for any other hitch that uses this mounting hole in the frame though so i can't fault Draw tite. I anticipate having to buy/install muffler hangers that are slightly longer to provide enough clearance.



- 24791
by:
2001 Honda Accord

This is the second hitch i bought from Etrailer.co Both have been great purchases. and have installed exactly how they show them on their video's in under the time listed. we use them for our bike rack which we also purchased of etrailer.com. My wife and i comment just about every time we use them how great of an investment they have been. Will use Etrailer.com for future hitch purchases when we change vehicles and likely another bike rack if our needs change in the future. Shipping is always very fast and affordable. Products are quality. As for customer service i cannot comment as all of my orders have always been correct and carried out in a timely fashion.



- 24791
by:
2000 Honda Accord

Just installed this on my 2000 Honda Accord 2 door v4 coupe. Some tips: - There is one mounting hole that is blocked by muffler, you don't need to remove the muffler to access it, just simply unhook the 3 muffler rubber hangers, and the muffler can be pushed to the side and you will be able to access the hole, but with limited space, enough to get the job done, but your arm will definitely be sore afterwards. - The access holes are too small to fit the plate through, simply file the hole as all other people have mentioned, it took me about 10minute to get the first one done, but then the one above muffer is too hard to file due to limited space, so instead file the access hole above the muffler, I filed the plate for 15min and it works too. - The other guy has mentioned that the bolt that connects the rack to the rear tie down hook (hook on the middle of the trunk) required a couple spacer washers, it happened to me too, it just doesn't fit properly and need additional washers to fill the spaces. and I also need a 3" bolt since the original 2" bolt is not long enough to accommodate the extra space. Make sure to get grade5 or grade8 matching carriage bolt if you need one. Overall, it was an ok job, took about 2hrs. the things I had to purchase for this: - jack stand: $25 - spacers: $2 - file: $5 - extra 3" bolt: $5 - torque wrench/sockets: borrowed from a friend. I am deducting one point since I had to use extra spacers, otherwise it's a good product.



- 24791
by:
Ford Edge

A little harder to install than advertised. Had to pound in one side of the spare well slightly but metal was very flexible. Don't scrape off the rubbrr undercoating. Did not remove the wire leads. Used them to hold the bolt while I screwed the nut on. Otherwise bolt easily pushes back into the beam. Put both nuts on first without washer. Tightened them. Then remove nuts one at a time, put washer on with teeth facing up, then put nut back on and then did the same with the second washer and nut. Bolts are kind of short and it was too hard to get the nut on with the washer the first time. Afterwards I cut off the dangling wires from the leads. But now the hitch is on really tight. I will check it after towing for a few miles and retighten. I think this hitch is better than the one where you have to drill holes in the wheel well. Seems very strong and tight now. Hammered the edge of the plates in the side of the holes to widen them. Easier than using a file. Needed to detach three rubber muffler hangers and pull muffler down slightly to get the steel plates in the hole. Whole job took about two hours. I drove my rear wheels up on four inch blocks and slid the cardboard box underneath to make a good work area. Otherwise hondas are too close to the ground. Have fun.



- 24791
by:

I would like to thank Bridget A. for placing my order, making suggestions for additional products and providing the complete cost including shipping. My order was tracked and the daily information was emailed to me up to the time of delivery at my front door. The instructions to install the hitch and the electrical hookup were informative and I also watched the video for my vehicle on your site. I have been using the hitch and it works great I would recommend etrailer.com for anyone in the market for a hitch.


