Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
This item does not fit your vehicle
1990 Ford Taurus
These items fit your vehicle
1990 Ford Taurus
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
good product good service
Hitch exactly as expected. Installation easy. Shipped and received in short time. Faster than expected.
Great Price - Easy Install30 minute install from start to finish. Enlarge the holes in the frame, then bolt into place.
The hitch drawbar was exactly as advertised and fit the vehicle perfectly. I think the manufacturer is a little overly optimistic about the 30 minutes installation time - however, if have access to some simple hand tools and aren't uncomfortable with working while lying on your back, it is doable in an hour (+/-).
(NOTE: the sheet metal which forms the unibody frame member is easier to deform than might be imagined, I used a 12 inch length of 1/2 inch pipe to deform the holes to the necessary dimension to admit the bolt head and reinforcing plate and it was no problem at all.)
Good hitch,difficult install. It states a 30 min install but you can count on a 2 hour job. Other than that it's a great hitch and
an excellent price.
Overall pleasedNot a 30 minute install, took me about 60 minutes and i'm some what handy with then tools. Would have been very simple if it wasn't for the muffler being in the way.
25 minute installI installed this in about 25 minutes tops. File out the large openings juat a little to get the bolt-head & backing plate through and bolt up with no problem. Nice quality product. Simple install.
Everything worked very well. I had to open up the holes in the frame a little to get the bolts through. Thankfully it was described in the instructions.
Despite the naysayers (Custom fit and bolts right in? Yeah, sure!), that's exactly what happens. Thanks for a great product and customer service!
Great Price / Easy InstallTook only 30 minutes to install, most of that time was enlarging the holes in the frame. I used a dye gringer rather than a file. Once I enlarged the holes it took less than 10 minutes to actually install the hitch.
Happy with service, delivery, & price. Installed last weekend with no problems and everything worked without a hitch! (pun intended)
Buy this. I know next to nothing about fixing cars and I put this in. I was lazy and didn't lower my muffler, and it still only took an hour. Use a rounded file and a set of plumbers pliers to make the hole large enough to slip the bracket and bolt in. Line it up a head of time because the directions are a bit confusing. Did this on a 2000 crv. Use it mostly for a bike rack.
as advertised Good product for the money, install was a little tricky.
Put the car on ramps,
detach the muffler from the rubber connectors and use a jack to support it so you don't have to disconnect it. I used a large box wrench to bend the hole in the car frame so the metal hardware they give you would fit after that it's pretty straight forward with the directions. It would take me 10 min to install if I had to do it again...
WOW!!!!! great communications, FAST FAST Ship &
Best Price anywhere.............................
These folks have it all together!!
No need to go anywhere else, save time and goto etrailer.com first.................
The Draw-Tite Hitch is the best product in the market.
Thank You
Jim
Hitch was just as advertised. There wasn't a video specifically for my 1997 Honda CRV, but watching one for another brand installed on a 2000 gave me enough of an idea to figure it out. Lowering the exhaust and filing open the holes was easier than I thought. I had my son help me hold the hitch while I secured the bolts. It was really pretty easy. I recommend watching a video for the electronics too, but I didn't need to take off as much trim as they recommend. Really simple and secure all the way around. 45 minutes, not including watching the Youtube videos, which again, are well worth your time.
Product arrived incredibly fast and was in perfect shape. Install time is accurate, though can be faster if you drop the muffler out of the way and use a good half-round file. Do a pre-mount line up for the hitch before fishing the bolt into the frame, the directions show two different holes for the mounting location, but only one is correct. You will enlarge the hole you will be mounting the hitch to.
After that minor snafu, the hitch went on with no problems at all and looks great under the car.
Great product, great value, great service, great experience. Can't beat that.
The trailer hitch I ordered fit my 1999 Honda CRV with very minor modifications which were described in the instructions. The installation was extremely easy and was completed in less than 30 minutes. The quality and functionality of the hitch is excellent, it will be used to trailer kayaks. I am very satisfied with this product.
Not hard to put on looks great. Getting hole over the muffler took some time. Tried drilling like the video, no good. The tried cutoff wheel, still no room. Got small air saw and it was a snap, made two slits and bent it out of the way and bam. Would have been under an our had I used the air saw from the start. Great price and good quality hitch. You don't need a class III on a CR-V as you can't tow anything that big anyway, just unnecessary extra weight. This hitch is perfect.
Perfect, quick service; great visual presentations; exact needed product and very fast shipping??
Not to mention nobody beats your prices.!!
Ps. this is my 4th trailer hitch!!!!
Gwendolyn Y.
3/3/2025
Hey Doc! Thanks for all the kudos! Truly! What are you going to be haulin with your CR-V?
After watching an internet video showing how to install the trailer hitch and wiring harness, the whole process was very easy. I did change things a little in that I used dish detergent (instead of whatever spray the video used) to lubricate the rubber bushings which hold up the exhaust system. They slid off fairly easily. In my 2000 CR-V there is a covered storage pocket on the floor right beneath the speaker where the wiring harness plugs in (see photograph). There is a plastic fastener which attaches the cloth pocket to the plastic sidewall. I removed the fastener and lifted up the pocket. After plugging the trailer wire into the connector at the speaker, I fed the trailer end of the wire harness in back of the plastic sidewall and down and out into the pocket. I put the cloth liner back and this pocket serves as a great place to store the wire harness when not in use. This alternate procedure removed the necessity of unfastening the plastic sidewall and the transom on the tail of the car -- two things which did not want to come loose anyway. So, with a few modifications everything worked great and the trailer now rides behind my CR-V!
Trailer hitch bolted up to my CRV with no issues. Extremely fast shipping.
The 24790 trailer hitch for my 1998 CR-V is the best improvement I've made. It fit perfectly. You have to attach the center bolt first and then draw up the two sides bolts. The light hitch & receiver remind you that the CR-V is not made for heavy loads. I use a Hitch-Haul with it, loading a maximum of 200 lbs. The Hitch-Haul is stable on 6" rock, gravel, and improved roads in the mountains at 4-7,000 feet, perfect for an elk hunt. Thanks, etrailer, for a great product at a great price.
Fred Z
Fred Z.
11/9/2018
Great, George, Ive installed three of them over the years. I always have a difficulty of some kind, but you guys always have an answer. Its working great on all there vehicles.
The hitch is compatible to Honda CR-V (model 1998) and apparently fits well. One must be careful to adjust the exhaust system and check the engine rotation for smooth operation, otherwise it could produce noise. The electrical wiring is easy to install with little effort. My purpose is specifically to haul garden and landscaping items and this is a worth spending.
The class 1 trailer hitch was just what I needed to pull my small utility trailer. The draw tite hitch is well made and was easy to install. The only problem I had was the instructions that came with the hitch. They were useless. If it wasn't for the video on the etrailer web site I would have been lost. The video gives you step by step instructions. After viewing the video it only took me about 30 minutes to install the hitch.
Richard S.
3/24/2020
It is doing great
I called Etrailer late on a Friday afternoon (6:30 PM) not expecting a real live person to answer. But, there she was, not only a real person, but an Etrailer employee! In just minutes, the hitch was ordered, with a delivery day of the following Wed. Delivery day met: PERFECT! The unit fit our Honda 2000 CRV like a glove. Easy installation. Trailer ready now for towing our 9 1/2 foot wooden sailing skiff. I would certainly and highly recommend this Etrailer product and personal to all interested in a great experience. Many Thanks.
Paul
2/9/2016
P E R F E C T !!!!!! Many Thanks !
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Fred
11/15/2017
Hitch is doing great. Wiring harness is working perfectly Thanks