Base Plate Measurements for Roadmaster Base Plates to Flat Tow a 1991 Mazda Miata
Updated 11/12/2012 | Published 11/09/2012
Products Featured in This Question
Question:
At the point where the tow bar attaches to the base plate what is the dimenation I have a tow bar and I need to see if it will work with your base plate? Also are the holes designed to fit the factory holes in the Miata the lower two holes on the car are fitted with theraded s already? Thank you looking forward to towing my classic Miata.
asked by: Jim B
Expert Reply:
The first thing you are going to want to do is consult the vehicle owners manual for the proper towing procedure. The brackets on the Roadmaster base plates, # 711-2, are 4-1/2 inches by 3-1/2 inches at the widest and tallest parts. The slotted holes are 1-1/2 inches apart on center and are 1/2 inch wide. I made a picture for you to hang on the fridge.
If you can tell me what tow bar you have, I can determine if it is compatible or not. Some tow bars require an adapter. The base plates themselves bolt directly to tie down mounts already present on the vehicle. These mounts have weld nuts (the threaded parts you see) and the supplies bolts will secure the base plates to the mounts.
In addition to the base plates and tow bar you will also need safety cables like # RM-643. You will also need a light solution for the Miata. I recommend a magnetic light kit like # RM-2120.
Most states now require a supplemental braking system on the vehicle being flat towed. The easiest system to set up and use is the proportional Even Brake, # RM-9400, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
I have included a helpful link to our series of FAQ articles on flat towing for you to view.
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms
- Tow Bar Base Plate
- Fixed Draw Bars
- Visible
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Q&A: What is a Complete Flat Tow Package for a 2001 Mazda Miata Towed Behind a 2021 Winnebago Travato?
- Q&A: What Parts And Accessories Do I Need To Flat-Tow 1990 Mazda Miata MX-5 Behind 2001 Winnebago Brave
- Q&A: Components Needed To Flat-Tow 1993 Mazda Miata Behind Motorhome
- Q&A: Base Plates, Tow Bar, Safety Cables, and Wiring to Flat Tow 1991 Mazda Miata MX-5
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Q&A: Tire Cover Recommendation for a RV Tire Size 235/80R22.5
- Article: Trailer Wiring Diagrams
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Must-Have Flat Towing Components
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited