We'll connect you with nearby partnered installers who know this exact setup.

Roadmaster

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

Part Number: 3111-1

2218 Reviews | 9 Questions

In Stock

$575.00

Retail:$632.50

You Save: $57.50

Not Confirmed to Fit

2001 Ford Excursion

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

roadmaster tow bar base plate partially hidden crossbar-style kit - removable arms

roadmaster tow bar base plate hitch pin attachment partially hidden 3111-1

roadmaster tow bar base plate removable draw bars partially hidden crossbar-style kit - arms

roadmaster tow bar base plate removable draw bars crossbar-style kit - arms

Show All (5) Product Images

Show Fewer Product Images

In Use/Installed

0 tow bar base plate roadmaster hitch pin attachment partially hidden on a vehicle

0 tow bar base plate roadmaster hitch pin attachment 3111-1

0 tow bar base plate roadmaster hitch pin attachment on a vehicle

0 tow bar base plate roadmaster removable draw bars partially hidden crossbar-style kit - arms

0 tow bar base plate roadmaster hitch pin attachment partially hidden 3111-1

0 tow bar base plate roadmaster removable draw bars on a vehicle

Show All (6) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms customer photo

Show All (4) Customer Images

Show Fewer Customer Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

The crossbar-style hidden brackets attach to your vehicle's frame to provide attachment points for your tow bar. The visible portions of the brackets can be removed when you are not towing. Great Prices for the best tow bar base plate from Roadmaster. Roadmaster Crossbar-Style Base Plate Kit - Removable Arms part number 3111-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (2218)
Q & A (0)
Related Parts
Photos

Roadmaster Tow Bar Base Plate - 3111-1

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Ready for Flat Towing: Attaches to your frame to create secure points for your tow bar connection.
Blends In When Not Towing: Removable drawbars leave only hidden brackets for a factory-style look.
Built to Last: Computer-cut, all-steel construction with black powder coat resists corrosion.
Simple to Remove: Front arms release with 2 hitch pins so you can switch from towing to driving quickly.
Easy Setup: No welding required, and hardware and instructions are included for straightforward install.

Features to know about

Made for a Clean Front End: Hidden Bracket Design with Removable Drawbars

If you like a clean, factory look when not towing, this base plate kit delivers. The hidden bracket design keeps the setup tucked out of sight, and the square drawbars remove easily with two hitch pins. Once they’re off, the remaining brackets are virtually invisible and protected within the grille area. It’s a simple way to keep your vehicle looking stock without bulky hardware showing.

Built Strong for the Long Haul: All-Steel Construction with Black Powder Coat Finish

Every piece is computer-cut from all-steel material to provide exceptional strength where it counts. The black powder coat finish resists corrosion and wear, so it stands up to weather and road grime over thousands of miles. The sturdy frame attachment spreads towing forces evenly, helping maintain stability and durability through extended use.

Simple Setup at Home: Bolt-On Installation with No Welding Required

If you enjoy doing your own projects, this kit is ready for a weekend install. It bolts directly to the frame with no welding required, and all mounting hardware and instructions come in the box. The precise fit design helps everything line up cleanly so you can get solid results without special tools or fabrication work.

Stay Flexible with Your Tow Setup: Works with Roadmaster Tow Bars Using Quick-Disconnect Crossbar

Already running a Roadmaster tow bar? This base plate kit fits right in. It’s compatible with Roadmaster tow bars when used with the quick-disconnect crossbar (910021-00 – sold separately). That means an easy connection process that keeps your setup consistent across vehicles while maintaining a secure, reliable link when towing.

Specs

Construction and Design

Bracket style: Crossbar-style hidden brackets
Material: All-steel construction
Finish: Black powder coat finish
Drawbar connection: Removable drawbars secured with 2 hitch pins
Mounting style: Partially hidden within the grille when installed

Compatibility

Tow bar compatibility: Compatible with Roadmaster tow bars with use of quick-disconnect crossbar (910021-00 - sold separately)

Installation

Installation type: Simple installation - no welding required
Included components: Instructions and mounting hardware included

Country of Origin and Warranty

Made in: USA
Warranty: Limited Lifetime Warranty

3111-1 Road Master XL Base Plate Kit

Installation Details 3111-1 Installation instructions

This Product Fits The Following Vehicles

2002 - 2005 Saturn Vue 4-cylinder Engine

4.8

2218 reviews

5 Stars		(1870)
4 Stars		(262)
3 Stars		(48)
2 Stars		(13)
1 Star		(25)

by: Mark S. 02/06/2017

2004 Saturn Vue

The 3111-1base plate for my Saturn fit very well and can't be seen when the arms are removed. Wonderful product, and I am extremely happy it.
Installation of the trailer receiver was very easy, fit like a glove, and is very solid. It took about 35 minutes. Instructions were very easy to follow. Great job Etrailer!. And thanks to George from Etrailer for the follow up email. You do a super job.

Click to Enlarge

Mark S. One Year Later

2/6/2018

Fantastic! Very happy. Perfect fit and easy install.

by: CRAIG A. 09/14/2015

2005 Saturn Vue

Ordered on Wednesday received on Friday, installed on Saterday,
Easy straight forward and simple instructions, 2hrs. and 10mins.
to install, and an eight hundred number for any questions,
Service representative was helpful and efficient, all and all a good experience...( 2005 Saturn Vue,4cyl )

Craig A. One Year Later

10/11/2016

I am very happy with my Roadmaster tow bar, I have used it to tow my car from Tampa to Tacoma, L.A. to Portland MA. and many places in between with no problems, it is very easy to use and set up and that is what I like the best.... I work for a drive-a-way company delivering school buses and trucks around the country during the summer....Thanks for the follow up, Craig, A.K.A. Atlanta Andy

by: Don E 08/21/2007

This base plate "rocks" - fairly easy install (it's kind of heavy and awkward to hold lying on the ground on your back, but I decided to save money and install it myself - a bit hard to "fit," but it did fit) - REALLY, REALLY strong base plate (attaches in 6 places) Very well thought out. I hate to be hit by a Saturn with one of these installed. It's going to be tough to crumble with this much reinforcement!

by: Gordon L 03/03/2015

I haven't open up the box yet will when the time comes I can install it on the car

by: John 11/18/2022

Absolutely amazed at your customer service!

by: Tony H. 10/04/2017

2012 Saturn Vue

I am pleased with the base plate kit for my Saturn Vue. It was easier to install than I thought it would be, but the directions were not quite accurate. It does not fit between the sub-frame and the mount. I had to put it under. Also after cutting the two tabs on the bumper, I found there was no need to cut them. [too late now]. I also realized that after removing the headlight housings, I didn't need to pay $16.00 for a 12 inch bit. I had plenty of room where the headlights were to drill from the top. It did line up just right for the arms to go right through the lower part of the grill.

by: Larry N 09/19/2019 One Year Later

everything went as planned. Great help and excellent timely shipment. couldn't be happier.

by: Bruce A 07/02/2026 One Year Later

Installation was a bit trying. Ended up looking very clean and almost invisible.
Using the tow bar worked super easy and our motorhome hardly noticed the Mini Cooper back there.

Click to Enlarge

Claire H.

7/6/2026

It really is invisible! It took me a second to even find the base plates in your photo!

by: Christian 05/13/2026

1995 Jeep Grand Cherokee

Bolted right up. Installation should be done with bumper on, as you can't fit the ends through the louvers without some convincing. Works great so far. Was able to use a Stowmaster 5000 with it.

Click to Enlarge

Kate F.

5/14/2026

Thanks for the review and for sharing your installation experience Christian. Your tip about leaving the bumper on during install is really helpful, especially since fitting the ends through the louvers can take a little extra maneuvering. It’s also great to hear the setup works well with your Stowmaster 5000. The install looks great, and we appreciate you sharing the picture! Where did you go for the first trip?

Christian

5/20/2026

@KateF Hudson Parcher County park in Rainier, OR

Kate F.

5/21/2026

@Christian I just looked it up, looks like quite the magical place! Thanks for sharing =)

by: Robert 01/06/2025

Came quickly and is very high quality. Great directions/video from road master makes the installation step by step easy to follow.
Skill level is probably at the intermediate level depending on experience.

Click to Enlarge

Robert One Year Later

1/7/2026

Everything related to my Mini towing system is working great after a year of use.i do wish I had bought a cover for the tow bar though. Keeping it clean would be easier with the cover. Great products and service from etrailet

by: Robin 11/21/2024

The #118-3 is a perfect fit on my 1995 Geo Tracker. When you pull off the removable arms you would never know they are there. The Quality is very good easy to put on all you have to do is drill 4 holes the tube on the base plate fits into the tube on the frame of the tracker and with the 2 bolts it is a solid fit. I was worried about the plate nut getting it inside of the frame but it went in easy when you put it over the frame tube and use a thin piece of metal to slide it in place. I’m very happy with it. I probably could of got it on without taking my bumper off but with only 4 bolts holding my bumper on it made it easier

Click to Enlarge

Robin One Year Later

11/25/2025

Working great these are durable tow bars Have no problems with them easy to hook up and tows vehicle without no problems .

by: Charlevoixboy 12/10/2025

2007 honda Element

Awesome delivery speed, and a well made base plate for my 2007 Element. Installation was a breeze (thanks to my son’s heated shop) and I had to do no cutting to make this fit. I had a Stowmaster tow bar that came with my RV and etrailer was able to steer me to the correct missing parts to make this a really affordable installation. Now to get out of this snow!

Click to Enlarge

by: Michael 12/03/2025 One Year Later

2004 Subaru Impreza

We towed our 2004 Subaru Impreza WRX STI 3000 miles last year, this is an ideal setup, discreet when not in use, solid, and easy to get on/off. Very please with the support I received from Roadmaster as one of the bolt was missing, was sent super quickly.

Click to Enlarge

by: James 07/02/2025 One Year Later

Replaced same part that was damaged in a crash. I had used my original one for close to ten years without issue. Fast shipping from etrailer.

James One Year Later

7/3/2026

New system working fine. As with previous system it requires towed vehicle to be nearly perfectly aligned straight behind motorhome to disconnect without considerable tension.

by: David 05/23/2025

The Base plate kit is well made and came with all the necessary hardware.Installation is relatively straight forward. I did have to enlarge two of the holes that didn't quite line up. But overall I'd recommend it.

David One Year Later

5/24/2026

It continues to work flawlessly

by: Steven 08/09/2026

Overall the installation was great, however the process of drilling 3 - 1/2" holes in that little bumper that has a Rockwell Hardness of about 60, seems to be a bit over the top.The instructions are spot on, delivery was great, the quality of product was accurate. I am a happy boy!

by: Thomas 07/29/2026

2015 Chevrolet Equinox

Fit and finish is great, the illustration for what you trim on the bumper isn't great but otherwise pretty easy install (I ended up measuring between the mounts on the draw bar and just trimmed accordingly)

Christopher H.

8/4/2026

Thanks for you feedback Thomas! Sounds like the install went smooth. Hope you have a great summer!

by: Larry 05/05/2026 One Year Later

I’ve been purchasing products from ETrailer since 2005 and all the products I’ve purchased have been a great value. The products mentioned above installed perfectly and with the direct assistance from ETrailer everything fit as suggested. I will always interact with ETrailer as needs present themselves.

Claire H.

5/7/2026

Thank you so much for the kind words and being a repeat customer with us! We look forward to helping you out with all your future adventures!

by: Brad 06/22/2026

After ordering the wrong crossbar, etrailer sent the correct one for our Mini Cooper quickly. However I did have to modify most of the holes as the cross bar didn’t quite fit (but close). I had to drill the three main bolt holes to 11/16 so that the bar would go over the Mini’s 3 main bumper bolts on both sides. The two lower bolt holes (each side), needed to be drilled out 3 sizes larger to accommodate the 4 bolts that come with the kit. I had to drill out the Minis lower holes to better align with the crossbars lower holes. I would also like to note it being a pain in the knuckles to reach one of the three (each side) bolts to put the stock nuts on the bolt and then try and get them tight. (The main bolt pattern for the upper bumper is diamond shape, one up tow bolts lower. (The lower “inside” bolt on each side is the one that is hard to get to and tighten.) Sorry I didn’t get picks, I was in a rush to get the car back together. There’s an angle piece on the cross bar that blocks the hard to reach bolt, it would be helpful if that could be made more accessible to reach.

by: Julie 05/30/2025 One Year Later

Purchased for a 1997 Subaru Impreza. Delivery was amazingly fast! I didn't have it installed until a few months later, as my travel plans had stalled. It didn't quite bolt right on, but was close, and a friend had to modify it some to make it work. I still hear a grating noise when I turn too sharp on one side, but otherwise it's fine.
The front connection plates didn't line up with the holes, so had to have those modified, as well, in order to line up and attach to the tow bar. Once the new holes were drilled, I was able to hook up and go.
It's relatively easy to connect after finding a way to do it alone.
I've towed from CO to TX and all over TX with it with no problems.

