Will the Draw-Tite # 24790 Work with a Thule Helium Bike Rack on a 2000 Honda CR-V
Updated 11/09/2010 | Published 11/08/2010 >
Products Featured in This Question
Question:
Bought a Draw-Tite and Thule Helium Aluminum 3 bike carrier from you earlier in the year for my Civic Si. Just picked up a 2000 Honda CR-V for my duaghters. Would like to add a hitch to be able to use the same carrier. Would there be clearance issues with using the bike carrier with respect to the rear mounted spare tire? Thanks for your help.
asked by: Todd F
Expert Reply:
The Draw-Tite Class I Receiver Hitch, item # 24790, would be a good choice for your 2000 Honda CR-V. You will be able to use the Thule Helium Aero Aluminum 3 Bike Carrier, item # TH9043PRO, on the CR-V as long as the measurement from the center of the hitch pin hole to the farthest out part of the spare tire is less than 14-3/8 inches. If the measurement on the CR-V is going to be longer than that the Helium rack would not fit properly.
There are other options if the Helium rack will not fit. One option would be to use a spare tire mounted bike rack. The SportRack 3 Bike Carrier, item # SR2813, will work on the CR-V. You would not need a hitch for the CR-V with this option.
Another option would be to purchase a Class III hitch like the Curt Trailer Hitch, item # 13314, and a Hitch adapter like the Hitch Adapter 2 inch to 1-1/4 inch, item # 80300. With this option you would definitely be able to mount the Helium rack on the back of the vehicle and carry up to 3 bikes as long as you stay within the reduced capacity of the lowest rated item in the system.
By reduced capacity I mean that, with the extender, the vehicles tongue weight capacity and the hitch tongue weight capacity will be reduced by 50 percent, so the bike racks and bikes can weigh no more than 1/2 of the lowest rated item in the systems tongue weight rating.
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Where is etrailer Hitch e23AR Made
- Q&A: How To Order Replacement Hardware Kit For Curt Trailer Hitch
- Q&A: Is the Mopar 82216418AA Wiring Harness Required for Flat Towing 2022 Dodge Durango R/T
- Q&A: What Steps Should You Take To Prevent Rust After Enlarging A Hole To Install A Hitch
- Article: Determining Trailer Tongue Weight
- Q&A: Trailer Hitch, Bike Rack, And Hitch Extender For A 2001 Honda CR-V
- Q&A: Reinforcing Plate for a Thule Adventurer Cargo Box
- Q&A: Recommended Replacement Hardware Kit for a Curt Trailer Hitch on a 2000 Honda CR-V
- Article: How to Choose a Spare-Tire-Bike Rack
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Lighting Requirements
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: My Trailer Hitch Doesn't Fit


