See what our Experts say about this Roadmaster Tow Bar Base Plate

• Where Does Base Plate Mount On 1999 Mazda Miata
  That is correct, base plates like the Roadmaster # 711-2 and # 711-4 use the front tie down plate mounts as mounting points. The # 711-4 with removable arms will use the front tie down plate mount and stabilizer bar mounts. The # 711-2 uses the front tie down plate mount and frame. I have attached the written instructions below. In addition to the base plates you will also need the following: -Tow Bar: Roadmaster Falcon 2 # RM-520 -Safety Cables: RoadMaster 68" Single Hook, Coiled Safety...
  view full answer...
  
• Base Plates, Tow Bar, Safety Cables, and Wiring to Flat Tow 1991 Mazda Miata MX-5
  The first item you will need to flat tow your 1991 Mazda Miata are base plates. We carry two different options of base plates for your vehicle. First are the XL Plates, # 711-4. These have removable drawbars held in place with a pin and clip. With the drawbars removed the base plates are virtually invisible. For these, trimming of the spoiler, air damn, grille, or plastic fascia may be required for installation. The other option are Standard Plates, # 711-2. These are fixed brackets and...
  view full answer...
• Parts Needed to Flat Tow 2000 Mazda Miata With EazAligner 2000 Tow Bar
  We have all of the parts you need to flat tow your 2000 Mazda Miata with your EazAligner 2000 Tow Bar, and I'll make a list of what you need to make it easy to order. - Roadmaster Crossbar-Style Base Plate Kit # 711-2 - Roadmaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter # RM-038 - Safety Chains: Roadmaster 68" Single Hook, Coiled Safety Cables # RM-643 - Wiring Kit # RM-15267 - Supplemental Braking System: Demco SBS Stay-IN-Play DUO Supplemental Braking...
  view full answer...
• Base Plate Measurements for Roadmaster Base Plates to Flat Tow a 1991 Mazda Miata
  The first thing you are going to want to do is consult the vehicle owners manual for the proper towing procedure. The brackets on the Roadmaster base plates, # 711-2, are 4-1/2 inches by 3-1/2 inches at the widest and tallest parts. The slotted holes are 1-1/2 inches apart on center and are 1/2 inch wide. I made a picture for you to hang on the fridge. If you can tell me what tow bar you have, I can determine if it is compatible or not. Some tow bars require an adapter. The base plates...
  view full answer...
  
• What is the Most Economical Way to Flat Tow a 1994 Mazda Miata with a Nissan Murano
  I recommend going with the Roadmaster XL Base Plate Kit # 711-4 for your 1994 Mazda Miata because it has removable arms which will give your Miata more of an OEM look when you are not towing it with your Nissan Murano. A more economical option would be the Roadmaster Classic Base Plate Kit # 711-2, but it does not have removable arms. You can use the Tow Ready Adjustable Tow Bar, 5,000 lbs # 63180 that you referenced, but you will also need the Adapter # RM-025 and if you choose the base...
  view full answer...
• Blue Ox Rangefinder II to Roadmaster Base Plate Adapter for a 1999 Mazda Miata
  What you will need to use your Blue Ox Rangefinder II with Roadmaster Base Plates, # 711-2, is the Blue Ox Rangefinder II to Roadmaster Bracket Adapter, # RM-037. This adapter will attach to the Roadmaster base plates and then to your Rangefinder tow bar to tow your 1999 Mazda Miata.
  view full answer...
• Will a Blue Ox Tow Bar Work With Roadmaster Base Plates On a 1991 Mazda Miata
  The Roadmaster Crossbar-Style Base Plate Kit part # 711-2 or part # 711-4 which are fits for a 1991 Mazda Miata will work with a Blue Ox tow bar if you use adapters, the RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter part # RM-033 with Roadmaster Tow Bar Quick Disconnect Kit part # RM-201.
  view full answer...
• Is Installing Base Plate on a 1991 Mazda Miata for Flat Towing Difficult
  You are correct in that base plate kit installs vary quite a bit from vehicle to vehicle. The # 711-2 which is a fit for your 1991 Mazda Miata is actually one of the easiest to install that I have ever seen. I attached a link to the install instructions for you to check out but basically you just hold them in place and run bolts through them to in place. The XL part # 711-4 is also a fit but requires an additional bracket but it still installs pretty easily.
  view full answer...
• Roadmaster Base Plate for 1993 Mazda Miata
  The correct Roadmaster base plate for your 1993 Mazda Miata is the part # 711-2 which is compatible with your Stowmaster # RM-501. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled...
  view full answer...
• Base Plate Kit and Recommended Setup to Flat Tow a 1994 Mazda Miata
  Yes, both the Roadmaster XL Base Plate Kit # 711-4 and the Classic Base Plate Kit # 711-2 for your 1994 Mazda Miata are compatible with all Roadmaster tow bars. I recommend going with the XL # 711-4 because it has removable draw bars which will give you more of an OEM look when you are not flat towing it. Keep in mind that aside from the base plate kit you will need the tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. One...
  view full answer...

Do you have a question about this Tow Bar Base Plate?