33
179
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch



  • Availability of Vertical Class I Hitch for 2002 Honda Accord Sedan
    For your 2002 Honda Accord Sedan there is no vertical hitch offered. The unit you referenced, model 28501 for the Scion xB, is not adaptable to your Accord. We offer three options in a light-duty Class I hitch for your Accord; all can be seen on the link provided. The most cost-effective option is the Draw-Tite # 24791. This hitch installs without drilling and the installation instructions are linked for your reference. The required mounting hardware is included. Installation of any hitch...
    view full answer...
  • Removing Muffler From Hangers to Install Draw-Tite Class I Hitch Part # 24791 on 1999 Honda Accord
    As long as the exhaust is located in the stock position, you do not have to remove any exhaust components. To allow easier access to the mounting location, the rubber isolators that the muffler hangs from will need to be temporarily removed from the pins that they hang from. Once the hitch is in place the fasteners torqued to the correct rating, the muffler is re installed onto the hangers. I will include a link to the installation instructions, which will make this a bit clearer. I will...
    view full answer...
  • Is a Wiring Harness Required for Trailer Lights or Do They Come With a Trailer Hitch
    The wire that you see in the pictures for the Draw-Tite Trailer Hitch, # 24791, is called a fishwire or bolt leader. It is used to pull bolts and other hardware needed for hitch installation into place in hard to reach or otherwise inaccessible places on the vehicle frame. I have included a link to the installation details for this hitch below. The trailer hitch will allow you to tow a trailer but you will need a separate wiring harness to power the lights on the trailer. The most common...
    view full answer...
  • What Size and Grade are the Install Bolts that Come with Draw Tite Hitch 24791
    The bolts that come with the Draw Tite Trailer Hitch part # 24791 are 1/2”-13 X 1 1/2” and are Grade 5.
    view full answer...
  • Using Hitch Mounted Bike Rack on 1998 Honda Accord Equipped with Flat Bar Receiver
    Thank you for your photo. In order to use a receiver-mounted bike rack on your 1998 Accord, you will have to remove your existing flat bar hitch and replace it with a hitch that uses the square tube receiver, like the Draw-Tite Class I, part # 24791. The Shadow Mount receiver you reference is obsolete, and I am not aware of any accessories available that are compatible with it. Although the Softride Dura you mentioned is a great bike rack, it will not be compatible with the Class I receiver...
    view full answer...
    Image 1 for
  • Hitch Pin Hole to Outer Most Edge of Bumper Measurement on Trailer Hitch for 2003 Acura TL
    I was unable to locate the exact hitch pin hole to outer bumper measurement for the Draw-Tite Sportframe Trailer Hitch # 24791 and Curt C11290 when installed on your 2003 Acura TL. However, I did got out to our warehouse to take a look at both hitches and provide you with a measurement that will help in deciding if either one will provide a better bumper clearance dimension for your hitch-mounted bike rack. For both trailer hitches, I measured from the center of the mounting hole where...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch Receiver for 1998 Honda Accord
    The trailer hitch receiver I recommend for your 1998 Honda Accord is the Draw-Tite Trailer Hitch Receiver # 24791. This is the best option for a hitch because it does not require drilling to install, unlike the other hitch that fits your Accord, the Curt # C11290. I have added a link to a video install for you to check out as well of the Draw-Tite Trailer Hitch Receiver # 24791.
    view full answer...
  • Cargo Carrier for 1999 Honda Accord and 2007 Toyota Camry Hybrid
    The cargo carrier you mentioned, the Curt 20 by 48 Cargo Carrier, part # C18145 would work just fine with either vehicle if it is equipped with a receiver hitch. The cargo carrier also includes an adapter that will allow the carrier to be used in vehicles with a Class III receiver. A receiver hitch is what would bolt to the vehicle behind the back bumper. The Curt Cargo Carrier you referenced, part # C18145 would slide into the receiver hitch. Receiver hitches are typically vehicle-specific,...
    view full answer...
  • Will Draw-Tite Hitch Trailer Hitch, # 24791, Fit On 2002 Honda Accord V6
