Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

See what our Experts say about this CURT Trailer Hitch

• Trailer Hitch Receiver Capacity for 2006 Cadillac STS AHK
  We do not have any trailer hitch for your 2006 Cadillac STS that is able to tow that much. We only have the Class I hitch # 24767 from Draw-Tite or # C11307 from Curt. Both of these are rated for 2,000 lbs maximum.
  view full answer...
• Recommended Trailer Hitch and Bike Rack for 2011 Cadillac CTS
  The trailer hitch I recommend for a 2011 Cadillac CTS is the Curt Trailer Hitch Receiver part # C11196 for coupe or part # C11307 for sedan models. These will both work great with a hitch mounted bike rack. The bike rack however will need to have a 1-1/4" shank and be class I rated. I recommend the Thule Roadway 4 Bike Rack part # TH934XTR for this. It has anti sway cradles and an anti-rattle hitch pin for added security. Even though it is a 4-bike rack, you will only be able to carry TWO...
  view full answer...
• How to Determine Towing Capacity for a 2005 Cadillac STS
  The final authority will be the owner's manual of your 2005 Cadillac STS, but from the research I did it looks like the max towing weight for your vehicle would be 1,000 lbs. The Curt hitch part # C11307 has a 2,000 lb capacity, but a towing setup is only as strong as the weakest component so you would be limited to 1,000 lbs regardless of what hitch you use. For trailer wiring you would want the part # C59496, ball mount part # C45522, pin and clip part # F-4, 1-7/8 ball part # C40001,...
  view full answer...
• Can a Cadillac CTS-V Tow a Trailer
  I do have an option for you depending on what year your Cadillac CTS-V is but they do not offer a trailer hitch with a 2" receiver tube for this vehicle. As you mentioned, power is not an issue on the V model but other factors such as frame strength come into play when trailer manufacturers decide if they will offer a trailer hitch with a 2" receiver tube for the vehicle. Now, with that being said a 2" receiver tube is not required to tow a trailer but you will need to abide by the towing...
  view full answer...
• Will Curt Hitch # C11307 Fit 2010 Cadillac CTS Sedan and CTS-V Sedan
  I spoke with my contact at Curt and he told me the Curt Class I Receiver Hitch # C11307 is a fit for both the 2010 Cadillac CTS-V Sedan, and the 2010 Cadillac CTS Sedan. The Curt Hitch includes a pin and clip. If you plan on doing some light duty towing you will need a ball mount like # C11307, a hitch ball like # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring use Curt Vehicle Wiring Harness, # C56044. I have linked to the hitch's installation instructions...
  view full answer...
• Trailer Hitch and Bike Rack Recommendation for a 2010 Lexus ES350
  The only available trailer hitch option we carry for the 2010 Lexus ES350 is Curt Trailer Hitch, # 12343. I have included a link to the installation details below. This is a Class II trailer hitch with a 1-1/4 inch receiver. The bike rack you choose will need to be compatible with this size trailer hitch. Curt also states that per their warranty requirements, a stabilizing strap must be used on non-trailer loads, # 18050. For a compatible bike rack, I recommend the Thule Helium, # TH9042PRO....
  view full answer...
• Comparing The Available Trailer Hitches For A 2008 Cadillac CTS
  All of the hitches available for the 2008 Cadillac CTS have the same characteristics in terms of towing and tongue weight capacity. Each hitch has a 2000 pound towing capacity and 200 pound tongue weight capacity. Where they differ is the towing components included with the hitch. The Draw-Tite Trailer Hitch, part # 24767, which is the lower priced hitch, does not include a drawbar, pin or clip. The Curt Hitch, part # 11307, which is the highest priced hitch for your vehicle includes a...
  view full answer...
• Trailer Hitch Recommendation for a 2010 Cadillac CTS
  The location and visibility of a trailer hitch on your 2010 Cadillac CTS will be almost identical between Curt, # C11307 and Draw-Tite, # 24767. Each of these trailer hitches use the same mounting location and have practically the same dimensions. For an exact measurement, the end of the receiver from the Curt hitch will actually sit 1/8 of an inch closer to the rear edge of the bumper. As far as aesthetics are concerned, I agree that the Curt hitch has a more pleasing design. We have...
  view full answer...
  
• Best Class I 1-1/4 Trailer Hitch for a 2007 Cadillac CTS
  We have hitches for your 2007 Cadillac CTS but there are no class II or above. The class rating system is based on weight and capacity of your vehicle and your cars towing capacity is only 1,000 lbs. The Curt Hitch item # C11307 is the best hitch for your car and will allow you to use your the full capacity available. If you need a wiring harness to control your trailer or accessories lighting functions you will need the Curt Wiring Harness with 4-Pole Flat Trailer Connector item # C59236. For...
  view full answer...
• Correct Ball Mount for Curt Trailer Hitch Receiver 11307 on 2010 Cadillac CTS Sedan
  For a Class I hitch that fits your 2010 Cadillac CTS such as the Curt Trailer Hitch Receiver # C11307, the hitch manufacturer specifies the exact ball mount that you will need to use with the hitch. For this hitch, the one that Curt specifies will be plenty long enough at 11-1/4 inches long, the Curt Drawbar # C45522. With this ball mount you will also need the Pin and Clip # C21410 and a hitch ball (which depends on the size of your trailer's coupler), either 1-7/8" Hitch Ball # C40001...
  view full answer...
• Is Fascia trimming Required to Install CURT Trailer Hitch 11307 on a 2005 Cadillac CTS
  According to the installation instructions for the CURT Trailer Hitch # C11307, there is no trimming required on a 2005 Cadillac CTS. I have included a link to the installation instructions for you. If you are planning on doing some towing, this hitch comes with the correct ball mount, hitch pin and clip. For a ball you can use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring use Curt Vehicle Wiring Harness, # C59236. I have included a link to the installation...
  view full answer...
• Will Curt Trailer Hitch Fit 2013 Cadillac CTS Luxury Sedan
  Yes, the Curt # C11307 will fit your 2013 Cadillac CTS Luxury Sedan. The hitch features a bolt-on installation and comes with a limited lifetime warranty. If you plan on towing, you can use the # C56044 for wiring. This will give you a 4-way to power your trailer's signal lights. For a ball mount, check out the # 3594 along with the # C40001 for a 1-7/8" or # 19258 for a 2" ball.
  view full answer...
• Trailer Hitch Options for the 2006 Cadillac SRX, CTS, DTS, STS, Escalade and Escalade EXT
  If you have a 2006 Cadillac SRX then you can use Curt hitch # C13050 or Draw-Tite hitch # 75174. If you have a 2006 Cadillac CTS or STS you can use Draw-Tite # 24767 or Curt # C11307 which are both Class I, 1-1/4 inch hitches. If you have a 2006 Cadillac DTS you can use # 36287 or # C12058 which are both Class II, 1-1/4 inch hitches. If you have a 2006 Cadillac Escalade or Escalade EXT you can use Class III hitch # C13422 or Class V hitch # C15324. If you have a 2006 Cadillac XLR there...
  view full answer...
• Is There a Trailer Hitch that Fits 2010 Cadillac CTS-V
  As long as your 2010 Cadillac CTS-V is a sedan model the Curt hitch part # C11307 does fit. If you have a wagon or coupe then there are not hitch options available.
  view full answer...

Do you have a question about this Trailer Hitch?