Click to Enlarge

by: Mike 08/16/2026

Install pretty easy. You will have to change directions of one bolt due to obstruction ( frame). Cannot torque a few of the bolts. These are the ones with wire attached.
Rock guard needed addition trimming from factory instructions.

by: Wesley 07/08/2026

The representative (Sarah) was very helpful and knowledgeable, the prices are very reasonable and all my items arrived on time. When I called with a question, she was very polite, friendly and genuinely sounded like she enjoyed her job. When I discovered one of the items I ordered wasn’t needed, getting help to return was hassle free. I would recommend etrailer to anyone that needs anything RV or trailer related. I will definitely do business with them again. I am impressed.

by: Todd MobileRVHelp 06/02/2026

2022 Chevrolet Trax

Not an easy install on a Trax but it is very well made and gives a clean look. I did customize by cutting down the 6 pin bracket supports to get it flush with front of the car.

by: Rob 01/19/2019 One Year Later

2019 Chevrolet Equinox

The Jeep project went very well everything fit great and worked well. I really love Roadmaster products and quality and your company is the best place to purchase them. I sold the Jeep and replaced it with a new 2019 Chevy Equinox 2.0 L AWD and just purchased and installed the following items from you and installed them, RM-156-25 & RM-156-75 Battery Charge Line Kit, RM-146-7 Flex Coil Kit, RM-523193-4 EZ4 Plate Kit, RM-88333 Custom Seat Adapter, RM-751489 Stop Light Switch Kit and a RM-98160 Second Vehicle Brake Kit w/brakeaway. All these parts were in stock and arrived quickly and normal with you people, I really enjoy the o-line vidios as I do all my own installs. Thank you so much for your great service.
I will attach pictures of my install, you will see how I was able to fab a bracket and attach it to the existing mount on the base plate to mount the brakeaway switch and the air connection for the brake system.
I also fabricated a tail light bar as I didn't want to use mag-lights or splice into the factory lights and bulbs installed into the lights would not work as the factory brake lights will come on when the brake system is applyed and the turn siginals would not be visable.
Thanks for all you do, I would and do recommend you people to everyone who needs your products. Rob

Click to Enlarge

Rob One Year Later

1/21/2020

Everything is working great, I installed a base plate kit, battery charging kit, stop light switch kit, second vehicle air brake kit w brakeaway and seat adapter on our 2019 Chevy Equinox and towed it about 14000 miles behind our motor home this past year and everything worked perfect not a problem with any product. These are great products, everything fit perfectly and performed perfectly. Thank you for great service and great products. Rob

by: Chris 03/15/2019

2015 Subaru Outback Wagon

This was the second base plate kit from etrailer that I have installed, the first being on our ‘03 Outback and this one on our new to us 2015 Subaru CrossTrek. As usual the response, shipping and delivery from etrailer was prompt and curious. They are my go to place for anything towing related.
Installation of this kit went well with only a few issues, most of which were related to our vehicle not the kit. I knew the car had been hit lightly on the LF corner, but could find nothing of concern body or frame wise when I looked the car over before buying it. Turns out the front bumper reinforcement had been tweaked a tad which made lining the bolt holes up with the holes in the base plates a tad challenging. This made the small angle brackets that go inside the frame heads tough to line up, but in the end it all fit. I did find that it was unnecessary to pull the washer reservoir or the left headlight to access the nut and washer for the long 1/2” bolt. You can easily reach and see the place from underneath after pulling the plastic encapsulation panel. When drilling that 1/2” hole be sure to angle the drill bit UP a tad otherwise you may end up having to grind a flat on the side of the large, thick washer as you can see in my picture from underneath. I used shrink wrap over the nut and bolt since there’s a wiring harness right against it. The picture of the baseplate differs a bit from the pictures so I guess they made some changes. All in all a great kit!

Click to Enlarge

Chris One Year Later

3/16/2020

It’s been a year now and probably 7,000 miles later and everything has held up perfectly despite some darn rough roads between MD and Albuquerque, NM and back.

2218

true

Show More Reviews

See what our Experts say about this Roadmaster Tow Bar Base Plate

Do you have a question about this Tow Bar Base Plate?