    Yes, the Draw-Tite Trailer Hitch, # 24791, will work on your 2002 Honda Accord V6. It is a bolt-on installation, no drilling or welding. There is a access hole in the frame that needs to be enlarged for a bolt to fit through, but it is a done with a file. The hitch comes with a drawbar, pin and clip. You would need a hitch ball, either a Tow Ready Hitch Ball with 1-7/8 inch Diameter and Short Shank, 2000 lbs GTW - Chrome, # 19256, or a Tow Ready Hitch Ball with 2 inch Diameter and Short...
    view full answer...
  • Recommended Hitch for 2000 Honda Accord 2 Door
    The Curt Class I Receiver Hitch, part # C11290 is a fit for your 2000 Accord. If you were planning on using the hitch for an attachment point for a bike rack, keep in mind that the reinforcement strap part # 18050 must be used or else the manufacturer warranty will be void. Might I make a suggestion? The Draw-Tite part # 24791 receiver available for your vehicle does not require a reinforcement strap and attach to the vehicle frame instead of the trunk pan which make for a stronger connection...
    view full answer...
  • Recommendation For Trailer Hitch For 2002 Honda Accord 2-Door Coupe
    Yes, I have a hitch for you! I recommend the Draw-Tite Sportframe Trailer Hitch Receiver, Item # 24791, that is a confirmed fit for your 2002 Honda Accord Coupe. It is a Class I, 1-1/4 Inch light duty hitch that lets you tow a trailer, carry a bike rack, or carry a cargo carrier. It has a maximum capacity of 2,000-lbs and a maximum tongue weight of 200-lbs. It bolts on and is very durable. This hitch is a confirmed fit but keep in mind that your Honda has a maximum towing capacity...
    view full answer...
  • Bike Rack Recommendation for 60 lb Schwinn Cruiser Tour on 1999 Honda Accord
    It sounds like you're looking for a trunk mount bike rack, but these types of racks aren't designed to carry the weight of an e-bike, so that isn't an option for your application. Instead, I recommend the Kuat Transfer V2 Bike Rack for 1 Bike # KU64FR which is confirmed to fit with your 1999 Honda Accord as long as you have a trailer hitch installed. This rack can carry a single bike with a maximum weight of 60 lbs and the rack itself only weighs 26 lbs, so it's super easy to take on...
    view full answer...
  • Fit of Trailer Hitch, Installation of Hopkins Vehicle Wiring Harness for 2000 Honda Accord Coupe
    The trailer hitches we offer for the 2000 Honda Accord are confirmed to fit all models of the Accord, so they will work well on your coupe. The Draw-Tite Class I Sport Frame Receiver Hitch # 24791 that you referenced will work well on your Accord Coupe. I highly recommend this hitch because, unlike the Curt hitch option, Draw-Tite's hitch warranty does not require a stabilization strap to be used when carrying non-trailer loads such as bike racks or cargo carriers. The Draw-Tite # 24791...
    view full answer...
  • Can a Class II Yakima Bike Rack be Used in a Class I Draw-Tite Hitch on a 1999 Honda Accord
    Draw-Tite trailer hitch # 24791 does have the stop in it to prevent the use of Class II accessories. They are moving away from that design but some hitches like this one still have it. But there is another option for your 1999 Honda Accord; Curt trailer hitch # C11290. It does not have the stop in the receiver tube. The only thing is Curt says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their warranty...
    view full answer...
  • Can a Draw-Tite Sportframe Trailer Hitch on a Honda Accord Support a Dirt Bike and Rack
    The combined weight of the bike and the Draw-Tite Sportframe Trailer Hitch Receiver # 24791 would exceed the 200 tongue weight capacity of the hitch. All of the hitches compatible with your vehicle have a similar tongue weight capacity. If you decide to go with a transport trailer you will need a drawbar, ball and wiring kit. A recommended wiring kit is T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118336. A recommended drawbar is Sportframe Drawbar Kit # 3592, and...
    view full answer...
  • Parts Needed to Tow Trailer with 2001 Acura TL
    First things first I want to thank you for your service. Now for the parts needed to tow a trailer with your Acura TL you are on the perfect track! The Draw-Tite Class I Sport Frame Receiver Hitch # 24791 that you referenced is confirmed to fit your 2001 Acura TL and is the exact hitch I would have recommended because unlike the Curt alternative it won't require any drilling during installation. It features a 2,000 pound towing weight capacity and a 200 pound tongue weight limit. I...
    view full answer...
  • Towing Capacity of 2000 Honda Accord V6 Automatic Transmission
