Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 10,000 lbs with the 2-5/16" ball.
Features:
Specs:
Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.
To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.
Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.
When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.
The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.
A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.
When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (4044 Customer Reviews)
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 10,000 lbs with the 2-5/16" ball.I've always got a different trailer hooked up to my rig and this is the only hitch you will ever need! Extremely smooth operation, beautiful finish and quality. I'd say I'll buy another when needed, but you can tell this thing will last forever. Great service and shipping from etrailer!!
I have been searching for a hitch that answers all of my questions and concerns. I finally purchased the Tow & Stow hitch. It is the absolute best hitch that money can buy. I would highly recommend this hitch. Great item.
This is truly the last hitch you'll ever need to buy, unless of course you get a new truck with a larger hitch (example, my new F350 with 3"), in which case you'll probably want that one too!
A great product. Looks good on the back of my truck. It is very heavy and appears very well built. It would be nice if the unit had the main bar 4" down and 1" above the main shank or any combination similar giving 1" on the short side of the shank. In my case I would like the ability to turn the ball base up but have the ability to have the ball 1" below the shank. The other improvement would be locking clips for the pins.
I have used several similar ball mounts from other manufacturers and the B & W is by far the best. The fit and finish are exceptional and the ease of operation make this mount system well worth the money!
The website was easy to navigate through. They had many products to choose from. It was easy ordering. And it came sooner than I thought It would. On top of all that I believe It's the best looking hitch out there. Sincerely, Ricky R.
Exactly what I needed for my 2018 Ford F-150 4x4. I have a boat and a 10’ cargo trailer with a drop axle. I can raise it up for my boat and lower it for my cargo trailer. I can also leave it on in the stow position and park my truck in my garage!
Very nice hitch!! Easy to adjust to my 4 different trailers and 2 trucks.
The hitch is heavy and well made. The service from etrailer was great.
This is the best hitch I have ever owned.
Very well made product which is easy to use and adjust as needed.It is a very helpful product when you have different equipment like I do on my farm,thanks guys!
Jeremy Peterson
Opened up package yesterday product looks great. Have not installed ball on truck yet.
Jerry G.
6/16/2017
Just worked out real good very good hitch I like the three ball setup on it
Great hitch terrific service ordering
Have owned black one before with better results. After 1 winter- pins were unable to be removed even with penetrating oil and sledge hammer. Fortunately, BW customer service is completely taking care of me with new black one with no argument. 5 star service. 4+ star on black version. 1 star on chrome one.
Great look and usefulness. However, didn't work on my car because it was too low and scraped when I exited my driveway. I have a Mercedes GLS and never thought of it. My fault.
very fast delivery happy with item
Randy ..
8/19/2023
Its been a great hitch love it
For once I got what I paid for!!!!!!!
Awesome hitch and looks great
Heavy duty, very easy to setup different configurations!! The finish looks great! Hoping it holds up!
Very heavy duty. Fast delivery. Was a little more expensive but we'll worth the price and made in the U.S.A!
Love it!
Product was delivered timely and as advertised. Very nice and durable product.
Its Simple, Sharp looking and gets the job done!
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
11/2/2016
Thank you for taking the time to read peoples honest input. The B