Connecting A Roadmaster Tow Bar Crossbar To A Duncan DM7007
You can use the RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter # RM-038 to connect to the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 3111-1.
view full answer...
Parts Needed to Flat Tow a 2005 Saturn Vue Behind an RV
If your 2005 Satrun Vue is front wheel drive with a 4T45E transmission, then you will be able to flat tow it using a tow bar. If it has a VT25-E or MDRA transmission, you will need a car trailer to tow the vehicle. To determine which transmission you have, you can have a local dealership run the VIN number. If you determine that you can flat tow the vehicle, you will first need base plates. For a 4-cylinder engine model, use XL Base Plates, # 3111-1. For a 6-cylinder that is NOT a Redline...
view full answer...
Parts Needed to Flat Tow a 2005 Saturn Vue Behind an RV
To flat tow your 2005 Saturn Vue you'll need a tow bar, base plates, wiring, and likely a high-low adapter. You'll also want to consult your owner's manual to make sure your vehicle is able to be flat towed without damaging it. An inexpensive tow bar that connects to your RV's hitch ball is the Roadmaster Tracker # RM-020. If you prefer a hitch mount I recommend the Falcon 2 # RM-520. For safety cables to go with the tow bar use # RM-643. The base plates I suggest for your Saturn if...
view full answer...
Recommendation for Towing a 2003 Saturn Vue V6
The only way I can recommend you flat tow your 2003 Saturn Vue is with a tow dolly like the part # RM-2050-1. None of the base plate kits we offer are confirmed to fit the V6 models of your vehicle so I can't recommend them for you. Using a tow dolly will save you a lot of hassle as it won't require any installation time like a base plate kit and wiring kit, and since the tow dolly isn't vehicle specific you can flat tow other vehicles without having to buy more components.
view full answer...
Which Roadmaster Base Plate Kit and Other Parts Do I Need To Flat-Tow My 2005 Saturn Vue
If your 2005 Saturn Vue has the 4-cylinder engine, you will need Roadmaster XL Base Plate Kit, part # 3111-1. If you have the 6-cylinder model, you will need Roadmaster XL Base Plate Kit, part # 3121-1. Note that part # 3121-1 is not compatible with the Redline model. Both Base Plate Kits, part # 3111-1 and # 3121-1 feature removable drawbars, so when the vehicle is not being towed, the base plates are less visible. In addition to base plates, you will also need a tow bar, wiring or lighting...
view full answer...
Economical Tow Bar Options for Flat Towing a 2005 Saturn Vue
The first thing you are going to need to flat tow your 2005 Saturn Vue is a base plate kit. If you have a 6-cylinder model you will need a Roadmaster base plate kit # 3121-1. If you have a 4-cylinder model you will need a Roadmaster Base Plate Kit # 3111-1. I wish we sold something that would adapt base plate kit to the # 74344 tow bar that you have, but at this time we do not carry anything. I would recommend you upgrade to a different tow bar like the Roadmaster Tracker Tow Bar # RM-020. Next,...
view full answer...
Recommendation For 2002 Saturn VUE And Saturn L Series Base Plates
For base plates, I recommend the Roadmaster XL Base Plate Kit, Item # 3111-1, for a 2002 Saturn VUE and the Roadmaster EZ Base Plate Kit, Item # 523102-1, for a 2002 Saturn L. For flat-towing either vehicle, you will also need a tow bar, safety cables, wiring, a braking system, and maybe a high-low hitch adapter. For a tow bar that works with both base plate kits and vehicles, I recommend the Roadmaster Falcon All Terrain, Non-binding Tow Bar, Item # RM-522. For safety cables, I recommend...
view full answer...
Second Vehicle Brakemaster Kit Recommendation for an RV with BrakeMaster Previously Installed
It sounds like your 2003 Alfa See Ya has everything on the tow vehicle side of the equation needed for the BrakeMaster 9000 to work. Because of that all you would need is the RoadMaster Second Vehicle Kit # RM-98160 and the correct seat adapter for your 2005 Saturn Vue, part # RM-88241. For a base plate kit you would want the part # 3111-1 for if you have a 4 cylinder engine or part # 3121-1 for if you have a V6. For lighting you can use the bulb and socket kit, # RM-155, and not have...
view full answer...
Roadmaster Standard Base Plate Kit for a 2005 Saturn Vue
I am sorry, but the 407-1 will not fit your 2005 Saturn Vue. The base plate for your vehicle is the 3111-1, the Roadmaster XL Base Plate Kit. If your tow bar is the Roadmaster Tracker, which has the entry-level towing capacity of 5,000 lbs, then the base plate I just recommended, the 3111-1, is compatible with it. You will need the optional set of quick-disconnects, product RM-201, to use with the base plate and the tow bar. The quick-disconnects are defined as optional on our website,...
view full answer...

Do you have a question about this Tow Bar Base Plate?

Info for this part was:

Written by:

Lindsey S

Updated by:

Adele M

Updated by:

Wilson B

Updated by:

Mike S

Updated by:

Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.