    I managed to locate an online copy of the 2000 Accord Owners manual. On page 186, Honda states that the maximum towing capacity of the vehicle is 1,000 lbs and that the maximum tongue weight load (downward force applied to hitch) should be no more that 100 lbs. The Curt Class I hitch you referred to does indeed connect to the spare tire well. I would recommend the Draw-Tite # 24791 which attaches to the vehicle via the tow loop and the frame members. The hitch includes a pin and clip,...
    view full answer...
  • 1-1/4 Inch to 2 Inch Hitch Adapter For 2002 Honda Accord
    We do not have a trailer hitch with a 2 inch receiver opening that is a confirmed fit for the 2002 Honda Accord. However if you install # 24791 and use Hitch Adapter 1-1/4" to 2" Trailer Hitch # HTAD that will give a 2 inch receiver opening. You will need 5/8" pin for 2" receiver # PC3 and 1/2" pin for 1-1/4" receiver # PC2 Please note that tongue weight capacity of hitch will be reduced by 50% with use of adapter.
    view full answer...
  • Trailer Hitch and Bike Rack Recommendations for a 2002 Acura TLS
    The only trailer hitch that fits your 2002 Acura TLS and that does not require the use of a stabilization strap is Draw-Tite hitch # 24791 and it will only fit if the vehicle has the 3.2 liter motor. The hitch is mostly hidden because of how far back it mounts. You would have to be right behind the vehicle and low to the ground to see the cross tube. If your Acura has the 2.5 liter motor then the only option is Curt trailer hitch # C11290 which does require stabilization strap # 18050...
    view full answer...
  • Trailer Hitch Recommendation for a 2002 Honda Accord to Carry Bikes
    For a trailer hitch I recommend # 24791. The other hitches will either come with a ball mount, which you will not need for a bike rack, or require a stabilization strap for non-trailer loads. The Draw-Tite hitch # 24791 is just the hitch and hardware and it does not require a strap for non-trailer loads. Once installed from the center of the hitch pin hole to the back of the rear bumper is approximately 5 inches. The 1-1/4 inch to 2 inch adapters with a rise such as # HT5R would end up...
    view full answer...
  • Will a Trunk Mount Bike Rack Like The Thule # Th910XT Fit on a 2000 Honda Accord with Rear Spoiler
    The best option for your vehicle would be a hitch bike rack and a receiver hitch installed on your vehicle. The Draw-Tite Class I Trailer Hitch, item # 24791, would make a great choice for carrying bikes on your vehicle along with the Thule Helium Aero 2 Bike Carrier for 1-1/4 inch and 2 inch Hitches - Tilting - Hitch Mount, item # TH9042PRO. I cannot recommend a trunk mounted bike rack for the 2000 Honda Accord 2 or 4 door with a spoiler attached to the rear of the vehicle. The spoiler...
    view full answer...
  • Two Bike Rack Recommendation for 2001 Honda Accord 2-Door With A Rear Spoiler
    To carry two bikes on your 2001 Honda Accord 2-Door with a spoiler your best bet is to use a hitch like the Draw-Tite Class I 1-1/4 Inch Hitch, part # 24791 and a hitch mounted bike rack like the Thule Helium Aero 2 Bike Carrier, part # TH9042PRO. I am including links to the instructions on the hitch and the Thule bike rack. If you want to stick with a trunk mount rack, the Hollywood Racks Expedition, # HRF6-2, is my recommendation. This bike rack has arced arms to go up and over factory...
    view full answer...
  • Will Draw-Tite Trailer Hitch # 24791 Fit on a 2001 Honda Accord Coupe and Other Parts for Towing
    You have the right hitch. The Draw-Tite Trailer Hitch # 24791, will work on all models of the 2001 Honda Accord. I have included a link to installation instructions for you to review. Along with the hitch you will need the following items to complete your towing setup. A Properly Sized Hitch Ball, 1-7/8 inch, item # 19256, or 2 inch, item # 19258 Draw-Tite Ball Mount, # 3592 Wiring, item # 118336 You may also be interested in a hitch lock, item # e98879, to secure the ball mount in your...
    view full answer...
  • Availability of a 2 Trailer Hitch Receiver for a 2000 Honda Accord
    I do have a possible solution for you to use your bike rack with your 2000 Honda Accord, but unfortunately there are no 2 inch trailer hitch receiver available for your Accord. Out of the available trailer hitches I recommend going with the Draw-Tite Sportframe Trailer Hitch Receiver # 24791. This has a Gross Towing Weight (GTW) of 2,000 lbs and a Tongue Weight (TW) of 200 lbs. According to page 167 of your owner's manual your Accord can handle up to 850 lbs. This includes all occupants,...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924