Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Zinc Balls - 4" Drop or Rise

See what our Experts say about this Andersen Trailer Hitch Ball Mount

• Distance from Center of Ball Hole to Furthest Hitch Pin Hole
  The distance from the center of the ball hole on the Andersen Ball Mounts # AM3460 to the hitch pin hole furthest away from it is 9-5/8 inches.
  view full answer...
• Which Andersen Rapid Hitch Adjustable Ball Mount for 2008 Suburban and 2009 Silverado
  In order to make a recommendation about which ball mount would be best for your needs, I'd really need to know the coupler height of the trailer when it's level. Give that the average coupler height is between 16 and 19 inches. Based on that, I'd recommend the # AM3410. Both the ball mounts you mentioned are the same price. You might as well get the model that offers the most flexibility.
  view full answer...
• Will There be Rattle When Using Rapid Hitch Adjustable Aluminum Ball Mount Kit # AM3460
  As you note, the primary value of this aluminum ball mount # AM3460 from Andersen is the range of adjust-ability which enables it to work with a variety of trailer and vehicle heights, and both 2-inch and 2-5/16-inch coupler sizes. If you typically tow more than one trailer on a regular basis this convenience may outweigh any minor rattle in this system. It is also light in weight at 19-lbs compared to steel ball mounts. It is true that this adjustable ball mount has three mechanical joints...
  view full answer...
• Lock For Rapid Hitch Adjustable Ball Mount For 3 Inch and 2 Inch Receiver
  We can get you a hitch lock that will work with your 3 inch and 2 inch hitches, but there isn't a separate keyed alike option that allow you to use one key to lock the platform and the ball mount to a 3" and 2" hitch. So what you will need to do is get separate locks that use different keys in order to lock both the platform and mount with the Rapid Hitch Adjustable Ball Mount # AM3405 or # AM3460. What you can use that will work are the following: - InfiniteRule Locking Pin for Andersen...
  view full answer...
• Adjustable Ball Mount Recommendation for a 2015 Ford F-150
  As long as you have a 2 inch hitch installed on your 2015 Ford F-150 Super Crew the Rapid Hitch part # AM3460 that you referenced would fit and work well. I couldn't find any reports that the ball mount interfered with any sensors.
  view full answer...
• Recommended Trailer Hitch Receiver and 7-Way Wiring For 2002 Ford F-150
  The Curt Trailer Hitch Receiver Class IV - 2", # C14355, is a confirmed fit for your 2002 Ford F-150. This hitch has a 1000 lb tongue weight rating and a 10,000 lb maximum gross trailer weight rating. This will come with the hardware to install it. I've attached a video of this installation as well as the instructions for you. There is no drilling required for this installation, but your spare tire will have to be lowered or temporarily removed for installation. To use this hitch receiver...
  view full answer...
• What Holds the Adjustment Pin in Place on Rapid Hitch Adjustable Aluminum Ball Mount Kit AM3460
  If you have adjustable coupler # AM3460 then it sounds like it is all there based on your description. Take a look at the picture I have included that shows the clip through the hole on the pin that holds on the ball platform. If this is how your set up looks then it is correct. If it is different than this email me some pictures and I can determine if anything is needed.
  view full answer...
  
• Replacement Ball Assemby and Housing for Andersen Rapid Hitch Adjustable Aluminum Ballmount # AM3460
  The Andersen Rapid Hitch you mentioned, part # AM3460 includes a 2 inch and a 2-5/16 inch trailer ball. Anderson does indeed offer a replacement ball assembly that includes the 1-7/8 and the 2 inch trailer ball, part # AM3425 or if you prefer the grease-less AlumiBall, it's available as part # AM3436. If you need the replacement ball housing for the AM3400 series (like the AM3460 you referenced) it's available as part # AM3423.
  view full answer...
• How To Choose Correct Ball Mount for a 2016 Dodge Grand Caravan
  The trailer hitch I recommend for a 2016 Dodge Grand Caravan is the etrailer Trailer Hitch Receiver part # e98854 which has a hitch height of 13". The difference in hitch height of the trailer will be the rise/drop you need to look for in a ball mount. I always recommend an adjustable ball mount as this allows you to tow multiple different height trailers. The Rapid Hitch Adjustable Aluminum Ball Mount Kit part # AM3460 is a great choice made of aluminum so it's lightweight and has multiple...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?