Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.
Features:
Specs:
The Pro Series Pilot comes equipped with time-delayed braking. Every time you apply the brakes in your vehicle, a signal is sent - via the brake switch - to the Pilot. The controller then sends power out to your trailer brakes to activate them with an intensity set by you, at a rate determined by you. The amount of braking power (output) can be adjusted to suit your preference, the road conditions, the type of trailer, and the weight of your load. To determine which levels are best for your application, test your towing setup and choose what feels right.
Braking output is the maximum amount of power that will be applied to your trailer's brakes. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. You want to set the braking output as high as you can without locking up the brakes. Once you've set up the brake controller the first time, you shouldn't need to adjust the settings until the trailer load changes, you switch trailers, or road conditions change. Use the thumbwheel on the side to change the braking output level. The output setting will appear as a number on the digital display, with a higher number indicating higher braking power.
The Pro Series Pilot keeps the manual override within easy reach on the front of the module, great for stopping sway or controlling your trailer's momentum in emergencies. Push the slide-bar to activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Because inertia plays no role in the functioning of this controller, you do not have to mount the unit at any particular angle. Your mounting options are limitless, so long as you can still easily access the controller and manual override. The Pilot is especially flexible; its microprocessor allows the controller to even be mounted upside down, and it will still give you a readable display. The Pilot can go wherever you need it. Plus, the included wiring adapter eases installation overall. The custom connector end plugs into the port on your vehicle and the other end plugs into the controller.
You can use etrailer's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at part number 80550. This is the Pilot 2-6 Brake Time Delayed Electronic Brake Controller from Pro Series. It's going to work for 2-6 brakes, which is going to be up to 3 brake axles. One of the main features I want to show you is the large, easy to read dual-digital disk play. I have it connected to our power source. That way, you can just get a really quick look at how easy that display is to see.
Nice, quick response time too. Please keep in mind that this installer must be installed with a 12 volt negative ground system. It's going to provide flexible mounting options and can be installed in any direction. It's got a microprocessor that's going to allow the controller to be mounted upside down and still have a readable display. It's got a feature protection against short circuit or loss of ground. A standard mounting bracket is included as well as the hardware needed to get it attached.
That's going to go on the side here towards the back of the controller. It's got the mounting slots in there and then you can see the different options that you have as far as a versatile mount. This inaudible 00:01:12 right here is going to be the ball mount interface. It's an optional mounting ball pivot kit that we sell that works with this. It's sold separately. You can find that with part number 5298.
A pulse preventer is also recommended. That's available and sold separately with part number 5501. The wheel on this side of the controller is designed to control and adjust the breaking power. This right here is going to be the manual override or the manual slide knob. The wiring system is a simple plug and play feature that allows for easy and quick connection and disconnection. This is designed for use with electric brakes.
It's going to give us an overall width of 3 1/2 inches, overall length of 4 3/4 of an inch, and then an overall height of about 1 9/16ths of an inch. It's going to be covered with a limited lifetime warranty. If a custom break wiring adapter is not available for your vehicle, one of the following will be required: Either a 20 amp circuit breaker for 2-4 brake applications or a 30 amp circuit breaker for 6-8 brake applications. When it comes to the wiring on this system, your white wire is going to be your ground. Your black is going to be for the positive battery. Your red is going to be for the cold side of the stop light switch, and then your blue wire is going to be for the brake output to the trailer. That's going to do it for our review of part number 80550. This is the Pilot 2-6 Brake Time Delayed Electronic Brake Controller from Pro Series. .
good value but the swivel mount being optional should be made more clear
Great deal
easy to use brake box
Great product
Great brakebox
great brake box
Sells out fast
Thanks for the fastest shipping and awesome pricing. I've used these brake controller for years. Great product and great pricing. Thanks etrailer!
Great brake box. Does the job at a fair price
Good brake box
Great brake box
Good brake control
good brake control not too expensive
Works good, was a little difficult to install because it didn’t match Mercedes Benze wiring.
Product is great but the packaging was damaged. We are in retail so it matters.
big hit
inexpensive and simple to use
Thanks so much. Got what I needed. Really appreciate your business.
Simple and easy to use! Works great!
Great product and price
Website was very user friendly and video of installment was very helpful. Our order came in just in time of us to install and use.
used many, no problems
Received product quickly. Will be using it this weekend!
Great box at a great price
Great product and price
Exactly what i needed.
Do you have a question about this Trailer Brake Controller?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.